Humidity, Temperature 0 ~ 100% RH I2C ±1.8% RH 4 s Surface Mount SHT40 / SHT41 Sensirion SHT4x Series (SHT40 / SHT41 / SHT43 / SHT45) – ultra-low-power digital humidity and temperature sensor with I²C interface. Provides high-accuracy relative humidity (RH) and temperature measurements in a compact 1.5 mm × 1.5 mm DFN package. Features factory calibration, CRC-protected communication, integrated heater, multiple I²C addresses, low current consumption, and optional PTFE membrane protection. Suitable for battery-powered, industrial, consumer, wearable, medical, HVAC, and IoT applications. Search Keywords: SHT4x, SHT40, SHT41, SHT43, SHT45, Sensirion Humidity Sensor, Temperature Sensor, Digital Humidity Sensor, Digital Temperature Sensor, RH Sensor, Relative Humidity Sensor, I2C Sensor, Environmental Sensor, Ultra Low Power Sensor, Precision Humidity Sensor, Precision Temperature Sensor, Industrial Sensor, IoT Sensor, HVAC Sensor, Battery Powered Sensor, DFN4 Sensor Hashtags: #SHT4x #SHT40 #SHT41 #SHT43 #SHT45 #Sensirion #HumiditySensor #TemperatureSensor #RHSensor #EnvironmentalSensor #I2C #I2CSensor #DigitalSensor #LowPowerSensor #IoT #HVAC #WearableElectronics #IndustrialElectronics #EmbeddedSystems #PCBDesign

Single Non-Inverting 3-State Buffer IC – Single non-inverting CMOS buffer with a 3-state output and TTL-compatible inputs for signal buffering, bus interfacing, memory address/data buses, digital logic control, and embedded systems. Operates from a 4.5 V to 5.5 V supply and features 8 mA source/sink output drive capability, active-low output enable (OE), and high-impedance output mode for shared bus applications. Provides high-speed operation with a typical propagation delay of 8.5 ns, low power CMOS operation, latch-up performance exceeding 250 mA, and ESD protection compliant with HBM and CDM standards. Specified for operation over a −40°C to +125°C temperature range and housed in a compact 5-pin SOT-23 (DBV) surface-mount package. #TexasInstruments #SN74AHCT1G125DBVR #SN74AHCT1G125 #LogicBuffer #TriStateBuffer #BusBuffer #TTLCompatible #CMOSLogic #SignalBuffer #DigitalLogic #SOT23 #EmbeddedSystems

Multiphase Motor Driver Power MOSFET SPI 48-VQFN (7x7) DRV8353RSRGZR is a three-phase smart gate driver designed to control external N-channel MOSFETs in brushless DC (BLDC), permanent magnet synchronous motor (PMSM), and other three-phase motor drive applications. It operates from a 9 V to 100 V supply, supports SPI communication for device configuration and diagnostics, integrates three high-side and three low-side gate drivers with programmable gate drive strength, and includes protection features such as VDS overcurrent, undervoltage, overtemperature, and gate driver fault detection in a 48-pin VQFN package. #TexasInstruments #DRV8353RSRGZR #GateDriver #ThreePhaseMotorDriver #BLDC #PMSM #MOSFETDriver #SPI #MotorControl #VQFN48

High-Speed 3.3V/5V RS-485/RS-422 Transceiver with ±35kV HBM ESD Protection, SOIC8 High-Speed 3.3V/5V RS-485/RS-422 Transceiver ESD 42Mbps SOIC*3.9x4.9mm*P1.27mm*

