Telecom Relay DPDT (2 Form C) Through Hole #commonpartslibrary #relay #dpdt

Telecom Relay DPDT (2 Form C) Through Hole The G6K-2P-Y DC5 is a compact, ultra-miniature signal relay designed for high-density PCB mounting applications. Manufactured by Omron, this relay features a DPDT (2 Form C) contact configuration and operates with a 5 VDC coil. It is optimized for switching low-level signals and is commonly used in telecommunications, test and measurement equipment, and consumer electronics where space-saving and high reliability are critical. Key Features Ultra-miniature, low-profile design for high-density mounting DPDT (2 Form C) contact configuration High sensitivity coil (low power consumption) Gold-clad contacts for low-level signal switching High reliability and long mechanical life Fully sealed construction (flux protection) Suitable for surface-mount and through-hole variants (depending on suffix) Electrical Characteristics Coil Specifications Rated Coil Voltage: 5 VDC Coil Resistance: ~125 Ω Coil Current: ~40 mA Power Consumption: ~200 mW Must Operate Voltage: ≤ 75% of rated voltage Must Release Voltage: ≥ 10% of rated voltage Contact Specifications Contact Configuration: DPDT (2 Form C) Contact Material: Gold-clad silver alloy Contact Rating: 1 A at 30 VDC 0.5 A at 125 VAC Maximum Switching Voltage: 125 VAC / 60 VDC Maximum Switching Current: 1 A Maximum Switching Power: 30 W (DC) 62.5 VA (AC) Timing Characteristics Operate Time: ≤ 3 ms Release Time: ≤ 3 ms Insulation Characteristics Insulation Resistance: ≥ 1,000 MΩ (at 500 VDC) Dielectric Strength: Between Coil and Contacts: 1,000 VAC (1 min) Between Open Contacts: 500 VAC (1 min) Mechanical Characteristics Mounting Type: Through-hole (Y variant, PCB terminal) Weight: ~1 g Enclosure: Sealed (flux-resistant) Environmental Specifications Operating Temperature Range: -40°C to +70°C Storage Temperature Range: -40°C to +85°C Vibration Resistance: 10 to 55 Hz, 1.5 mm double amplitude Shock Resistance: 1,000 m/s² Life Expectancy Mechanical Life: ≥ 100 million operations Electrical Life: ≥ 100,000 operations (at rated load) Applications Telecommunications equipment Test and measurement instruments Audio signal routing Industrial control systems Consumer electronics Package Information Manufacturer: Omron Electronics Series: G6K Part Number: G6K-2P-Y DC5 #commonpartslibrary #relay

Telecom IC Tone Decoder 8-SOIC #CommonPartsLibrary #IntegratedCircuit #Interface #Telecom #LM567

Telecom Relay DPDT 2A 12VDC (2 Form C) Surface Mount #commonpartslibrary #relay #telecomrelay #dpdt

Non-Isolated PoL Module DC DC Converter 1 Output 0.8 ~ 6V 10A 6V - 20V Input The LMZ22010TZ/NOPB is a compact, high-efficiency step-down (buck) DC-DC power module from Texas Instruments. It integrates a switching regulator, power MOSFETs, inductor, and compensation components into a single package, simplifying power supply design. This module is capable of delivering up to 10A output current with excellent thermal performance and minimal external components. It is intended for high power density applications such as industrial systems, telecommunications equipment, and embedded processing platforms. Manufacturer Information Manufacturer: Texas Instruments Part Number: LMZ22010TZ/NOPB Product Type: DC-DC Buck Power Module Key Features Integrated power module with inductor and controller Output current up to 10A Wide input voltage range High efficiency operation Adjustable output voltage Built-in protection features (thermal shutdown, overcurrent protection) Power-good output and enable control Requires minimal external components Electrical Characteristics Parameter Value Input Voltage Range 6 V to 20 V Output Voltage Range 0.8 V to 6 V (adjustable) Output Current Up to 10 A Switching Frequency ~500 kHz Efficiency Up to ~95% Operating Temperature Range -40°C to +125°C Package Information Package Type: TO-PMOD (Power Module) Mounting Type: Surface Mount Integrated inductor and power components Optimized for thermal performance Pin Configuration (Typical) Pin Name Description VIN Input supply voltage VOUT Regulated output voltage GND Ground EN Enable input FB Feedback for output adjustment PGOOD Power-good indicator Typical Applications Industrial automation systems Telecom and networking equipment FPGA / DSP / processor power rails Embedded systems Point-of-load regulation Design Considerations Ensure proper PCB layout for heat dissipation Use appropriate input/output capacitors External resistors required to set output voltage Consider airflow for high-current operation #commonpartslibrary #powersupply #dcdc #converter

