Connector Header Through Hole, Right Angle 6 position 0.118" (3.00mm) The Molex 0430450623 is a 6-position, dual-row, right-angle through-hole header with a 3.00 mm pitch, part of the Micro-Fit 3.0 (43045 series) connector family. It is commonly used for compact, high-reliability power and signal connections in industrial, automotive, and electronic systems. Key Features Series: Molex Micro-Fit 3.0 (43045) Number of positions: 6 pins (2 rows) Pitch: 3.00 mm (0.118") Mounting type: Through-hole, right-angle PCB mount Contact type: Male pin header Current rating: up to ~8 A (depending on wire gauge) Voltage rating: 600 V Contact material: Brass Contact finish: Gold (mating side), Tin (tail side) Locking mechanism: Latch / ramp for secure mating Operating temperature: -40°C to +105°C Flammability rating: UL94 V-0 housing material Housing material: Glass-filled LCP (Liquid Crystal Polymer) Board retention: PCB lock / press-fit retention feature Typical Applications Automotive electronics Industrial control systems Power distribution modules Consumer appliances Telecommunications equipment Medical devices #CommonPartsLibrary #Connector #Molex #MicroFit3_0 #0430450623 #Connector #RightAngleHeader #3mmPitch #WireToBoard #PowerConnector #PCBHeader

Buck Switching Regulator IC Positive Adjustable 2.5V 1 Output 1A 14-PowerTSSOP (0.173", 4.40mm Width) The LM5010 step-down switching regulator features all the functions needed to implement a low-cost, efficient, buck bias regulator capable of supplying in excess of 1-A load current. This high-voltage regulator contains an N-Channel Buck Switch, and is available in thermally enhanced 10-pin WSON and 14-pin HTSSOP packages. The hysteretic regulation scheme requires no loop compensation, resulting in fast load transient response, and simplifies circuit implementation. The operating frequency remains constant with line and load variations due to the inverse relationship between the input voltage and the ON-time. The valley current limit detection is set at 1.25 A. Additional features include: VCC undervoltage lockout, thermal shutdown, gate drive undervoltage lockout, and maximum duty cycle limiter Features 1• Input Voltage Range: 8 V to 75 V • Valley Current Limit At 1.25 A • Switching Frequency Can Exceed 1 MHz • Integrated N-Channel Buck Switch • Integrated Start-Up Regulator • No Loop Compensation Required • Ultra-Fast Transient Response • Operating Frequency Remains Constant With Load and Line Variations • Maximum Duty Cycle Limited During Start-Up • Adjustable Output Voltage • Precision 2.5-V Feedback Reference • Thermal Shutdown • Exposed Thermal Pad for Improved Heat Dissipation 2 Applications • High Efficiency Point-of-Load (POL) Regulator • Non-Isolated Telecommunications Buck Regulator • Secondary High Voltage Post Regulator • Automotive Systems #TexasInstruments #LM5010MHXNOPB #BuckRegulator #DCDCConverter #SwitchingRegulator #PowerManagement #HighVoltage #StepDownConverter #IndustrialElectronics #EmbeddedSystems #PowerSupplyDesign #HTSSOP14 #PMIC #ElectronicsDesign #VoltageRegulator

Telecommunications Switch IC 1 Channel 16-MLP (3x3) #commonpartslibrary #integratedcircuit #telecommunication

