±12.5A Bidirectional Hall-Effect Current Sensor, +3.3V supply, 110mV/A, SOIC-8 hall effect current monitor sensor isolated SOIC*3.9x4.9mm*P1.27mm*

Hall Effect Sensor Single Axis SOT-23-3 Hall-Effect Sensor for linear magnetic field sensing, providing an analog ratiometric voltage output proportional to the applied magnetic flux density. The DRV5056A4QDBZR operates from a 2.7 V to 38 V supply, supports unidirectional magnetic field detection, and features a 20 kHz bandwidth with integrated temperature compensation for stable operation over the specified operating temperature range. #HallEffectSensor #LinearHallSensor #MagneticFieldSensor #AnalogOutput #RatiometricOutput #2.7Vto38V #20kHzBandwidth #TexasInstruments #DRV5056A4QDBZR

5V Linear Hall-Effect Current Sensor with ±2.5% Accuracy Over Temperature #ultralibrarian

3kVRMS Isolated Hall-Effect Current Sensor with 500VRMS Working Voltage ±2.5% Accuracy #ultralibrarian

5V Linear Hall-Effect Current Sensor with ±2.5% Accuracy Over Temperature #ultralibrarian

5V Linear Hall-Effect Current Sensor with ±2.5% Accuracy Over Temperature #ultralibrarian

3kVRMS Isolated Hall-Effect Current Sensor with 500VRMS Working Voltage ±2.5% Accuracy #ultralibrarian

3kVRMS Isolated Hall-Effect Current Sensor with 500VRMS Working Voltage ±2.5% Accuracy #ultralibrarian

Ultra-Low-Power Omnipolar Hall-Effect Switch – Digital omnipolar Hall-effect switch optimized for lid/door detection, proximity sensing, magnetic position detection, industrial controls, consumer electronics, and battery-powered embedded systems. Operates from a 1.65 V to 5.5 V supply with an ultra-low 3 µA maximum supply current, making it ideal for low-power applications. Features a push-pull digital output, omnipolar operation (responds to either north or south magnetic poles), sleep mode, and high magnetic sensitivity with ±3 mT typical operate point and ±0.8 mT typical release point. Supports up to 5 mA output current, provides built-in hysteresis for noise immunity, and operates over a −40°C to +125°C temperature range. Housed in a compact 3-pin SOT-23 (DBZ) surface-mount package. #TexasInstruments #TMAG5231C1DQDBZR #TMAG5231 #HallEffectSensor #OmnipolarSwitch #MagneticSensor #PositionSensor #ProximitySensor #LowPower #BatteryPowered #SOT23 #EmbeddedSystems

±12A Bidirectional Hall-Effect Current Sensor, +5.0V supply, 166mV/A, SOIC-16 hall effect current monitor sensor isolated SOIC*7.5x10.3mm*P1.27mm*

±10A Bidirectional, Hall-Effect Current Sensor, +3.3V supply, 133mV/A, SOIC-16W hall effect current monitor sensor isolated SOIC*7.5x10.3mm*P1.27mm*

Proximity Sensors 2 x Capacitive, Hall-effect & Inductive #commonpartslibrary #integratedcircuit #sensor

These Hall-effect latches are temperature-stable and stress-resistant sensors especially suited for electronic commutation in brushless dc motors using multipole ring magnets. Each device includes a voltage regulator, quadratic Hall voltage generator, temperature compensation circuit, signal amplifier, Schmitt trigger, and an open-collector output on a single silicon chip. The on-board regulator permits operation with supply voltages of 4.5 volts to 18 volts. The switch output can sink 10 mA. With suitable output pull up, they can be used directly with bipolar or MOS logic circuits.

±5A Bidirectional Hall-Effect Current Sensor, +5.0V supply, 185mV/A, SOIC-8 hall effect current monitor sensor isolated SOIC*3.9x4.9m*P1.27mm*

3kVRMS Isolated Hall-Effect Current Sensor with 500VRMS Working Voltage ±2.5% Accuracy #ultralibrarian

3kVRMS Isolated Hall-Effect Current Sensor with 500VRMS Working Voltage ±2.5% Accuracy #ultralibrarian

3kVRMS Isolated Hall-Effect Current Sensor with 500VRMS Working Voltage ±2.5% Accuracy #ultralibrarian