Offline Flyback SMPS Transformer – Surface-mount flyback transformer optimized for offline AC-DC LED drivers and switch-mode power supplies (SMPS) using flyback converter topologies. Designed for 120 V to 375 V DC primary input, it features 800 µH primary inductance (at 10 kHz), 68 kHz to 100 kHz switching frequency, and 4500 Vrms reinforced isolation between primary and secondary windings for enhanced safety. Includes dual 5 V secondary windings (2 A each) and a 20 V auxiliary winding (configurable as 6 V + 14 V) for controller bias and feedback circuitry. Complies with IEC 61558-2-16 reinforced insulation requirements, operates over a −40°C to +125°C temperature range, and is housed in a compact EFD20 surface-mount package for high-density power supply designs. #WurthElektronik #750811611 #FlybackTransformer #SMPSTransformer #OfflinePowerSupply #ACDCConverter #LEDDriver #FlybackConverter #PowerTransformer #4500VrmsIsolation #EFD20 #EmbeddedSystems

Crystal, 12 MHz, SMD, 3.2mm x 2.5mm, 30 ppm, 10 pF, 30 ppm, ABM8 Series ABM8-272-T3 is an ultra-miniature surface-mount quartz crystal from Abracon designed for precision clock generation in embedded systems and microcontroller applications. The crystal operates at 12.000MHz in fundamental AT-cut mode and is packaged in a compact 3.2mm × 2.5mm × 0.8mm ceramic SMD package. It features ±30ppm frequency tolerance and stability, 10pF load capacitance, 50Ω maximum ESR, and low drive power requirements. The device operates across an industrial temperature range of -40°C to +85°C and is hermetically sealed with MSL1 moisture sensitivity rating. The ABM8-272-T3 is approved for use with Raspberry Pi RP2040 and RP235x microcontrollers and is suitable for embedded controllers, IoT devices, communication equipment, industrial electronics, and precision timing applications. Search Keywords: ABM8-272-T3, Abracon ABM8, 12MHz crystal, 12.000MHz crystal, quartz crystal, SMD crystal, ceramic crystal resonator, RP2040 crystal, RP2350 crystal, Raspberry Pi crystal, clock crystal, oscillator crystal, timing crystal, MCU clock source, embedded crystal, surface mount crystal, AT cut crystal, 10pF crystal, 3.2x2.5mm crystal, frequency reference Hashtags: #ABM8272T3 #Abracon #12MHzCrystal #QuartzCrystal #SMDCrystal #ClockSource #Oscillator #TimingCircuit #RP2040 #RP2350 #RaspberryPi #Microcontroller #EmbeddedSystems #IoT #Electronics #ElectronicComponents #PCBDesign #HardwareDesign #FrequencyReference #CrystalOscillator

PIC PIC® XLP™ 16F Microcontroller IC 8-Bit 32MHz 28KB (16K x 14) FLASH 28-UQFN (4x4) 8-bit PIC microcontroller for embedded control applications, operating from a 1.8 V to 3.6 V supply with a maximum CPU frequency of 32 MHz. It integrates 28 KB Flash, 2 KB RAM, 256 bytes EEPROM, a 12-bit ADC with up to 20 channels, 5-bit DAC, SPI, I²C, and EUSART interfaces, 24 GPIOs, LCD controller support, multiple timers, PWM, comparators, and Core Independent Peripherals in a 28-pin UQFN package. #Microcontroller #8BitMCU #PIC16LF19156 #Microchip #EmbeddedSystems #FlashMCU #LowPower #12BitADC #SPI #I2C #EUSART #PWM #LCDController #UQFN28 #PCBLibrary

Ultra-Low Phase Noise HCMOS Crystal Oscillator – 3.3 V HCMOS crystal clock oscillator optimized for high-definition audio equipment, DACs, ADCs, digital audio broadcasting (DAB), professional audio systems, precision instrumentation, and embedded timing applications. Provides a 22.5792 MHz output frequency with ±25 ppm frequency stability, operating from a 3.3 V ±0.3 V supply while consuming 15 mA typical (25 mA maximum). Features ultra-low phase noise of −100 dBc/Hz typical at 10 Hz offset, a −169 dBc/Hz noise floor, HCMOS output, enable/disable (standby) function with tri-state output, 200 ns maximum disable time, 3 ns maximum rise/fall time, and ±24 mA output drive for high-performance clock generation. Designed for surface-mount assembly in a 4-pad 14.2 × 9.14 mm package, it operates over a 0°C to +70°C temperature range. #Crystek #CCHD95725225792 #CCHD957 #CrystalOscillator #HCMOSOscillator #LowPhaseNoise #ClockGenerator #AudioClock #PrecisionTiming #SurfaceMount #EmbeddedSystems