Telecom Relay DPDT 2A 12VDC (2 Form C) Surface Mount #commonpartslibrary #relay #telecomrelay #dpdt

N-Channel 100 V 100A (Tc) 2.5W (Ta), 139W (Tc) Surface Mount PG-TDSON-8-7 BSC040N10NS5ATMA1 is a high-performance 100V N-Channel Power MOSFET from Infineon's OptiMOS™ 5 family. It is designed for high-efficiency switching applications such as switched-mode power supplies (SMPS), synchronous rectification, DC-DC converters, motor drives, battery-powered systems, and industrial power management. The device features extremely low on-resistance, high current capability, and excellent thermal performance, making it suitable for demanding power conversion applications. Key Features N-Channel Enhancement Mode MOSFET 100V Drain-to-Source Voltage (VDS) Ultra-low RDS(on): 4.0 mΩ max @ VGS = 10V Continuous Drain Current up to 100A (package limited) Optimized for high-performance SMPS and synchronous rectification Low gate charge for improved switching efficiency 100% avalanche tested for enhanced robustness Superior thermal resistance and power dissipation Wide operating junction temperature range: -55°C to +150°C RoHS compliant and halogen-free Compact PG-TDSON-8 / SuperSO8 package for high power density designs Typical Applications DC-DC Converters Synchronous Rectifiers Motor Control Battery Management Systems (BMS) Telecom and Industrial Power Supplies Solar Power Systems High-Current Switching Circuits #Infineon #OptiMOS5 #MOSFET #NChannelMOSFET #PowerMOSFET #100V #LowRDSon #SMPS #DCDCConverter #MotorDrive #PowerElectronics #IndustrialElectronics #BSC040N10NS5ATMA1 #HighEfficiency #SynchronousRectification

Buck Switching Regulator IC Positive Adjustable 1.2V 1 Output 3.5A 8-PowerSOIC (0.154", 3.90mm Width) The LM5013DDAR is a 100-V input, 3.5-A buck switching regulator IC that efficiently steps down high DC voltages (such as 24 V, 48 V, or battery rails) to lower regulated outputs. It is optimized for rugged environments where wide input variations and high reliability are required. It features ultra-low quiescent current operation, making it suitable for systems that require high efficiency even at light load or standby conditions. Key Features Wide input voltage range: 6 V to 100 V Up to 3.5 A output current capability Integrated 100-V high-side MOSFET Non-synchronous buck topology Ultra-low quiescent current (IQ) for high efficiency in standby Constant-on-time (COT) control for fast transient response No external compensation components required Adjustable output voltage (down to ~1.2 V reference) 50 ns minimum on/off time for high step-down ratios Built-in protection features: Overcurrent protection Thermal shutdown Input undervoltage lockout (UVLO) Open-drain power-good (PGOOD) signal for system monitoring Meets low EMI requirements (CISPR 25 Class 5 capable) Package 8-pin SO PowerPAD (DDA) surface-mount package Designed for good thermal performance in high-voltage applications Typical Applications Industrial power supplies (24 V / 48 V systems) Automotive power systems Telecom and networking equipment High cell-count battery systems Motor control and inverter subsystems #LM5013 #BuckConverter #DCDCConverter #TexasInstruments #PowerManagementIC #HighVoltageRegulator #3ARegulator #IndustrialPower #AutomotiveElectronics #SwitchingRegulator #COTController

