Temperature Sensor Digital, Local 0°C ~ 70°C 16 b 10-LGA (2x2) Digital temperature sensor designed for high-accuracy body temperature measurement with a ±0.1°C accuracy (from +30°C to +50°C). It operates from a 1.7 V to 3.6 V supply, communicates through an I²C-compatible interface, provides a 16-bit temperature output with 0.005°C resolution, and includes programmable high/low temperature alarms with an interrupt output. #TemperatureSensor #DigitalSensor #BodyTemperature #I2C #LowPower #AnalogDevices

Battery Battery Monitor IC Lithium Ion 8-WLP (1.66x0.92) Battery fuel gauge IC that provides ModelGauge™ state-of-charge estimation for single-cell lithium-ion batteries without requiring a current-sense resistor. It operates over a 2.5 V to 4.5 V supply range, communicates through an I²C interface, measures battery voltage, and reports state of charge and voltage while consuming a typical operating current of 23 µA and a 0.3 µA shutdown current. #BatteryFuelGauge #FuelGaugeIC #BatteryManagement #SingleCellLiIon #ModelGauge #I2C #AnalogDevices #MaximIntegrated #PowerManagement #VoltageMonitoring

NTSC/PAL Video Decoder IC – Low-power high-performance multistandard video decoder for converting analog composite video into digital YCbCr video. Supports all NTSC and PAL standards, operates from a 1.8 V analog and digital supply with 1.7 V to 3.45 V digital I/O, and features a 10-bit 54 Msps ADC with 4× oversampling. Includes a 2:1 composite video input multiplexer, adaptive comb filter, automatic gain control (AGC), automatic standard detection, line-locked PLL, and 8-bit or 10-bit ITU-R BT.656 parallel video output. Typical power consumption is 200 mW, with <100 µW shutdown power and <5 mW sleep mode. Specified for operation over a −40°C to +125°C automotive temperature range and housed in a 28-pin QSOP package. Not recommended for new designs (NRND). #AnalogDevices #MaximIntegrated #MAX9526AEI #MAX9526 #VideoDecoder #NTSC #PAL #CompositeVideo #ITU656 #ADC #Automotive #QSOP28 #EmbeddedSystems

This ADP2302-based design is a step-down voltage regulator, converting a higher input voltage to a stable 5V output. Ideal for applications requiring a regulated 5V supply. #referenceDesign #Module #Sublayout #stepDown #voltageRegulator #5V #ADP2302 #ADP2302ARDZ #reusable #module #powermanagement #analogdevices #sublayout

This is a module of buck converter based on LTC3388 with output voltage 3.3V/5V #dcdc #power #ad #3V3 #reusable #module #powermanagement #analogdevices #sublayout

