USB-C (USB TYPE-C) Receptacle Connector 24 (6+18 Dummy) - Power Only 6 Pin Position Surface Mount, Right Angle; Through Hole The 2479774-2 specification defines the engineering requirements for a high-density electronic connector assembly intended for board-to-cable or board-to-board interconnection in advanced electronic systems. This specification establishes the functional, mechanical, electrical, environmental, and quality requirements necessary to ensure reliable signal transmission, stable mechanical engagement, and long-term durability in demanding electronic applications. The component is intended for use in systems requiring compact interconnect solutions with high signal integrity and robust mechanical retention. It is suitable for applications such as industrial electronics, communication systems, embedded control units, and high-performance electronic assemblies where reliable connectivity and repeatable mating performance are required. Engineering Requirements The connector assembly shall be manufactured using precision-formed conductive materials and high-strength insulating housing materials to ensure stable electrical performance and mechanical reliability. The design shall support secure mating engagement and consistent signal continuity across repeated connection cycles. Electrical characteristics shall ensure low contact resistance, stable signal integrity, and reliable conductivity under defined operating conditions. The connector shall maintain performance under mechanical vibration, thermal variation, and environmental stress conditions typical of industrial and embedded system applications. Mechanical construction shall ensure accurate alignment between mating interfaces, secure locking engagement, and resistance to accidental disconnection. The design shall support repeated mating cycles without degradation of electrical or mechanical performance. Workmanship shall be free from defects such as contamination, deformation, plating irregularities, or structural inconsistencies that could impact reliability or functionality. Manufacturing and inspection shall be conducted under controlled quality systems using calibrated equipment to ensure compliance with engineering requirements. Any deviation from this specification shall require formal engineering review, documented justification, and approval through established engineering change control procedures prior to implementation. Documentation Supporting documentation shall include engineering drawings, connector datasheets, material declarations, inspection records, qualification test reports, and revision-controlled manufacturing documentation. All documentation shall be maintained under formal configuration management and quality assurance systems. Revision Control All changes to this specification shall be managed through formal engineering change control procedures. Each revision shall undergo technical evaluation, validation, and approval prior to release to ensure continued compliance with design intent and applicable standards. #EngineeringSpecification #Connector #HighDensityInterconnect #ElectronicComponents #SignalIntegrity #EmbeddedSystems #IndustrialElectronics #Manufacturing #QualityAssurance #EngineeringDocumentation

270 V 6.5 kA Varistor 1 Circuit Through Hole Disc 20mm The MOV-20DxxxK Series of 20 mm radial leaded varistor devices protects against overvoltage transients such as lightning, power contact and power induction. The metal oxide varistors offer a choice of varistor voltages from 18 V to 1800 V and Vrms voltages from 11 V to 1100 V. The devices have a high current handling, high energy absorption capability and fast response times to protect against transient faults up to rated limits. Features High voltage and current rating Straight and kinked lead styles available Bidirectional Surge protection Fast response time RoHS compliant* #MOV20D271K #Varistor #MetalOxideVaristor #SurgeProtection #CircuitProtection #OverVoltageProtection #PowerSupplyProtection #TransientSuppression #ElectronicComponents #ThroughHole #IndustrialElectronics #ConsumerElectronics