Buck Switching Regulator IC Positive Adjustable 0.8V 1 Output 3.5A SOT-23-6 Thin, TSOT-23-6 The LMR51635YFDDCR specification defines the engineering requirements for a synchronous step-down DC-DC converter integrated circuit designed for high-efficiency power regulation in embedded and industrial electronic systems. This specification establishes the functional, electrical, mechanical, thermal, environmental, and quality requirements necessary to ensure stable voltage conversion, efficient power management, and long-term operational reliability. The device is intended for use in industrial automation, telecommunications equipment, consumer electronics, test and measurement instruments, distributed power systems, and embedded applications requiring regulated low-voltage power rails from higher-voltage DC sources. It integrates high-performance switching circuitry to provide efficient voltage conversion while minimizing external component count and overall system power loss. Engineering Requirements The DC-DC converter shall be manufactured using qualified semiconductor fabrication processes and high-quality materials to ensure consistent electrical performance, low power consumption, and reliable long-term operation. The device shall maintain stable functionality under specified input voltage, output load, temperature, and environmental operating conditions. Electrical characteristics shall provide accurate output voltage regulation, high conversion efficiency, low output ripple, and fast transient response during load and input voltage variations. The converter shall maintain stable switching operation while supporting continuous and dynamic power delivery with minimal performance degradation. The integrated control architecture shall ensure reliable startup, controlled shutdown, and stable operation under varying load conditions. Built-in protection mechanisms shall support safe operation during abnormal conditions, including overload, overcurrent, thermal stress, and short-circuit events, thereby enhancing overall system reliability. Thermal performance shall support continuous operation within the specified junction temperature range while maintaining electrical integrity and long-term reliability. The package shall be suitable for automated surface-mount assembly and compatible with standard solder reflow manufacturing processes. Mechanical construction shall withstand thermal cycling, vibration, mechanical handling, and environmental exposure without degradation of electrical or mechanical performance. Workmanship shall be free from defects including contamination, package cracking, bond failures, lead deformation, or structural inconsistencies that could adversely affect device functionality or reliability. Inspection, validation, and testing shall be conducted using calibrated equipment and controlled quality procedures to verify compliance with engineering and manufacturing requirements. Any deviation from this specification shall require formal engineering evaluation, documented technical justification, and approval through the established engineering change control process before implementation. Documentation Supporting documentation shall include engineering drawings, electrical performance specifications, application guidelines, thermal characterization reports, qualification records, inspection reports, reliability data, material declarations, and revision-controlled manufacturing documentation. All documentation shall be maintained under formal configuration management and quality assurance systems to ensure complete product traceability. Revision Control Any modification to this specification shall be managed through the formal engineering change management process. All revisions shall undergo technical review, validation, and approval before release to ensure continued compliance with design intent and applicable engineering standards. #EngineeringSpecification #DCDCConverter #BuckConverter #PowerManagement #PowerElectronics #EmbeddedSystems #IndustrialElectronics #VoltageRegulator #QualityAssurance #EngineeringDocumentation

USB, Telecommunications Switch IC 1 Channel 42-WQFN (3.5x9) #commonpartsLibrary #integratedcircuit #analog

Buck Switching Regulator IC Positive Fixed 3.3V 1 Output 2A 8-SOIC (0.154", 3.90mm Width) # L6982N33DR ## General Description The L6982N33DR is a high-efficiency synchronous step-down switching regulator manufactured by STMicroelectronics. It is designed to provide a fixed regulated output voltage from a wide input voltage range while maintaining excellent conversion efficiency and low power dissipation. The device integrates high-side and low-side power MOSFETs, control circuitry, protection features, and compensation functions within a compact package, reducing external component count and simplifying power supply design. Its robust architecture makes it suitable for industrial automation systems, distributed power architectures, telecommunications equipment, embedded systems, consumer electronics, smart devices, and battery-powered applications requiring efficient DC-to-DC voltage conversion. ## Key Features ### Power Conversion Architecture * Synchronous buck regulator topology * Fixed output voltage regulation * Integrated power MOSFETs * High-efficiency power conversion * Optimized switching performance * Reduced external component requirements ### Electrical Characteristics * Wide input voltage operating range * Stable output voltage regulation * High conversion efficiency * Low standby power consumption * Fast transient response * Low output ripple performance ### Control Features * Current-mode control architecture * Internal compensation circuitry * Soft-start functionality * Frequency synchronization capability * Stable operation under varying load conditions ### Protection Features * Overcurrent protection * Short-circuit protection * Thermal shutdown protection * Undervoltage lockout protection * Safe startup operation * Enhanced system reliability ### Power Management * Low-power operating modes * Energy-efficient design * Suitable for battery-powered systems * Optimized thermal performance * Reduced power dissipation ### Package Characteristics * Surface-mount package * Compact footprint * Automated assembly compatible * High-density PCB design support * Industrial-grade packaging ### Material Construction * Monolithic integrated power management solution * Lead-free package materials * RoHS-compliant construction * High-reliability semiconductor technology ### Environmental Characteristics * Suitable for industrial operating environments * Long operational service life * Reliable continuous operation * Robust thermal performance ### Application Areas * Industrial Automation Equipment * Embedded Systems * Microcontroller Power Supplies * FPGA and Processor Power Rails * Telecommunications Equipment * Smart Metering Systems * Consumer Electronics * Building Automation Systems * Distributed Power Architectures * Battery-Powered Devices * IoT Products * Power Management Modules ### Compliance * RoHS Compliant * Lead-Free Compatible * Industrial-Grade Power Management Solution ## Manufacturer STMicroelectronics ## Product Family L6982 Synchronous Step-Down Switching Regulator Series #L6982N33DR #STMicroelectronics #BuckConverter #DCtoDCConverter #SwitchingRegulator #PowerManagement #PowerSupplyDesign #EmbeddedSystems #IndustrialElectronics #VoltageRegulator #PowerElectronics #IoTDevices #ElectronicsEngineering #PCBDesign #SMPS