RF IC Synthesizer, VCO VSAT 7.3GHz ~ 14.6GHz SPI Interface 48-LGA (7x7) The ADF5611 allows implementation of fractional-N or integer-N phase-locked loop (PLL) frequency synthesizers when used with an external loop filter and an external reference source. The wideband microwave voltage controlled oscillator (VCO) design permits frequency operation from 7300MHz to 14,600MHz at a single RF output. A series of frequency dividers with a differential frequency output allows operation from 57MHz to 14,600MHz. Analog and digital power supplies for the PLL circuitry range from 3.15V to 3.45V, and the VCO supplies are between 4.75V and 5.25V. The ADF5611 has an integrated VCO with a fundamental frequency of 3650MHz to 7300MHz. These frequencies are internally doubled and routed to the RFOUT pin. An additional differential output allows the doubled VCO frequency to be divided by 1, 2, 4, 8, 16, 32, 64, or 128, allowing the user to generate RF output frequencies as low as 57MHz. A simple 3- or 4-wire serial port interface (SPI) provides control of all on-chip registers. To conserve power, this divider block can be disabled when not needed through the SPI. Likewise, the output power for both the single-ended output and the differential output are programmable. The integrated phase detector and Δ-Σ modulator, capable of operating at up to 100MHz, permit wide loop bandwidths and fast frequency tuning with a typical spurious level of −105dBc. With a VCO open-loop phase noise at an 100kHz offset from −115dBc/Hz at a 7.3GHz RFOUT to −109dBc/Hz at a 14.6GHz RFOUT, the ADF5611 is equipped to minimize blocker effects and to improve receiver sensitivity and transmitter spectral purity. The low phase noise floor eliminates any contribution to modulator and mixer noise floor in transmitter applications. ► RFOUT frequency range: 7300MHz to 14,600MHz ► PDIV_OUT and NDIV_OUT frequency range: 57MHz to 14,600MHz ► Fractional-N synthesizer and integer-N synthesizer modes ► Typical PFD spurious: <−105dBc ► Integrated RMS jitter at 1kHz to 100MHz integration bandwidth: <40fs ► Normalized inband phase noise floor FOM ► Integer mode: −232dBc/Hz ► Fractional mode: −229dBc/Hz ► Maintains frequency lock over −40°C to +85°C (lock and leave) ► Low phase noise VCO ► −115dBc/Hz typical at 100kHz (7.3GHz) ► −114dBc/Hz typical at 100kHz (10GHz) ► −109dBc/Hz typical at 100kHz (14.6GHz) ► RFOUT power (typical): 6dBm ► Programmable divide by 1, 2, 4, 8, 16, 32, 64, or 128 output ► Programmable output power level ► Typical power dissipation: 1W ► 48-terminal, 7 mm × 7 mm LGA package: 49 mm2 #ADF5611BCCZ #ADF5611 #FrequencySynthesizer #PLL #MicrowaveSynthesizer #RFIC #LowPhaseNoise #VCO #WirelessInfrastructure #SatelliteCommunication #MicrowaveRadio #TestAndMeasurement #AnalogDevices #RFDesign #ClockGeneration

This is a module of boost converter based on LT3489 with 12V out and 3.3V/5V in #boost #12V #5V #3V3 #reusable #module #powermanagement #analogdevices #sublayout

This is a module of a buck converter based on LT8606 with 3.3V 0.35A output #dcdc #power #3V3 #reusable #module #powermanagement #analogdevices #sublayout

This is a boost module based on LT8410, with output voltage 16V and input 2.5-16V #dcdc #boost #power #16V #reusable #module #powermanagement #analogdevices #sublayout

This is a step-up converter module based on ADP1618 with 5V input and 12V output #dcdc #5V #12V #power #reusable #module #powermanagement #analogdevices #sublayout

This is a buck module based on LT1933 with an internal 0.75A power switch and 3.3V output #3V3 #dcdc #power #reusable #module #powermanagement #analogdevices #sublayout

This is a module of dc-dc converter based on LTC3221 with 3.3V out and 1.8-4V in #power #dcdc #3V3 #reusable #module #powermanagement #analogdevices #sublayout

This is a boost module based on LTC3426 with 3.3V 0.8A output #dcdc #boost #3V3 #power #reusable #module #sublayout #powermanagement #analogdevices

This is a boost module based on ADP1607 with an output voltage of 3.3V/1.8V #dcdc #power #3V3 #1V8 #reusable #module #powermanagement #analogdevices #sublayout

This is a module of buck converter based on ADP2108 with output voltage 3.3V #dcdc #power #ad #3V3 #reusable #module #powermanagement #analogdevices #sublayout

This is a module of MAX3050 with a standard configuration for normal mode #MAX3050 #can #interface #reusable #module #canbus #analogdevices #transceiverCircuit #sublayout

This is a module of LT3970 Adjustable, efficient buck regulator. 40V input, 2.5µA quiescent current #dcdc #power #AD #reusable #module #powermanagement #analogdevices #sublayout

This is a module of MAX13052 with a standard configuration for normal mode #MAX13052 #can #reusable #module #canbus #analogdevices #sublayout

This is a module of LTC2875IS8#TRPBF with a standard configuration for normal mode #LTC2875IS8#TRPBF #can #interface#reusable #module #canbus #analogdevices #sublayout

This is a module of MAX33041EASA+ with a standard configuration for normal mode #MAX33041EASA #can #interface #reusable #module #canbus #analogdevices #sublayout

8-Channel, software selectable input range ±10 V, ±5V, ±2.5V, 0 V to +10 V, true bipolar input, 12-Bit plus sign, 1 MSPS SAR ADC, TSSOP-24 Analog-Devices ADC bipolar 12-Bit SPI TSSOP*4.4x7.8mm*P0.65mm*