Custom Ambient Light Sensor Module with LGA Footprint

N-Channel 30 V 5.7A (Ta) 1.4W (Ta) Surface Mount SOT-23-3 The AO3400A N-Channel MOSFET is a 30V N-channel enhancement-mode MOSFET designed using trench MOSFET technology. It is widely used for load switching, DC-DC converters, motor driving, and PWM control applications due to its very low on-resistance and compact SOT-23 package. It is especially popular in small electronics and embedded systems because it can be driven directly by 3.3V or 5V logic signals, making it ideal for microcontroller-based designs. Key Features Drain-Source Voltage (VDS): 30V Continuous Drain Current (ID): up to 5.7A (at 25°C) Ultra-low RDS(on): ~26.5 mΩ @ VGS = 10V ~32 mΩ @ VGS = 4.5V ~48 mΩ @ VGS = 2.5V Logic-level gate drive (works well with MCU GPIOs) Fast switching performance (ns-range switching times) Low gate charge (~6–7 nC) → efficient switching Compact SOT-23 package for space-saving PCB design Low power dissipation (~1.4W typical at 25°C ambient) Operating temperature: −55°C to +150°C Typical Applications Load switching (LEDs, sensors, small motors) Power management in battery-powered devices DC-DC converters PWM control circuits Fan and heater control in embedded systems #AO3400A #MOSFET #NChannelMOSFET #PowerElectronics #SOT23 #LoadSwitch #EmbeddedSystems #ElectronicsComponents #TrenchMOSFET #Commonpartslibrary #Transistor #FET

Battery Holder (Open) 9V 1 Cell PC Pin 9V battery holder through hole The BH9VPC is a through-hole, printed circuit board–mount battery holder designed to accommodate a single standard 9 V (PP3) battery. It provides a secure mechanical enclosure and reliable electrical interface for powering electronic assemblies directly from a PCB. The holder is constructed from durable insulating material with integrated metal contacts to ensure stable retention and consistent electrical connection during operation. Its form factor supports straightforward integration into compact designs while maintaining ease of battery replacement. Engineering Specification: The component is intended for through-hole mounting using PC pins that provide both mechanical stability and electrical connection to the circuit board. It supports one 9 V battery with standard snap terminal interface internally routed to PCB pins. The housing material is typically molded plastic with good mechanical strength and electrical insulation properties suitable for general electronic applications. Contact terminals are metal, commonly nickel-plated or equivalent, to ensure low contact resistance and corrosion resistance over repeated battery insertions. The holder is designed for vertical mounting orientation relative to the PCB, with a compact footprint suitable for space-constrained layouts. It provides sufficient retention force to secure the battery under normal handling and vibration conditions encountered in consumer and light industrial electronics. The operating characteristics are aligned with typical 9 V battery usage, supporting low to moderate current applications depending on battery capability. The part is compatible with standard wave soldering processes used in through-hole assembly. It is intended for use in ambient environmental conditions typical of indoor electronic equipment and is not inherently sealed against moisture or contaminants. The design allows easy manual insertion and removal of the battery without specialized tools, supporting maintenance and replacement in field applications. #commonpartslibrary #batteryholder

Tactile Switch SPST-NO Top Actuated Surface Mount The B3FS-1002P is a compact, surface-mount tactile switch designed for low-profile input applications. It provides a momentary contact mechanism with a distinct tactile feedback, making it suitable for user interface controls in consumer electronics, industrial devices, and compact embedded systems. The switch features a sealed construction for improved reliability and is optimized for automated PCB assembly processes. Mechanical Characteristics Mounting Type: Surface Mount (SMD) Actuator Style: Top push Actuator Height: Low profile Outline: Rectangular compact body Terminal Type: Gull-wing terminals Sealing: Dust-resistant (sealed construction) Electrical Characteristics Switch Type: Single Pole Single Throw (SPST) Contact Configuration: Normally Open (NO) Rated Voltage: Low voltage DC applications Rated Current: Suitable for signal-level switching Contact Resistance: Low initial contact resistance Insulation Resistance: High insulation resistance between terminals Operating Characteristics Operating Force: Standard tactile force (manufacturer-defined variant) Travel Distance: Short stroke tactile action Operating Life: High durability for repeated actuation cycles Bounce Time: Minimal contact bounce for reliable switching Environmental Characteristics Operating Temperature Range: Wide operating range suitable for consumer and industrial use Storage Temperature Range: Standard electronic component storage conditions Humidity Resistance: Designed to withstand typical ambient humidity conditions Material & Construction Actuator Material: High-strength polymer Housing Material: Heat-resistant plastic Contact Material: Metal alloy with surface plating for durability Terminal Finish: Solderable finish compatible with reflow soldering Packaging Information Packaging Type: Tape and reel Assembly Compatibility: Fully compatible with automated pick-and-place and reflow processes Applications Consumer electronics (keypads, remote controls) Industrial control panels Portable devices Embedded system user interfaces Wearable and compact electronics #commonpartslibrary #switch #tactile

