RC (Pi) EMI Filter 2nd Order Low Pass 6 Channel R = 100Ohms, C = 8.5pF 12-WFDFN Exposed Pad

RC (Pi) EMI Filter 2nd Order Low Pass 3 Channel R = 22Ohms, C = 42pF (Total) 6-TSSOP, SC-88, SOT-363 #commonpartslibrary #filter

RC (Pi) EMI Filter 2nd Order Low Pass 8 Channel R = 100Ohms, C = 8.5pF 16-WFDFN Exposed Pad

ARM® Cortex®-M4 series Microcontroller IC 32-Bit Single-Core 168MHz 1MB (1M x 8) FLASH 64-LQFP (10x10) Arm® Cortex®-M4 32b MCU+FPU, 210DMIPS, up to 1MB flash/192+4KB RAM, USB OTG HS/FS, Ethernet, 17 TIMs, 3 ADCs, 15 comm. interfaces, and camera Includes ST state-of-the-art patented technology • Core: Arm® 32-bit Cortex®-M4 CPU with FPU, Adaptive real-time accelerator (ART Accelerator) allowing 0-wait state execution from flash memory, frequency up to 168 MHz, memory protection unit, 210 DMIPS/ 1.25 DMIPS/MHz (Dhrystone 2.1), and DSP instructions • Memories – Up to 1 Mbyte of flash memory – Up to 192+4 Kbytes of SRAM including 64- Kbyte of CCM (core coupled memory) data RAM – 512 bytes of OTP memory – Flexible static memory controller supporting CompactFlash™, SRAM, PSRAM, NOR and NAND memories • LCD parallel interface, 8080/6800 modes • Clock, reset, and supply management – 1.8 V to 3.6 V application supply and I/Os – POR, PDR, PVD and BOR – 4-to-26 MHz crystal oscillator – Internal 16 MHz factory-trimmed RC (1% accuracy) – 32 kHz oscillator for RTC with calibration – Internal 32 kHz RC with calibration • Low-power operation – Sleep, Stop, and Standby modes –VBAT supply for RTC, 20×32-bit backup registers + optional 4 KB backup SRAM • 3×12-bit, 2.4 MSPS A/D converters: up to 24 channels and 7.2 MSPS in triple interleaved mode • 2×12-bit D/A converters • General-purpose DMA: 16-stream DMA controller with FIFOs and burst support • Up to 17 timers: up to twelve 16-bit and two 32- bit timers up to 168 MHz, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input • Debug mode – Serial wire debug (SWD) & JTAG interfaces – Cortex-M4 Embedded Trace Macrocell™ • Up to 140 I/O ports with interrupt capability – Up to 136 fast I/Os up to 84 MHz – Up to 138 5 V-tolerant I/Os • Up to 15 communication interfaces – Up to 3 × I2C interfaces (SMBus/PMBus) – Up to 4 USARTs/2 UARTs (10.5 Mbit/s, ISO 7816 interface, LIN, IrDA, modem control) – Up to 3 SPIs (42 Mbits/s), 2 with muxed full-duplex I2S to achieve audio class accuracy via internal audio PLL or external clock – 2 × CAN interfaces (2.0B Active) – SDIO interface • Advanced connectivity – USB 2.0 full-speed device/host/OTG controller with on-chip PHY – USB 2.0 high-speed/full-speed device/host/OTG controller with dedicated DMA, on-chip full-speed PHY and ULPI – 10/100 Ethernet MAC with dedicated DMA: supports IEEE 1588v2 hardware, MII/RMII #commonpartslibrary #integratedcircuit #microcontroller