LED Driver IC 1 Output DC DC Controller SEPIC, Step-Down (Buck), Step-Up (Boost) Analog, PWM Dimming 8-SO-EP # AL8866QSP-13 Engineering Specifications **General Description** The AL8866QSP-13 is an automotive-qualified, multi-topology DC-switching LED controller manufactured by Diodes Incorporated. It is designed to control an external power MOSFET for high-power automotive LED lighting systems. The device supports buck, boost, buck-boost and single-ended primary-inductance converter configurations. Its wide input-voltage range makes it suitable for automotive power systems and various high-voltage LED applications. The controller uses fixed-frequency peak current-mode regulation with spread-spectrum frequency modulation to reduce electromagnetic interference. It supports both analog and pulse-width-modulation dimming through the DIM input. An integrated programmable soft-start function gradually increases the inductor and switching currents during startup to reduce output-voltage and current stress. The open-drain fault output provides system-level fault reporting for abnormal operating conditions. **Engineering Specifications** **Manufacturer:** Diodes Incorporated **Manufacturer Part Number:** AL8866QSP-13 **Component Type:** Automotive LED driver controller **Converter Topologies:** Buck, boost, buck-boost and SEPIC **Control Architecture:** Fixed-frequency peak current-mode control **External Switching Device:** External power MOSFET **Minimum Input Voltage:** Four point seven volts **Maximum Input Voltage:** Eighty-five volts **Maximum Output Voltage:** Eighty-five volts **Switching Frequency:** Four hundred kilohertz **Frequency Modulation:** Spread-spectrum modulation for reduced electromagnetic interference **LED Current Control:** External current-sense resistor and external MOSFET configuration **Feedback Voltage:** Two hundred millivolts **Typical Quiescent Current:** One point eight milliamperes **Typical Efficiency:** Up to approximately ninety-three percent, depending on the application circuit and external components **Dimming Methods:** Analog dimming and pulse-width-modulation dimming **Analog Dimming Range:** One percent to one hundred percent **Analog Dimming Dynamic Range:** Greater than one hundred to one **Pulse-Width-Modulation Dimming Ratio:** One hundred to one at a two-hundred-hertz dimming frequency **Pulse-Width-Modulation Frequency Range:** Approximately one hundred hertz to one kilohertz **Full-Brightness Current Accuracy:** Approximately plus or minus three percent **Low-Level Dimming Current Accuracy:** Approximately plus or minus twelve percent at twenty-percent dimming **Soft-Start Function:** Externally programmable **Fault Output:** Active-low open-drain fault indicator **Protection Features:** Output overvoltage protection, LED open-circuit protection, output undervoltage protection, LED short-circuit protection, cycle-by-cycle overcurrent limitation, current-sense resistor short-circuit protection, inductor and diode short-circuit detection, diode open-circuit protection and thermal shutdown **Automotive Qualification:** AEC-Q100 Grade One qualified **Automotive Documentation:** PPAP capable **Manufacturing Standard:** Manufactured in IATF-certified automotive facilities **Operating Temperature Range:** Minus forty degrees Celsius to positive one hundred twenty-five degrees Celsius **Package Type:** Thermally enhanced SO-8 exposed-pad package **Pin Count:** Eight leads with exposed thermal ground pad **Mounting Style:** Surface mount **Packing Method:** Thirteen-inch tape and reel **Standard Packing Quantity:** Two thousand five hundred components per reel **Moisture Sensitivity:** Level One **Terminal Finish:** Matte-tin-plated leads **Environmental Compliance:** Lead-free, RoHS compliant, halogen-free and antimony-free **Typical Applications** Automotive high-beam and low-beam lighting Automotive daytime running lights Automotive fog lights Automotive turn-signal lights Automotive position lights Automotive brake and stop lights High-power exterior LED lighting Multi-topology automotive LED driver modules #AL8866QSP13 #AL8866Q #DiodesIncorporated #LEDDriver #AutomotiveLED #AutomotiveElectronics #BuckConverter #BoostConverter #BuckBoostConverter #SEPICConverter #PowerElectronics #LEDLighting #ElectronicComponents #EngineeringSpecifications

10 kOhms 0.5W, 1/2W Through Hole Slide Potentiometer Top Adjustment Type TB0153-2010BPB103 is a single-gang linear slide potentiometer from Bourns' Pro Audio PTB Series. It features a 10 kΩ resistance, 100 mm travel, and 0.5 W power rating, making it suitable for audio mixers, industrial control panels, lighting consoles, musical instruments, and other applications requiring precise manual analog adjustment. Its through-hole mounting and durable construction provide reliable performance and long operational life. Key Features 10 kΩ resistance Linear (B taper) response 100 mm slider travel 0.5 W (1/2 W) power rating Through-hole PCB mounting ±20% resistance tolerance Top-adjust slider design Designed for professional audio and control applications Durable carbon resistive element Standard single-gang configuration #Bourns #SlidePotentiometer #LinearPotentiometer #10kOhm #ProAudio #Fader #VariableResistor #ThroughHole #ControlPanel #ElectronicComponents