Optical Sensor Ambient I²C 6-SMD, No Lead #commonpartslibrary #opticalsensor #ambient

Optical Sensor Ambient 560nm I²C 6-SMD Module #commonpartslibrary #sensor #Opticalsensor

Optical Sensor Ambient 550nm I2C/SMBus 6-UDFN Exposed Pad #CommonPartsLibrary #IntegratedCircuit #Sensor #Transducer #optical-Sensor #Ambient-Light #IR #UV-Sensor #OPT3004

Buck Switching Regulator IC Positive Fixed 5V 1 Output 1A SOT-23-6 The LMR50410Y5FQDBVRQ1 (part of the LMR50410-Q1 family from Texas Instruments) is a synchronous step-down (buck) DC-DC converter designed for automotive and industrial power applications. It operates over a wide input voltage range of 4 V to 36 V and can deliver up to 1 A output current, making it suitable for converting higher, unregulated voltages into stable lower voltages (e.g., 5 V or 3.3 V rails). The device integrates power switches, control circuitry, and compensation internally, allowing simple design with minimal external components and a compact PCB footprint. Key Features Power & Performance Wide input voltage range: 4 V to 36 V Output current: up to 1 A High switching frequency: 2.1 MHz (enables small inductors) High efficiency with PFM (light load) and FPWM (constant frequency) options Integration & Ease of Use Synchronous rectification (integrated high-side & low-side MOSFETs) Internal compensation (no complex external tuning) Minimal external components required Small SOT-23-6 package for compact designs Protection & Reliability Cycle-by-cycle current limit Short-circuit protection (hiccup mode) Thermal shutdown protection Undervoltage lockout (UVLO) ±1% reference voltage accuracy Automotive & Industrial Capability AEC-Q100 qualified (automotive grade) Operating temperature: Ambient: up to 125°C Junction: up to 150°C Designed for rugged automotive environments Additional Features Soft-start for controlled startup Precision enable pin for system control Monotonic startup with pre-biased output Available in fixed output (e.g., 5 V) variants Typical Applications Automotive electronics (ADAS, infotainment, lighting) Industrial power supplies Distributed power systems General-purpose DC-DC regulation #commonpartslibrary #integratedcircuit #powermanagement #voltageregulator

Optical Sensor Ambient 550nm I2C 8-SMD Module #CommonPartsLibrary #Transducers #Optical-Sensor #Ambient-Light #IR #UV-Sensor #VCNL4035

Polymeric PTC Resettable Fuse 60V 500 mA Ih Surface Mount 2-SMD 500mA resettable fuse pptc The SMD050F-2 is a surface-mount resettable fuse (PPTC – Polymer Positive Temperature Coefficient) designed to provide overcurrent protection in low-voltage electronic circuits. It operates by increasing its resistance significantly when excessive current flows, thereby limiting current and protecting downstream components. Once the fault condition is removed and the device cools, it automatically resets to its low-resistance state, enabling normal operation without replacement. This component is commonly used in power supply lines, USB ports, battery-powered devices, and general electronic protection applications where space-saving and reliability are important. Key Features Resettable overcurrent protection (self-recovering) Surface-mount package for compact PCB layouts Low resistance in normal operation Fast response to fault conditions Automatic reset after fault removal RoHS compliant and lead-free Electrical Characteristics Hold current: 0.5 A Trip current: 1.0 A (typical) Maximum voltage: 60 V Maximum current: 40 A (fault current rating) Initial resistance: low resistance range suitable for minimal voltage drop Resistance after trip: significantly increased to limit current Thermal Characteristics Operating temperature range: -40°C to +85°C Trip time dependent on applied current and ambient temperature Reset time dependent on cooling conditions Mechanical Characteristics Package type: Surface-mount (SMD) Compact footprint suitable for dense PCB layouts Compatible with standard reflow soldering processes Applications USB and peripheral port protection Power supply and DC line protection Battery pack protection Consumer electronics Industrial control circuits Compliance and Standards RoHS compliant Halogen-free (depending on manufacturer variant) Meets industry standards for resettable fuses #commonpartslibrary #circuitprotection #ptc #fuse

High Accuracy Ambient Light Sensor with I2C Interface Optical Sensor Ambient 545nm I2C 4-SMD, J-Lead #CommonPartsLibrary #sensor #Transducer #Optical-Sensor #Ambient-Light #IR #UV-Sensor #VEML7700

Ambient Light Sensors APDS-9160-003 SENSOR-SMD_AVAGO_APDS-9160-003 LCSC Part Number: C2655129 undefined Manufactured by AVAGO(安华高)