1 µF ±10% 16V Ceramic Capacitor X7R 0603 (1608 Metric) The CGA3E1X7R1C105K080AC is a multilayer ceramic chip capacitor designed for high-reliability electronic applications requiring stable capacitance characteristics, compact form factor, and dependable performance under varying operating conditions. The component utilizes advanced ceramic dielectric technology to provide consistent electrical behavior with low losses and high insulation resistance suitable for signal filtering, decoupling, bypassing, and general-purpose circuit stabilization. The capacitor is constructed with a multilayer monolithic structure that enables high capacitance density while maintaining excellent mechanical integrity and thermal stability. Its surface-mount configuration supports automated assembly processes and high-density printed circuit board layouts commonly used in industrial, automotive, telecommunications, and consumer electronic systems. The dielectric system is engineered to maintain capacitance stability across a broad temperature range and varying electrical conditions while minimizing impedance and noise within electronic circuits. The component exhibits reliable frequency response characteristics and supports efficient suppression of voltage fluctuations and electromagnetic interference in high-speed and high-frequency applications. External terminations are designed to provide strong solderability, mechanical durability, and resistance to thermal cycling stresses during assembly and operation. The component is compatible with standard reflow soldering processes and is intended for long-term operation in environments subject to temperature variation, vibration, and electrical loading. The CGA3E1X7R1C105K080AC is suitable for use in power management circuits, communication equipment, embedded control systems, automotive electronics, and other applications requiring compact passive components with stable electrical performance and high reliability. #CommonPartsLibrary #CeramicCapacitors

Connector Header Through Hole 10 position 0.100" (2.54mm) 104128-1 is a 10-position, dual-row, vertical through-hole PCB header from the AMP-LATCH series by TE Connectivity. It is designed for reliable board-to-board and ribbon cable interconnections in signal applications. The connector features a low-profile, shrouded housing with an integrated ejection latch and polarization to ensure secure mating and prevent incorrect insertion. It is commonly used in industrial equipment, embedded systems, instrumentation, telecommunications, and computer peripherals where dependable IDC ribbon cable connections are required. 10-position, 2-row connector 2.54 mm (0.100 in) pitch Vertical through-hole PCB mounting Low-profile shrouded header Integrated ejection latch for secure cable retention Polarized design to prevent mismating Gold-plated mating contacts for reliable signal transmission Tin-lead solder tails for through-hole soldering Maximum current rating: 1 A per contact Operating temperature: -65°C to +105°C UL 94V-0 flame-retardant nylon housing Suitable for board-to-board and ribbon cable signal applications #TEConnectivity #AMPLATCH #RibbonCableConnector #PCBHeader #ThroughHole #BoardToBoard #IDCConnector #VerticalHeader #SignalConnector #EmbeddedSystems #IndustrialElectronics #ElectronicComponents

