I2C Isolator, 2.5 kVrms, Unidirectional Clock, Bidirectional data, SOIC-8 digital isolator i2c SOIC*3.9x4.9mm*P1.27mm*

4-Bit Unidirectional Voltage-Level Translator – Four-channel fixed-direction voltage-level translator for logic-level shifting between mixed-voltage digital interfaces. Operates with independent VCCA and VCCB supplies from 1.08 V to 5.5 V, supports data rates up to 200 Mbps, and features Schmitt-trigger inputs for improved noise immunity. Provides 3-state outputs (OE control), push-pull output drivers, partial power-down support (Ioff), and is 5.5 V tolerant on the I/O side when powered appropriately. Specified for operation over a −40°C to +125°C temperature range and housed in a 14-pin TSSOP package. #TexasInstruments #TXU0304 #TXU0304PWR #LevelTranslator #VoltageTranslator #LogicLevelShifter #4BitTranslator #SchmittTrigger #TriStateOutput #DigitalLogic #TSSOP14 #EmbeddedSystems

The Seeed Studio RS-485 Breakout Board is a versatile RS-485 expansion designed for all Seeed Studio XIAO development boards. Equipped with the TP8485E transceiver IC, this breakout board efficiently converts UART serial streams to RS-485 signals. Operating as a half-duplex transceiver, the TP8485E enables unidirectional communication, spanning distances of up to 1200 meters. This breakout board is engineered for efficiency, consuming power from a single 5V or 12VDC power source. Its RS-485 output is facilitated through 3-pin terminals for both signal wires and power connections. These features collectively make it an ideal choice for robust data transmission across extensive distances and in challenging, high-noise environments.

1500W unidirectional TVS diode, DO-201AE transient voltage suppressor TRANSZORB® D?DO?201AE*

Low capacitance unidirectional quadruple ESD protection diode array, 3.3V, Common Anode, SOT-665 diode SOT?665*

80V Zero Drift, Unidirectional, Current Shunt Monitor, 60V/V gain, bandwidth 500kHz, Vcc=4V~80V, MSOP-8 highside HS current sense amplifier linear buffered monitor MSOP*3x3mm*P0.65mm*

Low capacitance unidirectional fivefold ESD protection diode array, 3.3V, Common Anode, SOT-666 diode SOT?666*

14VC Clamp 2.5A@8/20us Ipp TVS DIODE USON-10(1x2.5) The TPDxE05U06 is a family of unidirectional Transient Voltage Suppressor (TVS) based Electrostatic Discharge (ESD) protection diodes with ultra-low capacitance. Each device can dissipate ESD strikes above the maximum level specified by the IEC 61000-4-2 international standard. The TPDxE05U06s ultra-low loading capacitance makes it ideal for protecting any high-speed signal pins. Typical applications for TPDxE05U06 includes high speed signal lines in HDMI 1.4b, HDMI 2.0, USB 3.0, MHL, LVDS, DisplayPort, PCI-Express® , eSata, and V-by-One® HS. Features • IEC 61000-4-2 Level 4 ESD Protection – ±12-kV Contact Discharge – ±15-kV Air Gap Discharge • IEC 61000-4-4 EFT Protection – 80 A (5/50 ns) • IEC 61000-4-5 Surge Protection – 2.5 A (8/20 µs) • IO Capacitance 0.42 pF to 0.5 pF (Typical) • DC Breakdown Voltage 6.5 V (Minimum) • Ultra low Leakage Current 10 nA (Maximum) • Low ESD Clamping Voltage • Industrial Temperature Range: –40°C to +125°C • Easy Straight-Through Routing Packages Application • HDMI 1.4b • HDMI 2.0 • USB 3.0 • MHL • LVDS Interfaces • DisplayPort • PCI-Express® • eSata Interfaces • V-by-One® HS #Commonpartlibrary #TVS diode #Circuit Protection