Enclosed AC DC Converters 1 Output 12V 3.8A 85 ~ 305 VAC Input AC-DC power module providing a regulated 12 VDC output with up to 3.8 A (45.6 W) for PCB-mounted power conversion. It accepts a universal 85–305 VAC, 47–440 Hz input, operates with 87.5% typical efficiency, and includes short-circuit, overload, and overvoltage protection. The module is designed for free-air convection cooling and operates over an ambient temperature range of -30°C to +70°C with derating. #ACDCPowerModule #PowerSupply #PCBMount #12V #45W #UniversalInput #MeanWell #IndustrialPower

Optical Sensor Ambient I²C 6-VFDFN #commonpartslibrary #sensor #Opticalsensor

LED Lighting WL-SWTP White, Warm 2700K 3V 20mA 120° 1206 (3216 Metric) The 158301227 is a surface-mount white LED manufactured by Würth Elektronik, belonging to the WL-SWTP series of top-view PLCC-packaged light-emitting diodes designed for general illumination, backlighting, and signal indication applications in compact electronics. It is built on a gallium nitride semiconductor chip, the standard chip technology used in high-efficiency white LED production, which achieves white light emission by combining a blue GaN die with a phosphor conversion layer that down-converts a portion of the blue photons into broader-spectrum yellow light, with the combined blue and yellow output perceived by the human eye as white light. This particular variant is characterized by a warm white Sunrise color temperature, placing it in the lowest color temperature tier of the WL-SWTP family. Warm white light at this color temperature produces a yellowish, incandescent-like appearance that is widely preferred in residential, hospitality, and ambient lighting applications where a soft, comfortable visual environment is desired. This makes the device a natural fit for LED-based replacements for incandescent and halogen light sources in T5 and T8 fluorescent tube form factor products, as well as indoor display backlights, decorative architectural lighting, and other applications where a warm light quality is specified or preferred by end users. The WL-SWTP series features fast switching, no infrared radiation, high color rendering index, slim and miniature size, low power consumption, suitability for all SMT assembly methods, a top-view emission direction, and a wide viewing angle. The high color rendering index characteristic of this device means that objects illuminated by it appear with colors close to how they would look under natural daylight illumination, which is an important quality metric in retail, museum, medical examination, and other environments where accurate color representation enhances user experience or functional accuracy. Texas Instruments The PLCC package style used in this device is a molded plastic leaded chip carrier format that provides a well-defined, mechanically stable footprint for surface-mount assembly, with the optical emitting surface oriented perpendicular to the PCB plane in the top-view configuration. This top-view orientation makes the device suitable for direct illumination of surfaces positioned above the PCB, such as diffusers, light guides, or display panels mounted parallel to the LED board. The compact 3014 package footprint allows high-density LED arrays to be assembled on narrow PCB strips or modules, which is typical in LED tube light and edge-lit backlight designs. The device is supplied on tape-and-reel packaging suitable for automated high-speed pick-and-place assembly at production volumes. Spec Sheet Identification Part Number: 158301227 Series: WL-SWTP — SMD White Top View PLCC LED Manufacturer: Würth Elektronik GmbH & Co. KG Functional Classification Device Type: Surface-mount white LED Chip Technology: Gallium Nitride (GaN) with phosphor conversion Emission Type: White light via blue die plus phosphor down-conversion View Direction: Top view — perpendicular to PCB surface Optical Characteristics Emitting Color: Sunrise warm white Color Temperature: Warm white class, lowest CCT tier in WL-SWTP family Color Rendering Index: High CRI class, suitable for color-critical applications Viewing Angle: Wide angle, broad spatial distribution Infrared Radiation: None — no IR emission Electrical Characteristics Operating Current: Standard signal LED drive current class Forward Voltage: Standard GaN white LED forward voltage class Switching Speed: Fast switching capable Thermal Characteristics Thermal Resistance, Junction to Solder Point: Defined per series specification Maximum LED Junction Temperature: Rated to elevated junction temperature class Package & Mechanical Package Type: PLCC (Plastic Leaded Chip Carrier), PLCC-2 style Package Size: 3014 SMD footprint Mounting Method: Surface mount technology (SMT) Assembly Compatibility: Suitable for all standard SMT assembly methods including reflow soldering Target Applications Signal indication and pilot lights Indoor display backlighting General illumination and commercial lighting Replacement for PLCC 3528 devices in T8 and T5 LED tube designs Architectural and ambient lighting systems Environmental & Qualification RoHS Compliance: Yes REACH Compliance: Yes Packaging Supply Format: Tape-and-reel Standard Reel Quantity: Standard volume reel per Würth packaging convention #WuerthElektronik #WuerthElectronic #WLSWTP #WhiteLED #WarmWhiteLED #SunriseLED #PLCCLED #SMDLed #3014LED #TopViewLED #GaNLED #HighCRI #LEDBacklight #GeneralIllumination #IndoorLighting #SignalLED #LightingDesign #OptoelectronicComponent #EngineeringSpec #ComponentLibrary #CommonPartsLibrary #RoHSCompliant #REACHCompliant

Optical Sensor Ambient 550nm I²C 6-UDFN Exposed Pad #commonpartslibrary #optical #sensor #transducer