SMD,24x24mm RF Transceiver Modules and Modems RoHS A7670C-LASE is a compact LTE Cat 1 wireless communication module from SIMCom Wireless Solutions designed for IoT and M2M applications. It supports 4G LTE and 2G fallback connectivity, providing reliable cellular data communication for industrial, automotive, security, POS, and remote monitoring systems. The module uses a compact 24 mm × 24 mm LGA+LCC package, making it suitable for space-constrained designs. Key Features LTE Cat 1 cellular module with up to 10 Mbps downlink and 5 Mbps uplink data rates. Supports LTE-FDD, LTE-TDD, GSM, GPRS, and EDGE networks. Compact 24 mm × 24 mm LGA+LCC package for easy migration from 2G, NB-IoT, and Cat-M designs. Operating voltage range of 3.4 V to 4.2 V. Multiple interfaces including: USB 2.0 UART I²C SPI GPIO ADC Integrated TCP/IP protocol stack for internet connectivity. Supports major operating systems including Windows, Linux, and Android through USB drivers. Firmware Over-The-Air update (FOTA/DFOTA) support. Supports LBS (Location Based Service) positioning. TLS/SSL security protocol support for secure communications. AT command compatible cellular modem architecture. Typical Applications Vehicle telematics and fleet management Industrial IoT gateways and routers POS terminals Security and surveillance systems Remote monitoring and telemetry Healthcare and telemedicine devices

Cellular, Navigation BeiDou, EGDE, Galileo, GLONASS, GPS, GNSS, GSM, LTE Transceiver Module 850MHz, 900MHz, 1.8GHz, 1.9GHz Antenna Not Included Surface Mount The BG95M3LA-64-SGNS is a compact low-power LTE cellular communication module designed for IoT, telematics, asset tracking, industrial automation, and embedded wireless applications. The module supports global LTE Cat M1, Cat NB2, and EGPRS connectivity, enabling reliable wide-area wireless communication for battery-powered and mobile embedded systems. The device integrates cellular modem functionality, GNSS positioning capability, power management features, and multiple peripheral communication interfaces within a highly compact surface-mount package optimized for space-constrained embedded designs. The module is engineered for low-power operation, making it suitable for long-life IoT deployments requiring efficient wireless connectivity. The BG95M3LA-64-SGNS supports integrated satellite positioning technologies including GPS, GLONASS, Galileo, and BeiDou for location-aware applications. Its robust RF performance and industrial-grade operating capability allow deployment in harsh environmental conditions and demanding remote monitoring systems. The module provides comprehensive support for embedded communication protocols and is commonly used in smart meters, telematics units, industrial gateways, environmental monitoring systems, fleet tracking devices, and connected sensor platforms. Key Features LTE Cat M1 cellular communication support LTE Cat NB2 narrowband IoT capability EGPRS fallback connectivity Integrated GNSS positioning functionality Low-power optimized architecture Global wireless network compatibility Compact surface-mount module design Embedded TCP/IP protocol stack support UART, USB, and serial communication interfaces Integrated power management subsystem Industrial operating temperature support Embedded IoT connectivity optimization High-reliability wireless communication platform Multi-constellation satellite navigation support Electrical Characteristics Low operating power consumption Wide input voltage support High RF sensitivity performance Embedded low-power sleep functionality Stable wireless communication architecture Integrated RF and baseband processing Optimized antenna interface support Industrial-grade reliability performance Fast network registration capability Applications IoT and M2M communication systems Asset tracking devices Fleet management platforms Smart utility metering Industrial automation equipment Remote environmental monitoring Smart agriculture systems Telematics and transportation electronics Portable wireless data terminals Embedded gateway systems Smart city infrastructure Connected sensor platforms Package Information Package Type: LGA Module Mounting Type: Surface Mount Compact embedded wireless module package RoHS compliant configuration available #commonpartslibrary #wirelessmodule #lte #iot #embeddedhardware #cellularcommunication #gnss #telematics #industrialautomation #assettracking

Bluetooth, WiFi 802.11b/g/n, Bluetooth v4.2 +EDR, Class 1, 2 and 3 Transceiver Module 2.4GHz ~ 2.5GHz Surface Mount #RF #Module #Transceiver #Modem

Transceiver Module Surface Mount #RF #Module #Transceiver #Modem #BT121

1.2k Modem FSK, Bell 202 16-SOIC #commonpartslibrary #interface #telecom #integratedcircuit