Isolated Module DC DC Converter 2 Output 12 ~ 15V -12 ~ -15V 125mA, 125mA 18V - 36V Input The CC3-2412DF-E is an isolated DC-DC converter module designed to provide efficient and reliable power conversion in industrial, telecommunications, instrumentation, and embedded electronic systems. The module converts a regulated DC input voltage into isolated dual-output DC supplies while maintaining electrical isolation between the input and output stages. Its compact encapsulated design simplifies PCB integration and enhances system reliability by reducing the need for external conversion circuitry. The device is optimized for applications requiring isolated power rails, noise reduction, and protection against ground loop interference. Engineering Specifications Manufacturer: TDK-Lambda Part Number: CC3-2412DF-E Device Type: Isolated DC-DC Converter Module Conversion Topology: Isolated Power Conversion Input Voltage: Nominal DC Input Operation Output Configuration: Dual Output Output Regulation: Regulated DC Output Isolation Type: Galvanic Isolation Efficiency: High-Efficiency Power Conversion Protection Features: Short Circuit Protection and Overload Tolerance Package Type: Encapsulated Through-Hole Module Mounting Style: Through-Hole Operating Temperature Range: Industrial Grade Reliability: Designed for Continuous Operation RoHS Compliant: Yes Applications: Industrial Automation, Telecommunications Equipment, Embedded Systems, Instrumentation, Data Acquisition Systems, Process Control Equipment, Power Distribution Circuits, Isolated Interface Designs Key Features Isolated input-to-output power conversion Dual regulated output architecture Compact PCB-mount package High efficiency operation Reduced electrical noise and ground loop interference Reliable performance in industrial environments Simplified power supply design integration Robust protection against abnormal operating conditions Suitable for mixed-signal and sensitive analog systems Long operational lifespan and stable output characteristics #CC32412DFE #TDKLambda #DCDCConverter #IsolatedPowerSupply #PowerModule #PowerElectronics #EmbeddedSystems #IndustrialElectronics #PowerConversion #GalvanicIsolation #Telecommunications #Instrumentation #AutomationSystems #PCBDesign #ElectronicComponents #DualOutput #PowerManagement #IndustrialAutomation #ElectricalEngineering #PowerSupplyDesign

Headers & Wire Housings PICOFLEX 10P HDR LOPRO SN Connector Header Through Hole 10 position 0.050" (1.27mm) The 0903250010 is a 10-position vertical through-hole header connector from the Picoflex PF-50 series by Molex. It features a 1.27 mm pitch, straight orientation, and is designed for reliable board-to-cable interconnections in compact electronic equipment. The connector is commonly used with Picoflex ribbon cable assemblies in industrial, consumer, telecommunications, and embedded electronic applications. It provides a space-saving solution while maintaining dependable electrical and mechanical performance. Key Features 10 contacts (single-row configuration) 1.27 mm (0.050") contact pitch Vertical (straight) through-hole mounting Male header design Compatible with Molex Picoflex cable connectors Current rating up to 1.2 A per contact Voltage rating up to 250 V Operating temperature range: -40°C to +105°C Low contact resistance (15 mΩ max) High insulation resistance (1000 MΩ min) RoHS compliant Compact footprint for high-density PCB designs Suitable for signal and low-power applications #CommonPartsLibrary #0903250010 #Molex #Picoflex #Connector #HeaderConnector #ThroughHole #PCBConnector #BoardToCable #Interconnect #Electronics #EmbeddedSystems #IndustrialElectronics #RibbonCable #1_27mmPitch #ElectronicComponents

Recom REM30-W 30W Isolated DC-DC Converter Through Hole, Voltage in 9 36 V dc, Voltage out 5V dc Medical Isolated Module DC DC Converter 1 Output 5V 6A 9V - 36V Input REM30-2405SW is a 30W isolated DC-DC converter from RECOM's REM30-W medical-grade series. It converts a 9V to 36V DC input into a regulated 5V DC output with up to 6A of output current. Designed for medical, industrial, and embedded applications, it features 5kVAC reinforced isolation, high efficiency, and comprehensive protection functions, making it suitable for powering sensitive electronic systems in demanding environments. Key Features 30W isolated DC-DC converter Wide 9V to 36V DC (4:1) input voltage range Regulated 5V DC output at up to 6A 5kVAC reinforced isolation for enhanced safety High efficiency of up to 88% Medical-grade design with low leakage current Built-in overcurrent (OCP), overvoltage (OVP), overtemperature (OTP), short-circuit (SCP), and undervoltage lockout (UVLO) protection Through-hole 2" × 1" DIP module package Wide operating temperature range of -40°C to +105°C (with derating) Suitable for medical equipment, industrial automation, instrumentation, telecommunications, and embedded power systems. #REM30_2405SW #RECOM #DCDCConverter #IsolatedPowerModule #MedicalPower #PowerSupply #IndustrialElectronics #EmbeddedSystems #ThroughHole #Electronics

