Non-Isolated PoL Module DC DC Converter 1 Output 1 ~ 16V 1.5A 4.2V - 60V Input #CommonPartsLibrary #Power-Supply #DCDC-Converter #HotRod™

Linear Regulator Replacement DC DC Converter 1 Output 5V 500mA 6V - 28V Input #CommonPartsLibrary #Power-Supply #DCDC-Converter

N-Channel 100 V 100A (Tc) 2.5W (Ta), 139W (Tc) Surface Mount PG-TDSON-8-7 BSC040N10NS5ATMA1 is a high-performance 100V N-Channel Power MOSFET from Infineon's OptiMOS™ 5 family. It is designed for high-efficiency switching applications such as switched-mode power supplies (SMPS), synchronous rectification, DC-DC converters, motor drives, battery-powered systems, and industrial power management. The device features extremely low on-resistance, high current capability, and excellent thermal performance, making it suitable for demanding power conversion applications. Key Features N-Channel Enhancement Mode MOSFET 100V Drain-to-Source Voltage (VDS) Ultra-low RDS(on): 4.0 mΩ max @ VGS = 10V Continuous Drain Current up to 100A (package limited) Optimized for high-performance SMPS and synchronous rectification Low gate charge for improved switching efficiency 100% avalanche tested for enhanced robustness Superior thermal resistance and power dissipation Wide operating junction temperature range: -55°C to +150°C RoHS compliant and halogen-free Compact PG-TDSON-8 / SuperSO8 package for high power density designs Typical Applications DC-DC Converters Synchronous Rectifiers Motor Control Battery Management Systems (BMS) Telecom and Industrial Power Supplies Solar Power Systems High-Current Switching Circuits #Infineon #OptiMOS5 #MOSFET #NChannelMOSFET #PowerMOSFET #100V #LowRDSon #SMPS #DCDCConverter #MotorDrive #PowerElectronics #IndustrialElectronics #BSC040N10NS5ATMA1 #HighEfficiency #SynchronousRectification

Buck Switching Regulator IC Positive Adjustable 1.2V 1 Output 3.5A 8-PowerSOIC (0.154", 3.90mm Width) The LM5013DDAR is a 100-V input, 3.5-A buck switching regulator IC that efficiently steps down high DC voltages (such as 24 V, 48 V, or battery rails) to lower regulated outputs. It is optimized for rugged environments where wide input variations and high reliability are required. It features ultra-low quiescent current operation, making it suitable for systems that require high efficiency even at light load or standby conditions. Key Features Wide input voltage range: 6 V to 100 V Up to 3.5 A output current capability Integrated 100-V high-side MOSFET Non-synchronous buck topology Ultra-low quiescent current (IQ) for high efficiency in standby Constant-on-time (COT) control for fast transient response No external compensation components required Adjustable output voltage (down to ~1.2 V reference) 50 ns minimum on/off time for high step-down ratios Built-in protection features: Overcurrent protection Thermal shutdown Input undervoltage lockout (UVLO) Open-drain power-good (PGOOD) signal for system monitoring Meets low EMI requirements (CISPR 25 Class 5 capable) Package 8-pin SO PowerPAD (DDA) surface-mount package Designed for good thermal performance in high-voltage applications Typical Applications Industrial power supplies (24 V / 48 V systems) Automotive power systems Telecom and networking equipment High cell-count battery systems Motor control and inverter subsystems #LM5013 #BuckConverter #DCDCConverter #TexasInstruments #PowerManagementIC #HighVoltageRegulator #3ARegulator #IndustrialPower #AutomotiveElectronics #SwitchingRegulator #COTController

Buck-Boost Switching Regulator IC Positive Adjustable (Fixed) 6.5V (11.5V) 1 Output 6A 22-PowerWFQFN The MAX25239/MAX25240 are small, synchronous, buck-boost converters with integrated H-bridge switches. These ICs provide a fixed-output regulation voltage and an externally adjustable output voltage in the 3V to 20V range with an input voltage above, below, or equal to the output regulation voltage. The ICs have typical 8.2A and 10A input current limit options and can support continuous load currents up to 6A depending on the input-to-output voltage ratio and operating frequency. It also has a wide input voltage range of 2V to 36V. The MAX25239/MAX25240 have three switching frequency options: 2.1MHz, 400kHz, and 200kHz. The 2.1MHz high switching frequency allows small external components and reduced output ripple, and guarantees no AM band interference, while the 400kHz or 200kHz switching frequency offers better efficiency and relieves the power consumption concern. The SYNC input allows three operation modes: skip mode with ultra-low quiescent current, forced fixed-frequency PWM operation, and synchronization to an external clock. The IC also includes spread-spectrum frequency modulation to minimize EMI interference. The MAX25239/MAX25240 feature a power-OK (POK) indicator, undervoltage lockout, overvoltage protection, cycle-by-cycle current limit, and thermal shutdown. The ICs are available in small, 4.25mm x 4.25mm x 0.75mm, 22-pin FC2QFN and 5.00mm x 5.00mm x 0.75mm, 18- pin FCQFN packages. Key Features Wide 2 V to 36 V input voltage range Synchronous buck-boost topology for seamless step-up and step-down conversion Delivers up to 6 A continuous output current Adjustable output voltage from 3 V to 20 V (device variant includes fixed output configuration options) High conversion efficiency with integrated low-RDS(ON) MOSFETs 400 kHz switching frequency with spread-spectrum option for reduced EMI Very low 95 µA quiescent current in standby and 10 µA shutdown current Integrated protection features including overvoltage, short-circuit, thermal shutdown, and undervoltage lockout (UVLO) Power-Good (PGOOD) output for power monitoring AEC-Q100 qualified for automotive applications Operating junction temperature range: −40°C to +150°C Compact 22-pin FC2QFN (4.25 × 4.25 mm) package #MAX25240AFFFVY #AnalogDevices #BuckBoostConverter #DCDCConverter #PowerManagement #AutomotiveElectronics #AECQ100 #SwitchingRegulator #EmbeddedSystems #AutomotivePower