8 Position Card Connector Micro SIM Surface Mount, Right Angle Gold ## Engineering Specification ## General Description The **693022010811** is a Würth Elektronik **WR-CRD Micro SIM card connector** designed for compact electronic devices requiring secure SIM card retention and reliable board-level electrical connection. It is intended for surface-mount printed circuit board assembly and is suitable for communication modules, wireless devices, embedded systems, IoT hardware, and networking equipment. The connector uses a hinged lid mechanism to hold the Micro SIM card in place during operation. ## Device Identification Manufacturer Part Number: **693022010811** Manufacturer: **Würth Elektronik** Product Series: **WR-CRD** Device Category: **Connector and Interconnect Component** Device Type: **Micro SIM Card Connector** Connector Style: **Hinge Type** Mounting Type: **Surface Mount, Right Angle** ## Functional Description The device functions as a board-mounted Micro SIM card interface. It provides mechanical retention and electrical contact between the SIM card and the host printed circuit board. The hinged lid design allows the SIM card to be placed into the connector and secured during operation, helping maintain contact stability in compact electronic assemblies. ## Mechanical Description The connector is designed with a low-profile surface-mount construction suitable for space-constrained PCB layouts. It uses a hinged card-retention mechanism and is intended for horizontal or right-angle card installation. The mechanical structure supports reliable insertion, retention, and removal of the Micro SIM card during normal use. ## Electrical Description The connector is intended for signal-level SIM card interface applications. It provides multiple gold-plated contact positions for stable electrical connection between the SIM card and the host circuit. The device should be used within the manufacturer’s specified voltage, current, contact resistance, and insulation limits. ## Material and Contact Description The connector uses copper alloy contacts with gold plating for reliable signal transfer and corrosion resistance. The housing and mechanical retention structure are designed for surface-mount assembly and repeated card handling within the rated operating conditions. ## Mounting and Assembly Description The component is suitable for automated surface-mount PCB assembly. Proper land pattern design, soldering profile control, and mechanical clearance should be followed according to the manufacturer’s recommended layout and assembly guidance. The PCB design should provide stable grounding, correct pad alignment, and adequate clearance for SIM card insertion and lid operation. ## Application Suitability The **693022010811** is suitable for cellular communication devices, IoT modules, wireless routers, embedded modems, tracking systems, smart meters, industrial communication equipment, portable electronics, and other products requiring a Micro SIM card interface. ## Design Considerations The connector should be placed in an accessible area of the PCB to allow SIM card installation and removal. Designers should avoid excessive mechanical stress on the hinged lid, improper solder joint loading, contamination of the contact area, and operation beyond the specified environmental and electrical ratings. ## Hashtags #commonpartslibrary #connector #simconnector #microsimconnector #wurthelektronik #wrcrd #cardconnector #memoryconnector #interconnect #pcbconnector #surfacemount #rightangleconnector #smtcomponent #goldplatedcontacts #embeddedhardware #iotdevices #wirelessmodules #communicationdevices #networkingequipment #pcbdesign #hardwaredesign #electronicscomponents #electronicparts #componentlibrary #engineeringparts #electronicsengineering

Asynchronous Communications Interface Adapter (ACIA) – Serial communication interface IC designed for 8-bit microprocessor systems, embedded computers, industrial controllers, terminals, modems, and legacy communication equipment. The Western Design Center W65C51N6TPG-14 provides a simple interface between an 8-bit CPU and serial communication devices, handling the conversion between parallel CPU data and asynchronous serial data. It operates at 5 V, supports communication speeds up to 14 MHz, and uses a 28-pin PDIP through-hole package. #WesternDesignCenter #W65C51N #W65C51N6TPG14 #ACIA #SerialCommunication #InterfaceIC #8BitProcessor #EmbeddedSystems #IndustrialElectronics #ThroughHole #PDIP28

Quad-Channel, Software Configurable Input and Output with HART Modem,AVDD_HI = +6V to +28.8V, AVDD_LO = +6V to +28.8V, #CommonPartsLibrary #IntegratedCircuit #data-acquisition #ADCs #DACs

8km UART Through Hole RF Transceiver Modules and Modems RoHS,3.3V~5.2V,-40 ~ 80C The E32-433T30D is based on the Semtech SX1278 LoRa chipset and uses LoRa spread-spectrum modulation to achieve long-distance, highly reliable wireless communication even in noisy environments. It communicates with a microcontroller via UART (serial interface), making it easy to integrate with Arduino, ESP32, STM32, and similar systems. It is commonly used for IoT telemetry, remote control systems, sensor networks, and industrial monitoring, especially where GSM/Wi-Fi is unavailable or impractical. Key Features Frequency range: 410–441 MHz (433 MHz default) RF output power: 21–30 dBm (up to 1 W high-power version) LoRa modulation: High sensitivity and strong anti-interference Communication distance: up to ~8 km (open area, ideal conditions) Interface: UART TTL serial (3.3 V logic level) Sensitivity: around -147 dBm for long-range reception Low data rate support: ~0.3 kbps to 19.2 kbps Half-duplex communication (TX/RX not simultaneous) Configurable modes: normal / wake-up / power-saving / sleep via M0 & M1 pins Compact module size with SMA antenna connector Wide operating temperature: -40 °C to +85 °C Important Notes Requires external microcontroller (MCU) for operation (not standalone). Must not leave M0 and M1 pins floating (must be defined HIGH/LOW or GND). Works best with proper 433 MHz antenna (2–5 dBi recommended). Power supply must be stable (typically 5V with sufficient current capability). For maximum range, line-of-sight + correct antenna height matters more than raw power. Applications Smart agriculture monitoring Remote sensor networks Utility meter reading (water/gas) Industrial telemetry systems Drone/robot communication links Remote control & automation systems #E32_433T30D #Ebyte #LoRa #SX1278 #WirelessModule #IoT #Telemetry #LongRangeCommunication #UART #433MHzLoRa #EmbeddedSystems