Flat, 5 mm 2 Form C, 2 A, relays Telecom Relay DPDT (2 Form C) Surface Mount The TQ2SA-L2-3V-Z is a compact surface-mount DPDT (2 Form C) telecom/signal relay from Panasonic Industry designed for low-power switching applications. It features a dual-coil latching mechanism, allowing the relay to maintain its state without continuous coil power, making it suitable for battery-powered and energy-efficient systems. This relay is commonly used in telecommunications equipment, industrial controls, measurement devices, and embedded electronic systems. Key Features DPDT (2 Form C) contact configuration 3V DC dual-coil latching relay Low power consumption: approximately 140 mW Compact SMD package: only 5.6 mm height Surface-mount gull-wing terminals Sealed construction for automatic washing compatibility High switching capability: up to 2 A Wide switching voltage range: up to 125 VAC / 220 VDC Fast operate/release time: approx. 4 ms High dielectric strength and surge resistance Wide operating temperature: −40°C to +85°C Gold-clad AgNi contacts for reliable low-level signal switching Tape-and-reel packaging (“Z” suffix) for automated assembly #CommonPartsLibrary #relay

Red 633nm LED Indication - Discrete 2.1V 2-SMD, No Lead The 599-0K10-107F is a reverse-mount surface-mount (SMD) single-color red LED manufactured by Dialight. It is designed to emit light through a cutout in the PCB, making it ideal for applications where illumination is required on the opposite side of the board while keeping the LED mounted on the component side. This compact LED provides a wide viewing angle, low power consumption, and reliable performance for status indication, backlighting, and front-panel illumination in space-constrained electronic designs. Key Features Reverse-mount SMD LED for through-PCB illumination Red emission with 632 nm dominant wavelength Typical forward voltage: 2.4 V Typical forward current: 20 mA Wide 140° viewing angle Compact package: 3.2 mm × 1.25 mm × 1.1 mm Suitable for automated SMT assembly Operating temperature range: −40°C to +85°C RoHS compliant Ideal for status indicators, keypad backlighting, front-panel indicators, and networking/telecommunications equipment. #Dialight #ReverseMountLED #SMDLED #RedLED #StatusIndicator #PCBBacklighting #FrontPanel #IndustrialElectronics #Telecommunications #EmbeddedSystems #CommonPartsLibrary #Optoelectronics #LED #SMD

The RFFC5072 is a highly integrated wideband RF frequency conversion IC that combines a fractional-N PLL synthesizer, low phase-noise VCO, and a high-linearity RF mixer in a single device. It is designed for wireless infrastructure, software-defined radio (SDR), test equipment, military communications, and broadband frequency conversion applications. The device can generate local oscillator (LO) frequencies from 85 MHz to 4.2 GHz and perform frequency conversion for RF signals up to 6 GHz while maintaining excellent phase noise and spurious performance. Features  85MHz to 4200MHz LO Frequency Range  Fractional-N Synthesizer with Very Low Spurious Levels  Typical Step Size 1.5Hz  Fully Integrated Low Phase Noise VCO and LO Buffers  Integrated Phase Noise • 0.18° rms at 1GHz • 0.50° rms at 3GHz  High Linearity RF Mixer(s)  30MHz to 6000MHz Mixer Frequency Range  Input IP3 +23dBm  Mixer Bias Adjustable for Low Power Operation  Full Duplex Mode (RFFC5071)  2.7V to 3.3V Power Supply  Low Current Consumption  3- or 4-Wire Serial Interface Applications  Wideband Radios  Distributed Antenna Systems  Diversity Receivers  Software Defined Radios  Frequency Band Shifters  Point-to-Point Radios  WiMax/LTE Infrastructure  Satellite Communications  Wideband Jammers #RFFC5072 #Qorvo #RFMixer #FrequencySynthesizer #PLL #VCO #WidebandRF #FrequencyConverter #SDR #WirelessInfrastructure #RFDesign #MicrowaveEngineering #Telecommunications #EmbeddedSystems #ElectronicsDesign #RFIC #SignalProcessing #HardwareEngineering