JEU0524P is a unidirectional TVS diode array in DFN2510-10L package, designed for ESD protection with 5V reverse working voltage, 6.0 to 9.0V breakdown voltage, ultra low capacitance of 0.5pF typical, and peak pulse power of 100W at 8/20μs waveform.TVS SEU0524PC DFN2510-10_L2.5-W1.0-P0.50-BL LCSC Part Number: C964550 JLCPCB Part Class: Extended Part Manufactured by SALLTECH(萨瑞)

3.3A 20V 70W 6V Unidirectional 5V DFN1006-2 ESD and Surge Protection (TVS/ESD) ROHS ESD5341N is a single-line, unidirectional Transient Voltage Suppressor (TVS) diode designed to protect high-speed data and signal lines from Electrostatic Discharge (ESD), Electrical Fast Transients (EFT), and surge events. Its ultra-low capacitance makes it suitable for protecting sensitive interfaces without degrading signal integrity. Key Features Working (stand-off) voltage: 5 V ESD protection: Up to ±20 kV contact discharge per IEC 61000-4-2 Surge capability: Up to 4 A (8/20 μs) per IEC 61000-4-5 Ultra-low capacitance: Typically 1.0 pF, minimizing signal distortion Ultra-low leakage current: Typically <1 nA Low clamping voltage for effective transient suppression Unidirectional protection for a single signal line Compact DFN1006-2L package Pb-free and Halogen-free compliant versions available Typical Applications USB interfaces HDMI interfaces DVI ports Portable electronics Notebooks and handheld devices Other high-speed data lines requiring ESD protection #CommonPartsLibrary #Diode

9.2VC Clamp 21.8A Ipp TVS DIODE SOD-123FL The SMF5.0A is a unidirectional Transient Voltage Suppressor (TVS) diode designed to protect sensitive electronic circuits from electrostatic discharge (ESD), lightning surges, and other transient overvoltage events. It is commonly used on 5V power rails, USB VBUS lines, DC inputs, and general-purpose power protection applications. The device comes in a compact surface-mount SOD-123FL/SMF package suitable for space-constrained PCB designs. Key Features 5V reverse standoff voltage (VRWM) 200W peak pulse power dissipation (10/1000µs waveform) Fast response time for transient suppression Low clamping voltage (~9.2V max) Unidirectional TVS protection Excellent ESD and surge protection capability Compact SOD-123FL / SMF surface-mount package Low leakage current Operating temperature up to +150°C RoHS compliant and halogen-free variants available

23.2VC Clamp 25.9A@10/1000us Ipp TVS DIODE SMB(DO-214AA) The SMBJ14A-HF is a unidirectional Transient Voltage Suppressor (TVS) diode designed to protect sensitive electronic circuits from high-voltage transient events such as ESD (electrostatic discharge), lightning-induced surges, and switching spikes. It is part of the SMBJ series, commonly used for general-purpose surge protection in compact surface-mount designs. It is housed in a DO-214AA (SMB) surface-mount package, making it suitable for automated PCB assembly and space-constrained applications. Key Features Working reverse standoff voltage (VRWM): 14 V Breakdown voltage: ~15.6 V to 17.2 V Clamping voltage: ~23.2 V at peak pulse current Peak pulse power: 600 W (10/1000 µs waveform) Peak pulse current: ~25.9 A Unidirectional TVS diode (single channel) Fast response to transient overvoltage events (nanosecond range) Low leakage current (typically ~1 µA) Operating temperature range: −55 °C to +150 °C Surface-mount DO-214AA (SMB) package RoHS compliant, HF (halogen-free) version (“-HF”) #CommonPartsLibrary #Diode

On_Semiconductor-SESD7L5.0DT5G-* http://www.onsemi.cn/pub_link/Collateral/ESD7L-D.PDF Manufacturer URL http://www.onsemi.com/ Package Specification http://www.onsemi.com/pub_link/Collateral/631AA.PDF Rev. 6 Unidirectional 1 Surface Mount 2 9aefdc1a32a7e8ea On Semiconductor SOT-723-3-631AA-01 1407151489 No 162CA014-78EF-4C16-B7A6-A0170DDC4E36 yes