4.0 mm, Round, Omnidirectional, Surface Mount, 2.0 Vdc, Electret Condenser Microphone Electret condenser microphone with omnidirectional directivity and analog output. It operates at a standard 2 VDC supply voltage (10 VDC maximum), with a frequency range of 20 Hz to 20 kHz, typical sensitivity of -42 dB, 2.2 kΩ output impedance, 0.5 mA current consumption, and a Ø4.0 × 1.3 mm surface-mount package. #Microphone #ElectretCondenser #Omnidirectional #Analog #SurfaceMount #Audio

20 Hz ~ 10 kHz Analog Microphone MEMS (Silicon) 1.5 V ~ 3.6 V Omnidirectional (-38dB ±1dB) Solder Pads Microphone, Electret Condenser Microphone (ECM) for audio signal capture with an omnidirectional pickup pattern and analog output. The CMM-2718AT-3817NC-TR features a 27 mm × 18 mm × 9.7 mm package, operating voltage of 1.5 V to 10 V, sensitivity of -38 ±3 dB, and frequency response of 100 Hz to 10 kHz. #Microphone #ElectretCondenserMicrophone #AudioComponent #ECM #PCBComponent

Semi-Shielded Power Inductor – 100 µH semi-shielded wirewound power inductor for DC-DC converters, power supplies, energy storage, and EMI filtering. Features a ferrite drum core, 1 A RMS current rating, 1.2 A saturation current, 433 mΩ maximum DC resistance (DCR), and ±20% inductance tolerance. Provides a 6.3 MHz self-resonant frequency, surface-mount (SMD) construction, AEC-Q200 automotive qualification, and operates over a −40°C to +125°C temperature range. Housed in a 6.0 × 6.0 × 4.5 mm (6045) semi-shielded package as part of the WE-LQS series. #WurthElektronik #74404064101 #WELQS #PowerInductor #SemiShieldedInductor #100uH #Wirewound #SMD #DCDCConverter #PowerSupply #AECQ200 #EmbeddedSystems

Ultra-Wideband Embedded Cellular/LTE Antenna – Wideband surface-mount embedded cellular antenna optimized for LTE, 5G (Sub-6 GHz), LPWA, NB-IoT, Cat-M1, telematics, asset tracking, industrial IoT, smart meters, and embedded wireless applications. Covers 698–960 MHz, 1710–2700 MHz, and 3300–3800 MHz, supporting major 2G, 3G, 4G LTE, LTE-M, NB-IoT, LPWA, and Sub-6 GHz 5G frequency bands. Features 50 Ω impedance, 2 W maximum input power, VSWR ≤ 2.5:1, surface-mount (SMT) flat-bar construction, and Isolated Magnetic Dipole™ (IMD) technology for stable antenna performance with minimal ground-plane sensitivity. Measures 49.6 × 8.0 × 3.2 mm, operates over a −40°C to +85°C temperature range, and is supplied in tape-and-reel packaging for automated assembly. #KYOCERAAVX #P822601 #Prestta #EmbeddedAntenna #LTEAntenna #5GAntenna #NBIoT #LTEM #LPWA #CellularAntenna #RF #EmbeddedSystems

4.897 MHz Surface-Mount Quartz Crystal – AT-cut fundamental-mode quartz crystal designed for microcontrollers, wireless modules, communication equipment, industrial control systems, timing circuits, embedded electronics, and IoT devices. Part of the Abracon ABLS Series, it provides a 4.897 MHz operating frequency with ±50 ppm frequency tolerance, ±50 ppm frequency stability, 20 pF load capacitance, and 70 Ω maximum ESR for reliable clock generation. Features a 100 µW typical drive level (1 mW max), HC-49/US low-profile SMD package, and fundamental resonance mode for stable oscillator performance. Designed for surface-mount assembly, it operates over a −40°C to +85°C temperature range and is suitable for general-purpose embedded and industrial timing applications. #Abracon #ABLS4897MHZ20R70DT #QuartzCrystal #49MHzCrystal #ClockCrystal #TimingDevice #HC49US #SMDCrystal #Microcontroller #IndustrialElectronics #EmbeddedSystems

Converter Offline Buck, Buck-Boost, Flyback Topology 66kHz 8-PDIP-B Offline switcher IC with an integrated 700 V power MOSFET for non-isolated buck, buck-boost, and flyback AC-DC power supplies. It operates with ON/OFF control at a typical switching frequency of 66 kHz, includes auto-restart, cycle-by-cycle current limiting, thermal shutdown, and line undervoltage detection for low-power power conversion applications. #OfflineSwitcherIC #ACDCConverter #LinkSwitchTN #PowerIntegrations