Differential IC Telecommunications 8-SOIC #CommonPartsLibrary #IntegratedCircuit #Linear #Amplifier #Special-Purpose-Amplifier

7.2 µH Shielded Drum Core, Wirewound Inductor 7.9 A 12.8mOhm Max Nonstandard # 7447798720 ## General Description The 7447798720 is a high-performance power inductor manufactured by Würth Elektronik as part of the WE-MAPI series. It is designed for energy storage, filtering, and power conversion applications in modern switching power supplies and DC-DC converter circuits. The component features a magnetically shielded construction that minimizes electromagnetic interference while maintaining excellent current handling capability and low power losses. Its compact surface-mount design and robust mechanical structure make it suitable for industrial automation equipment, telecommunications systems, embedded electronics, automotive-support applications, consumer devices, and high-efficiency power management systems. The inductor is optimized for use in applications requiring stable inductance, low DC resistance, and reliable performance under varying load conditions. ## Key Features ### Magnetic Characteristics * Magnetically shielded construction * Stable inductance performance * High-current handling capability * Low magnetic flux leakage * Optimized energy storage capability * Suitable for high-frequency switching applications ### Electrical Characteristics * Low DC resistance * High efficiency operation * Low core losses * Stable electrical performance * Excellent current saturation behavior * Reliable operation in power conversion circuits ### Mechanical Characteristics * Surface-mount package * Compact footprint * Robust mechanical construction * Automated assembly compatible * High-density PCB design support ### Material Construction * Metal alloy core technology * Shielded magnetic structure * High-temperature materials * RoHS-compliant construction * Lead-free compatible design ### Thermal Characteristics * Efficient heat dissipation * Stable operation under continuous load * Suitable for demanding power applications * Reliable performance across industrial operating conditions ### Environmental Characteristics * Industrial-grade reliability * Long operational service life * Resistance to mechanical stress * Suitable for harsh electronic operating environments ### Application Areas * DC-DC Converters * Switching Power Supplies * Point-of-Load Regulators * Industrial Automation Equipment * Telecommunications Systems * Embedded Electronics * Power Distribution Modules * Consumer Electronics * Energy Management Systems * Battery-Powered Devices * Motor Control Systems * Power Filtering Applications ### Compliance * RoHS Compliant * Lead-Free Compatible * Industrial-Grade Power Inductor Solution ## Manufacturer Würth Elektronik ## Product Family WE-MAPI Molded Power Inductor Series #7447798720 #WurthElektronik #WEMAPI #PowerInductor #ShieldedInductor #SMDInductor #PowerElectronics #DCDCConverter #SwitchingPowerSupply #EmbeddedSystems #IndustrialElectronics #PowerManagement #PCBDesign #ElectronicsEngineering #EnergyStorage

Interface - Telecommunications VSC7440XMT CABGA-324_L19.0-W19.0-R18-C18-P1.00-TL LCSC Part Number: C1522156 undefined Manufactured by MICROCHIP(美国微芯)

Interface - Telecommunications 82P5088BBG PBGA-256_L17.0-W17.0-R16-C16-P1.00-TL LCSC Part Number: C1549182 undefined Manufactured by RENESAS(瑞萨)/IDT

Isolated DC-DC Converter Module – 3 W regulated isolated DC-DC converter for industrial automation, instrumentation, telecommunications, process control, and embedded power applications. Accepts a 9 V to 27 V DC input (3:1 input range) and provides dual ±15 V regulated outputs at ±100 mA, delivering 3 W maximum output power. Features 3 kVDC input-to-output isolation, up to 83% efficiency, remote ON/OFF control, continuous short-circuit protection, low ripple and noise, and no minimum load requirement for reliable isolated power conversion. Designed for through-hole PCB mounting in an SIP-8 package, it operates over a −40°C to +71°C temperature range and complies with IEC/EN/UL 60950-1 safety standards and RoHS requirements. #RECOM #RS32415DZH3 #RS3Series #DCDCConverter #IsolatedPower #DualOutput #15VPowerSupply #3WConverter #IndustrialPower #EmbeddedPower #SIP8 #EmbeddedSystems