53.3V Clamp 7.5A Ipp Tvs Diode Surface Mount SMA TVS diode SMA 33V The SMAJ33A-13-F is a surface-mount transient voltage suppression (TVS) diode designed to protect sensitive electronic components from voltage spikes and transient events. It is typically used in circuits exposed to electrostatic discharge, inductive load switching, and other transient voltage conditions. The device operates by clamping excessive voltage to a safe level, thereby preventing damage to downstream components. Its compact surface-mount package enables efficient use of board space while maintaining reliable thermal and electrical performance. Device Overview This component is constructed using silicon avalanche technology, providing fast response time to transient events. It is intended for use in high-reliability applications where overvoltage protection is critical. The unidirectional configuration ensures effective suppression in circuits with a defined polarity. The device is optimized for low leakage current under normal operating conditions and high surge capability during transient events. Electrical Characteristics The diode is designed to operate with a defined stand-off voltage, ensuring it remains non-conductive during normal system operation. Upon exceeding the breakdown threshold, the device transitions into conduction, clamping the voltage to a specified level. It supports high peak pulse power dissipation and is capable of handling repeated transient events without significant degradation. Mechanical and Packaging Information The device is provided in a compact surface-mount package suitable for automated assembly processes. The package is designed for efficient heat dissipation and mechanical robustness, supporting standard reflow soldering techniques. Terminal finishes are compatible with common PCB manufacturing processes and ensure reliable solder joints. Applications Suitable for use in consumer electronics, industrial control systems, telecommunications equipment, and automotive electronics where protection against voltage transients is required. Common use cases include power supply lines, data lines, and interface ports. Environmental and Reliability Considerations The component is designed to meet standard environmental and reliability requirements for electronic components. It is suitable for operation across a wide temperature range and is built to withstand typical handling and assembly stresses. #commonpartslibrary #circuitprotection #tvsdiode

TVS SMBJ12A-HRA SMB_L4.3-W3.6-LS5.4-R-RD LCSC Part Number: C1977456 JLCPCB Part Class: Extended Part Manufactured by Littelfuse(美国力特) Description: SMBJ-HRA Series high-reliability transient voltage suppressor (TVS) diode, surface-mount surge protection device designed to protect sensitive electronic circuits from lightning-induced and other transient overvoltage events. 600W peak pulse power capability (10/1000µs waveform), low clamping voltage, fast response time (<1ps), low leakage current (<1µA above 12V), IEC 61000-4-2 ESD protection, IEC 61000-4-4 EFT protection, operating temperature range -65°C to +150°C, SMB package, suitable for power, data, communication and industrial protection applications. Search Keywords: SMBJ-HRA, SMBJ HRA, High Reliability TVS Diode, SMB TVS Diode, 600W TVS, Transient Voltage Suppressor, Surge Protection Diode, Unidirectional TVS, Bidirectional TVS, IEC61000-4-2 TVS, IEC61000-4-4 TVS, Lightning Protection Diode, SMB Package TVS, High Reliability Protection Diode Hashtags: #SMBJHRA #TVSDiode #TransientVoltageSuppressor #SurgeProtection #SMBPackage #600WTVS #ESDProtection #EFTProtection #LightningProtection #UnidirectionalTVS #BidirectionalTVS #HighReliabilityTVS #CircuitProtection #OvervoltageProtection #SMBJSeries

TVS Diode for transient voltage protection in electronic circuits. Unidirectional device with a stand-off voltage (VRWM) of 85 V, breakdown voltage of 94.4 V to 104.4 V, maximum clamping voltage of 137 V at a peak pulse current of 10.9 A, and 1500 W peak pulse power dissipation (10/1000 µs waveform). Packaged in SMC (DO-214AB) and designed for protection against transient overvoltage events. #TVSDiode #TransientVoltageSuppressor #Unidirectional #85V #1500W #SMC #DO214AB #CircuitProtection #MDD #SMCJ85A