Crystal, 12 MHz, SMD, 3.2mm x 2.5mm, 30 ppm, 10 pF, 30 ppm, ABM8 Series ABM8-272-T3 is an ultra-miniature surface-mount quartz crystal from Abracon designed for precision clock generation in embedded systems and microcontroller applications. The crystal operates at 12.000MHz in fundamental AT-cut mode and is packaged in a compact 3.2mm × 2.5mm × 0.8mm ceramic SMD package. It features ±30ppm frequency tolerance and stability, 10pF load capacitance, 50Ω maximum ESR, and low drive power requirements. The device operates across an industrial temperature range of -40°C to +85°C and is hermetically sealed with MSL1 moisture sensitivity rating. The ABM8-272-T3 is approved for use with Raspberry Pi RP2040 and RP235x microcontrollers and is suitable for embedded controllers, IoT devices, communication equipment, industrial electronics, and precision timing applications. Search Keywords: ABM8-272-T3, Abracon ABM8, 12MHz crystal, 12.000MHz crystal, quartz crystal, SMD crystal, ceramic crystal resonator, RP2040 crystal, RP2350 crystal, Raspberry Pi crystal, clock crystal, oscillator crystal, timing crystal, MCU clock source, embedded crystal, surface mount crystal, AT cut crystal, 10pF crystal, 3.2x2.5mm crystal, frequency reference Hashtags: #ABM8272T3 #Abracon #12MHzCrystal #QuartzCrystal #SMDCrystal #ClockSource #Oscillator #TimingCircuit #RP2040 #RP2350 #RaspberryPi #Microcontroller #EmbeddedSystems #IoT #Electronics #ElectronicComponents #PCBDesign #HardwareDesign #FrequencyReference #CrystalOscillator

64 Position Female Connector PCI Express™ Gold 0.039" (1.00mm) Black The PCIE-064-02-X-D-TH is a high-density PCI Express edge connector designed for reliable board-to-board and card-to-host connections in high-speed data communication applications. Manufactured by Samtec, this connector supports PCI Express signaling standards while providing robust mechanical and electrical performance for high-frequency, high-bandwidth systems. Its through-hole mounting and dual-row design ensure secure attachment to the PCB, high mating retention, and long operational life. The connector is ideal for computer peripherals, server systems, embedded computing platforms, networking devices, and industrial electronic equipment where signal integrity, mechanical reliability, and high-density interconnects are critical. Engineering Specifications Manufacturer: Samtec Part Number: PCIE-064-02-X-D-TH Series: PCI Express Edge Connector Connector Type: Board-to-Board / Card Edge Connector Contact Configuration: Dual-Row High-Density Contacts Mounting Style: Through-Hole Contact Material: Copper Alloy Contact Finish: Gold-Plated Contact Surface Housing Material: High-Temperature Thermoplastic Signal Performance: PCI Express Standard Compliant Electrical Performance: High-Speed Data Transmission Mechanical Durability: High Mating Cycle Life Orientation: Right Angle / Standard Edge Mount Operating Temperature Range: Industrial Grade RoHS Compliant: Yes Applications: PCI Express Expansion Cards, High-Speed Computing Systems, Server and Data Center Hardware, Embedded Platforms, Networking Equipment, Industrial Computing, High-Bandwidth Digital Interfaces, Board-Level Interconnects Key Features High-density dual-row PCIe edge contacts Through-hole mounting for robust PCB attachment Gold-plated contact interface for reliable signal transmission Supports high-speed PCI Express signaling Compact, high-density design for space-constrained PCBs Long mechanical life with repeated mating cycles Compatible with standard PCI Express cards and connectors Reliable operation in industrial and commercial environments Ideal for embedded computing, server, and networking applications Ensures signal integrity for high-bandwidth data communication #PCIE06402XDTH #Samtec #PCIeConnector #EdgeConnector #BoardToBoard #HighSpeedInterconnect #HighDensityConnector #ThroughHole #IndustrialElectronics #EmbeddedSystems #ServerHardware #NetworkingEquipment #ElectronicComponents #PCBDesign #HighBandwidth #DataCommunication #PCIExpress #ExpansionCardConnector #MechanicalReliability #ElectronicInterconnect