ARM Microcontrollers - MCU ARM M4 1024 FLASH 168 Mhz 192kB SRAM 100-LQFP (14x14) Arm® Cortex®-M4 32b MCU+FPU, 210DMIPS, up to 1MB Flash/192+4KB RAM, USB OTG HS/FS, Ethernet, 17 TIMs, 3 ADCs, 15 comm. interfaces & camera • Core: Arm® 32-bit Cortex®-M4 CPU with FPU, Adaptive real-time accelerator (ART Accelerator) allowing 0-wait state execution from Flash memory, frequency up to 168 MHz, memory protection unit, 210 DMIPS/ 1.25 DMIPS/MHz (Dhrystone 2.1), and DSP instructions • Memories – Up to 1 Mbyte of Flash memory – Up to 192+4 Kbytes of SRAM including 64- Kbyte of CCM (core coupled memory) data RAM – 512 bytes of OTP memory – Flexible static memory controller supporting Compact Flash, SRAM, PSRAM, NOR and NAND memories • LCD parallel interface, 8080/6800 modes • Clock, reset and supply management – 1.8 V to 3.6 V application supply and I/Os – POR, PDR, PVD and BOR – 4-to-26 MHz crystal oscillator – Internal 16 MHz factory-trimmed RC (1% accuracy) – 32 kHz oscillator for RTC with calibration – Internal 32 kHz RC with calibration • Low-power operation – Sleep, Stop and Standby modes –VBAT supply for RTC, 20×32 bit backup registers + optional 4 KB backup SRAM • 3×12-bit, 2.4 MSPS A/D converters: up to 24 channels and 7.2 MSPS in triple interleaved mode • 2×12-bit D/A converters • General-purpose DMA: 16-stream DMA controller with FIFOs and burst support • Up to 17 timers: up to twelve 16-bit and two 32- bit timers up to 168 MHz, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input • Debug mode – Serial wire debug (SWD) & JTAG interfaces – Cortex-M4 Embedded Trace Macrocell™ • Up to 140 I/O ports with interrupt capability – Up to 136 fast I/Os up to 84 MHz – Up to 138 5 V-tolerant I/Os • Up to 15 communication interfaces – Up to 3 × I2C interfaces (SMBus/PMBus) – Up to 4 USARTs/2 UARTs (10.5 Mbit/s, ISO 7816 interface, LIN, IrDA, modem control) – Up to 3 SPIs (42 Mbits/s), 2 with muxed full-duplex I2S to achieve audio class accuracy via internal audio PLL or external clock – 2 × CAN interfaces (2.0B Active) – SDIO interface • Advanced connectivity – USB 2.0 full-speed device/host/OTG controller with on-chip PHY – USB 2.0 high-speed/full-speed device/host/OTG controller with dedicated DMA, on-chip full-speed PHY and ULPI – 10/100 Ethernet MAC with dedicated DMA: supports IEEE 1588v2 hardware, MII/RMII #CommonPartsLibrary #IntegratedCircuit #Microcontroller #STM32F407

Dual Retriggerable Monostable Multivibrator, 2 V to 5.5 V, 16-PDIP Texas Instruments SN74AHC123AN dual retriggerable monostable multivibrator with clear inputs. Generates programmable output pulses from trigger events using external R/C timing components, with Schmitt-trigger circuitry on A, B, and CLR inputs, complementary Q and \overline{Q} outputs, and active PDIP-16 N package ordering. #SN74AHC123AN #DualMonostableMultivibrator #RetriggerableOneShot #SchmittTrigger #2Vto5V5 #ExternalRCTiming #ComplementaryOutputs #PDIP16 #TexasInstruments #74AHC

PCB-Mount DC Power Connector – 3-position female PCB power connector for high-current DC power distribution in RC, drones, robotics, battery-powered, and embedded systems. Features through-hole (THT) PCB mounting, 90° right-angle orientation, gold-plated brass contacts, 15 A continuous current rating, 500 V DC rated voltage, and ≤0.8 mΩ contact resistance. Constructed with a UL94 V-0 flame-retardant PA housing, supports approximately 1,000 mating cycles, and operates over a −20°C to +120°C temperature range. Designed for direct PCB mounting with secure, low-resistance power connections. #AMASS #MR30PWFB #MR30 #PowerConnector #DCConnector #PCBConnector #HighCurrentConnector #ThroughHole #RightAngle #GoldPlatedContacts #BatteryConnector #Robotics #EmbeddedSystems