Automotive 8 A Synchronous Buck Converter IC – High-efficiency synchronous step-down (buck) DC-DC converter optimized for automotive power supplies, industrial automation, networking equipment, point-of-load regulation, and embedded power applications. Operates from a 4.5 V to 28 V input voltage and provides an adjustable output voltage from 0.6 V to 13 V with up to 8 A continuous output current. Features integrated high-side (20.4 mΩ) and low-side (9.5 mΩ) MOSFETs, D-CAP3™ control architecture for fast transient response, 45 µA typical quiescent current, selectable switching frequencies of 500 kHz, 800 kHz, or 1.2 MHz, pre-biased startup, power-good (PG) output, soft-start, frequency synchronization, and light-load Eco-mode™ operation for improved efficiency. Includes comprehensive protection with cycle-by-cycle current limiting, undervoltage lockout (UVLO), overvoltage protection (OVP), thermal shutdown, and hiccup-mode short-circuit protection. Specified for operation over a −40°C to +150°C junction temperature and housed in a compact 10-pin VQFN-HR (3 × 3 mm) package. #TexasInstruments #TPS56837RPAR #TPS56837 #BuckConverter #SynchronousBuck #DCDCConverter #PowerManagement #PointOfLoad #IndustrialElectronics #AutomotiveElectronics #VQFN10 #EmbeddedSystems

Isolated IEEE 802.3af PoE Powered Device (PD) DC-DC Converter Module – High-efficiency isolated Power over Ethernet (PoE) DC-DC converter module designed for IP cameras, VoIP phones, wireless access points, industrial Ethernet devices, IoT gateways, embedded networking equipment, and PoE-powered systems. Delivers a regulated 5 V output at up to 5.1 A (25.5 W) from a 37 V to 57 V PoE input, compliant with IEEE 802.3af PoE Powered Device (PD) requirements. Features 2.25 kVDC input-to-output isolation, up to 90.5% efficiency, low ripple and noise (150 mVp-p max), integrated PoE interface, overcurrent, overvoltage, and short-circuit protection, and support for T2P and adapter OR-ing. Designed for surface-mount assembly in a compact 35.5 × 22.4 × 10.6 mm module, it operates over a −40°C to +85°C temperature range, making it ideal for commercial and industrial embedded power applications. #MurataPowerSolutions #MYBSP0055AABFT #PoEConverter #DCDCConverter #PowerOverEthernet #IEEE8023af #IsolatedPowerModule #IndustrialEthernet #EmbeddedPower #IoT #SurfaceMount #EmbeddedSystems

Fast-Acting Surface-Mount Fuse – 15 A fast-acting surface-mount fuse for overcurrent protection in power supplies, DC-DC converters, automotive electronics, industrial equipment, battery-powered devices, and embedded systems. Features a 32 VDC voltage rating, 15 A current rating, and a 300 A interrupt rating at rated voltage, providing rapid protection against overloads and short circuits. Part of the Littelfuse NANO²® 451 Series, it offers low cold resistance (5.1 mΩ typical), 97.8 A²s melting I²t, fast-blow response, and is AEC-Q200 qualified for automotive applications. Designed in a compact 1206 (3216 Metric) surface-mount package, it operates over a −55°C to +125°C temperature range and carries UL and CSA safety approvals. #Littelfuse #0451015MRL #NANO2451 #SurfaceMountFuse #FastActingFuse #CircuitProtection #OvercurrentProtection #SMDFuse #AECQ200 #PowerManagement #1206 #EmbeddedSystems

Polymeric PTC Resettable Fuse – Surface-mount resettable overcurrent protection device with a 9 V maximum operating voltage, 200 mA hold current (Ih), 500 mA trip current (It), and 100 A maximum fault current. Features 400 mΩ minimum initial resistance, 3.5 Ω maximum post-trip resistance, 20 ms typical time-to-trip, and operates over a −40°C to +85°C temperature range. Housed in an 0805 (2012 Metric) concave surface-mount package. #BelFuse #0ZCK0020FF2G #PTCResettableFuse #PolymericPTC #ResettableFuse #OvercurrentProtection #CircuitProtection #SurfaceMount #0805 #PassiveComponents #EmbeddedSystems

IoT Secure Element with EdgeLock® SE051 Security Technology – Hardware-based secure element IC designed for IoT security, connected devices, industrial automation, smart home systems, automotive applications, cloud authentication, and embedded cybersecurity solutions. Provides a tamper-resistant secure environment for cryptographic key storage, device identity protection, secure authentication, and trusted communication. Features Common Criteria EAL5+ certified secure hardware, EdgeLock® secure architecture, ECC and RSA cryptographic support, AES encryption/decryption, SHA-2 hashing, HMAC, True Random Number Generator (TRNG), secure key generation, and secure object storage for protecting sensitive credentials and certificates. Supports I²C communication interface with host microcontrollers and is compatible with secure cloud platforms and IoT provisioning workflows. Operates from a 1.71 V to 3.6 V supply, supports −40°C to +105°C industrial temperature operation, and is housed in a compact 20-HX2QFN (3 × 3 mm) surface-mount package. #NXP #SE051C2HQ1Z01XDZ #EdgeLockSE051 #SecureElement #IoTSecurity #HardwareSecurity #Cryptography #SecureAuthentication #AES #ECC #RSA #TRNG #IndustrialIoT #EmbeddedSystems