68 kOhms ±5% 0.25W, 1/4W Through Hole Resistor Axial Automotive AEC-Q200 Carbon Film CFR-25JB-52-68K is a carbon film through-hole resistor from the CFR series by YAGEO. It provides a resistance value of 68 kΩ with ±5% tolerance and a 0.25 W (1/4 W) power rating. Designed for general-purpose electronic circuits, this axial-leaded resistor offers stable performance, reliable operation, and compliance with automotive-grade AEC-Q200 requirements, making it suitable for consumer, industrial, and automotive applications. Key Features Resistance: 68 kΩ Tolerance: ±5% Power Rating: 0.25 W (1/4 W) Carbon film resistor technology Axial through-hole package Operating temperature range: -55°C to +155°C Temperature coefficient: -500 / +350 ppm/°C Automotive AEC-Q200 qualified RoHS compliant Suitable for signal conditioning, voltage dividers, biasing, and general-purpose circuit applications. #CFR25JB5268K #YAGEO #CarbonFilmResistor #ThroughHoleResistor #68KOhm #QuarterWatt #AECQ200 #ElectronicComponents #PassiveComponents #CircuitDesign #commonpartslibrary #passivecomponents #resistor #carbonfilm #throughhole #axialresistor #analog #digital #industrialelectronics

Optical Sensor Through-Beam 0.197" (5mm) PCB Mount The EE-SX4081 specification defines the engineering requirements for a slot-type photomicrosensor designed for non-contact object detection and position sensing in electronic and electromechanical systems. This specification establishes the functional, electrical, mechanical, environmental, and quality requirements necessary to ensure accurate optical sensing, reliable switching performance, and long-term operational stability. The component is intended for use in industrial automation, office equipment, consumer electronics, and embedded control systems requiring precise detection of object presence, motion, or position. The integrated infrared emitter and phototransistor receiver provide dependable sensing through interruption of the optical path, enabling high-speed, contactless detection in compact system designs. Engineering Requirements The photomicrosensor shall be manufactured using qualified optoelectronic components and controlled production processes to ensure consistent sensing performance, mechanical integrity, and long service life. The optical assembly shall maintain accurate alignment between the emitter and receiver to provide stable detection characteristics throughout the specified operating conditions. Electrical characteristics shall provide reliable switching response, stable output behavior, and low power consumption while maintaining consistent sensitivity across the intended operating voltage and temperature ranges. The sensor shall exhibit reliable performance under normal ambient light conditions and shall maintain signal integrity during continuous operation. Mechanical construction shall ensure precise slot dimensions, secure mounting capability, and resistance to vibration, mechanical shock, and thermal cycling encountered during normal operation. The package shall be suitable for printed circuit board assembly and shall withstand standard soldering and handling processes without degradation. Workmanship shall be free from defects including contamination, optical misalignment, package damage, corrosion, or structural irregularities that could affect sensing accuracy or reliability. Inspection, validation, and testing shall be performed using calibrated equipment and controlled quality procedures to verify compliance with engineering requirements. Any deviation from this specification shall require formal engineering evaluation, documented technical justification, and approval through the established engineering change control process before implementation. Documentation Supporting documentation shall include engineering drawings, electrical specifications, optical performance data, qualification reports, inspection records, and revision-controlled manufacturing documentation. All documentation shall be maintained under formal configuration management and quality assurance systems to ensure complete traceability throughout the product lifecycle. Revision Control Any modification to this specification shall be processed through the formal engineering change management system. All revisions shall undergo technical review, validation, and approval before release to ensure continued compliance with design intent and applicable engineering standards. #EngineeringSpecification #Photomicrosensor #OpticalSensor #SlotSensor #IndustrialAutomation #EmbeddedSystems #Optoelectronics #QualityAssurance #EngineeringDocumentation #ElectronicComponents