Transceiver 433MHz IPEX interface -100dBm 1km SPI SMD,20x14mm RF Transceiver Modules and Modems RoHS The E04-400M16S is based on STMicroelectronics' S2-LPQTR chip as the core, it is an ultra-small size chip wireless transceiver RF module independently developed by Ebyte, working in the 433M/470M frequency band, with a maximum transmission power of 16dBm. Since this module is a SPI pure hardware radio frequency transceiver module, it needs to be driven by MCU. Features  Ultra-small size, only 14x20mm;  The communication distance can reach 1km under ideal conditions;  The maximum transmit power is 16dBm;  The receiving current (RX) is as low as 7mA, and the transmitting current (TX) is as low as 10mA@10dBm;  Low power consumption, suitable for battery-powered applications;  Support 433M/470M frequency band;  Support multiple debugging modes of 2(G)FSK, 4(G)FSK, OOK, ASK;  Support 2.5V～3.6V power supply, power supply greater than 3.3V can guarantee the best performance;  Industrial-grade standard design, supporting long-term use at -40～85℃;  IPEX interface and stamp hole are optional, which is convenient for users to develop and integrate. Application  Smart meeting  Wireless alarm system  Smart door lock  Building automation  Industrial acquisition and control  Intelligent lighting system #E04_400M16S #EBYTE #S2LP #RFModule #WirelessTransceiver #433MHz #470MHz #IoT #IndustrialAutomation #SmartHome #LongRangeWireless #SPI #LowPowerRF #EmbeddedSystems #WirelessCommunication

2.4GHz -98dBm SMD,19.2x18mm RF Transceiver Modules and Modems RoHS The ESP32-WROOM-32UE-N16 is a 2.4 GHz wireless MCU module built around the ESP32 SoC. It combines a dual-core processor, integrated Wi-Fi (802.11 b/g/n) and Bluetooth 4.2 (Classic + BLE), along with rich peripherals. The “UE” variant specifically uses a U.FL / IPEX connector for an external antenna, making it ideal for applications that require better RF performance or flexible antenna placement (e.g., enclosed products or long-range communication). The “N16” indicates 16 MB external flash memory, suitable for large firmware, OTA updates, and data-heavy applications. Processing Dual-core Xtensa LX6 32-bit CPU Clock speed up to 240 MHz Memory 16 MB Flash (N16 variant) ~520 KB SRAM + 448 KB ROM Connectivity Wi-Fi: 802.11 b/g/n (up to 150 Mbps) Bluetooth: v4.2 (BR/EDR + BLE) Frequency: 2.4 GHz band Antenna External antenna via U.FL connector Better range and flexibility vs PCB antenna Interfaces / Peripherals GPIO (≈26 usable pins) UART, SPI, I2C, I2S, SDIO ADC, DAC PWM (LED & motor control) Capacitive touch sensing Security Hardware encryption: AES, SHA, RSA Secure boot & flash encryption support Power Operating voltage: 3.0V – 3.6V (typ. 3.3V) Multiple low-power modes for battery applications Environmental Operating temperature: -40°C to +85°C Physical Surface-mount module (~38 pins / 52 pads depending on reference) Compact and RF-shielded design Typical Applications Smart home devices (IoT) Industrial automation Wireless sensors and data loggers Wearables and consumer electronics Remote monitoring systems #Module #ESP32

High Efficiency 2.5A 1.2MHz Step-Up Converter The MT3608L is a constant frequency, 6-pin SOT23 current mode step-up converter intended for small, low power applications. The MT3608L switches at 1.2MHz and allows the use of tiny, low cost capacitors and inductors 2mm or less in height. Internal soft-start results in small inrush current and extends battery life. The MT3608L features automatic shifting to pulse frequency modulation mode at light loads. The MT3608L includes under-voltage lockout, current limiting, and thermal overload protection to prevent damage in the event of an output overload. The MT3608L is available in a small 6-pin SOT-23 package FEATURES ⚫ Integrated 80mΩ Power MOSFET ⚫ 2.2V to 16V Input Voltage ⚫ 1.2MHz Fixed Switching Frequency ⚫ Adjustable Over Current Protection: 0.5A ~2.5A ⚫ Internal 2.5A Switch Current Limit(OC pin floating) ⚫ Adjustable Output Voltage ⚫ Internal Compensation ⚫ Over Voltage Protection ⚫ Up to 20V Output Voltage ⚫ Automatic Pulse Frequency Modulation Mode at Light Loads ⚫ up to 93% Efficiency ⚫ Available in a 6-Pin SOT23-6 Package APPLICATIONS ⚫ Battery-Powered Equipment ⚫ Set-Top Boxed ⚫ LCD Bais Supply ⚫ DSL and Cable Modems and Routers ⚫ Networking cards powered from PCI or PCI express slots #CommonPartsLibrary #IntegratedCircuit #PowerManagement