Single-channel high-side N-channel smart power switch for power distribution, supporting a 6 V to 18 V load voltage and up to 11 A continuous output current. Features 8.8 mΩ typical ON resistance, non-inverting ON/OFF control, and integrated overcurrent, overvoltage, short-circuit, and undervoltage lockout (UVLO) protection. Specified for operation over a −40°C to +150°C junction temperature range and housed in a PG-TSDSO-14-22 (14-pin TSSOP exposed pad) package. #Infineon #BTS70081EPPXUMA1 #SmartPowerSwitch #HighSideSwitch #LoadSwitch #PowerDistribution #PROFET #NChannel #11A #PowerManagement #AutomotiveElectronics #TSDSO14

4-Channel ESD Protection for Super-Speed USB 3.0 Interface, USON-10 ESD protection USB 3.0 USON*2.5x1.0mm*P0.5mm*

Fuse Holder 10A 250V 1 Circuit Cartridge Through Hole PCB Fuse Holder for 5 × 20 mm cartridge fuses, designed for through-hole PCB mounting. The Eaton BK/H15-V-1 supports a maximum voltage rating of 250 V AC and a current rating of 15 A, providing a secure fuse mounting interface for circuit protection applications. #PCBComponent #FuseHolder #ThroughHole #CartridgeFuse #Eaton #CircuitProtection

Automotive Mini Blade Fuse Holder (PCB Mount) – Single-circuit PCB-mount fuse holder designed for automotive electronics, industrial equipment, power distribution boards, battery management systems, embedded controllers, and circuit protection applications. Manufactured by Keystone Electronics (Series MINI® 297), it accepts Miniature (ATM) blade fuses and is rated for 30 A and 500 V. Features a vertical through-hole PCB mounting, PC pin termination, brass contacts with tin plating for low contact resistance and reliable conductivity, and is UL recognized for safety. The compact design provides secure retention of 11.0 mm × 3.85 mm mini blade fuses, making it suitable for high-current PCB-based protection circuits in automotive and industrial environments. #KeystoneElectronics #3568 #MiniBladeFuseHolder #ATMFuseHolder #FuseHolder #CircuitProtection #PCBMount #ThroughHole #AutomotiveElectronics #IndustrialElectronics #PowerDistribution #EmbeddedSystems

Enclosed AC DC Converters 1 Output 12V 3.8A 85 ~ 305 VAC Input AC-DC power module providing a regulated 12 VDC output with up to 3.8 A (45.6 W) for PCB-mounted power conversion. It accepts a universal 85–305 VAC, 47–440 Hz input, operates with 87.5% typical efficiency, and includes short-circuit, overload, and overvoltage protection. The module is designed for free-air convection cooling and operates over an ambient temperature range of -30°C to +70°C with derating. #ACDCPowerModule #PowerSupply #PCBMount #12V #45W #UniversalInput #MeanWell #IndustrialPower

6-V to 100-V input, 3.5-A non-synchronous buck DC/DC converter with ultra-low quiescent current (IQ) Buck regulator, automotive-qualified synchronous step-down DC/DC converter with an input voltage range of 3.5 V to 100 V, delivering up to 3 A output current. Features an ultralow 9 µA quiescent current, 300 kHz to 2.2 MHz adjustable switching frequency with synchronization support, integrated high-side and low-side MOSFETs, and includes programmable soft-start, power-good output, enable input, and protection against undervoltage, overcurrent, overtemperature, and input transients. #BuckRegulator #StepDownConverter #DCDCConverter #Automotive #AECQ100 #3A #100V #SynchronousBuck #PowerManagement #TexasInstruments #LM5013Q1