SMAJ5.0A-Q is an automotive-grade, unidirectional Transient Voltage Suppressor (TVS) diode from Bourns. It is designed to protect sensitive electronic circuits from Electrostatic Discharge (ESD), Electrical Fast Transients (EFT), lightning-induced surges, and other transient overvoltage events. The device is commonly used on 5 V power rails and communication interfaces in automotive, industrial, and telecom applications. Key Features Unidirectional TVS diode for DC line protection. 5 V reverse standoff voltage (VRWM) suitable for 5 V systems. 6.4 V minimum breakdown voltage (VBR). 9.2 V maximum clamping voltage (VC) at peak pulse current. 400 W peak pulse power dissipation (10/1000 μs waveform). 43.5 A peak pulse current (IPP) capability. AEC-Q101 qualified for automotive applications. Fast response time (<1 ps typical) for effective transient suppression. Wide operating temperature range: -55°C to +150°C. Surface-mount DO-214AC (SMA) package for compact PCB designs. RoHS compliant and suitable for automated assembly processes. Typical Applications Automotive ECUs and power rails 5 V power supplies Telecom equipment Industrial control systems I/O ports and communication interfaces Consumer electronics requiring surge protection #CommonPartsLibrary #Diode

DTMF receiver with 4 bit output, SOIC-18 #commonpartslibrary #interface #telecom #integratedcircuit

Telecom Relay DPDT (2 Form C) Surface Mount #commonpartslibrary #relay #dpdt #TQ-SMD

Telecom IC Ethernet Switch 672-HSBGA (27x27) #commonpartslibrary #integratedcircuit #ethernet #switch #telecom

Telecom Relay DPST-NO (2 Form A) Through Hole #Relay #commonpartslibrary

Buck-Boost Regulator Positive Output Step-Up/Step-Down I2C DC-DC Controller IC 40-VQFN (6x6) The LM51772RHAR is a high-performance multi-phase bidirectional buck-boost controller designed for power conversion systems requiring efficient energy transfer between two voltage domains. The device supports seamless operation in both step-up and step-down modes and is optimized for battery-powered, automotive, industrial, and energy storage applications. The controller enables bidirectional current flow, making it suitable for battery charging, backup power systems, supercapacitor management, and high-power USB Type-C power delivery applications. The device integrates advanced control architecture for high efficiency across a wide operating range while supporting programmable current regulation, voltage regulation, and protection features. Multi-phase capability allows reduced input and output ripple currents, improved thermal distribution, and higher overall power capability. The controller supports external MOSFETs for scalable power design flexibility and includes comprehensive monitoring and fault management functions. The LM51772RHAR is designed for operation in demanding environments with robust protection features including overvoltage protection, undervoltage lockout, cycle-by-cycle current limiting, thermal shutdown, and fault reporting. Its flexible configuration and high integration level reduce external component count and simplify implementation in high-density power systems. Key Features Bidirectional synchronous buck-boost controller architecture Supports power transfer in both forward and reverse directions Multi-phase operation for increased power capability and reduced ripple Wide input and output voltage operating range High-efficiency synchronous control using external MOSFETs Programmable current and voltage regulation Peak and average current control capability Seamless transition between buck, boost, and buck-boost operating modes Integrated current sensing support Programmable switching frequency synchronization Phase interleaving support for thermal and ripple optimization External clock synchronization capability Soft-start and controlled startup sequencing Comprehensive fault detection and protection functions Overcurrent protection and short-circuit protection Overvoltage and undervoltage protection Thermal shutdown protection Fault status reporting and system monitoring support Designed for automotive and industrial power applications Compact thermally enhanced package Typical Applications Bidirectional battery charging systems Energy storage systems Automotive dual-battery architectures USB Type-C Power Delivery systems Backup power and UPS systems Supercapacitor charging and balancing Industrial DC power conversion Renewable energy power management High-power portable electronics Telecom and server power systems Electrical Characteristics Wide operating supply voltage range High switching frequency operation capability High-current multi-phase scalability Precision current regulation accuracy Low standby power consumption High-efficiency synchronous rectification support Programmable dead-time and switching parameters Stable operation across wide temperature range Package Information Package Type: VQFN Package Suffix: RHA Thermally enhanced exposed pad package Surface-mount implementation Suitable for automated assembly processes #commonpartslibrary #integratedcircuit #powermanagement #buckboost #dcdcswitchingcontrollers

Telecom Relay DPDT 2A 5VDC (2 Form C) Surface Mount #commonpartslibrary #relay #telecomrelay #dpdt