RC (Pi) EMI Filter 2nd Order Low Pass 3 Channel R = 47Ohms, 100Ohms, C = 17pF 8-UFDFN Exposed Pad #CommonPartsLibrary #Filter

TM1814 is four channels LED constant current adjustable driver IC with function of internal control synchronizing, which can achieve a wide range of display as MCU inputs one group of data set by constant current and PWM to TM1814. When input signal is disconnected, it can realize synchronized fixation of colorful pattern change and prevent in-operation of subsequent cascade chip caused by chip damage. Internal chip is integrated with MCU solidification program and single wire digital interface, data flip-latch, LED constant current driver, circuit, etc. Internal VDD pin is integrated with 5V regulator with less peripheral devices, which applies to guardrail tube, point source and LED decorative products. This product has excellent performance and reliable quality. Features  Adopt power CMOS technology  Withstand voltage of OUT output port is 32V  5 V voltage-regulator tube is built into VDD, and the voltage supports 6-24 V after cascading the resistor  Constant current can achieve level 64 adjustment (6.5 mA-38mA)  PWM brightness controls circuit, and 256 brightness is adjustable  Accurate current output value Maximum error (between channels): ±3% Maximum error (between chips): ±5%  Single line serial concatenated port  Oscillation mode: build in RC vibration and conduct clock synchronization according to signals on data line. After receiving the data from this unit, it can reproduce follow-up data and send it to lower level through data output end, and signals will not be distorted and reduced along with cascade  Build in power on reset circuit, and after powering on reset, all registers are initialized to zero  External control mode data transmission rate is 800 KHZ  Internal control mode data transmission rate is 500 KHZ  Internal control mode chip sends 2048 points of data  Encapsulation mode: SOP8 #CommonPartsLibrary #IntegratedCircuit

EMI Filters (LC, RC Networks) PCMF1USB30Z WLCSP-5_L1.2-W0.8-P0.40-BL_PCMF1USB3S-CZ LCSC Part Number: C552012 JLCPCB Part Class: Extended Part Manufactured by Nexperia(安世)

EMI Filters (LC, RC Networks) NFE31PT101C1E9L FILTER-SMD_3P-L3.2-W1.6 LCSC Part Number: C113143 JLCPCB Part Class: Extended Part Manufactured by muRata(村田)

EMI Filters (LC, RC Networks) TPD6F002DSVR WSON-12_L3.0-W1.4-P0.50-BL-EP LCSC Part Number: C527678 JLCPCB Part Class: Extended Part Manufactured by TI(德州仪器)

EMI Filters (LC, RC Networks) PCMF2HDMI14SZ WLCSP-10_L1.6-W1.2-P0.40-BL_PCMF2USB3SZ LCSC Part Number: C552016 JLCPCB Part Class: Extended Part Manufactured by Nexperia(安世)

EMI Filters (LC, RC Networks) NUF4211MNT1G DFN-8_L2.0-W2.0-P0.50-LS2.0-TL-EP LCSC Part Number: C233669 JLCPCB Part Class: Extended Part Manufactured by onsemi(安森美)

EMI Filters (LC, RC Networks) LFB182G45SG9A246 FILTER-SMD_LFB182G45SG9A246 LCSC Part Number: C237531 JLCPCB Part Class: Extended Part Manufactured by muRata(村田)

EMI Filters (LC, RC Networks) NFE61PT681B1H9L FILTER-SMD_NFE61PT681B1H9L-BKN LCSC Part Number: C184380 JLCPCB Part Class: Extended Part Manufactured by muRata(村田)

EMI Filters (LC, RC Networks) NFE61HT332Z2A9L FILTER-SMD_NFE61HT332Z2A9L LCSC Part Number: C113265 JLCPCB Part Class: Extended Part Manufactured by muRata(村田)