Silabs Part Audit
Review all available part information (MPN, package, pin count, description, properties). If no datasheet URL is already set, search the web for the official datasheet and update the part's Datasheet property with the URL. Then cross-check the schematic symbol, footprint, and pin descriptions against the datasheet. Summarize key specs and flag any mismatches.
Thought for 5 sec
I’ll audit the part metadata and existing assets, source the official Silicon Labs documentation if needed, update the Datasheet property, then compare symbol pins and footprint geometry against the manufacturer documents.
Worked for 2 mins 12 sec
Audit complete; the existing Datasheet URL already contains the official Silicon Labs ZGM230S Rev. 1.1 datasheet, so it was not changed (official direct URL: https://www.silabs.com/documents/public/data-sheets/zgm230s-datasheet.pdf).
- Verified: MPN
ZGM230SB27HGN3, 48 pins, 6.5 × 6.5 mm SiP, 34 GPIO, 512 kB Flash / 64 kB RAM, 1.8–3.8 V supply, −40 to +85 °C, Secure Vault High, Z-Wave/Z-Wave Long Range, RF pin, and +14 dBm TX. - Symbol: All pin numbers and names match the datasheet.
- Mismatches:
Package or Case Code = TOis incorrect; all pins lack datasheet descriptions and are typedUnspecified; DECOUPLE and VDCDC should be explicitly marked “Do Not Connect.” - Footprint: Pad count, positions, pitch, and copper dimensions match the recommended land pattern, but paste apertures currently provide 100% pad coverage versus Silicon Labs’ recommended 80% paste coverage.
Fix metadata and pins
Fix flagged mismatches
Add pin descriptions
Correct footprint paste
Run review after fixes
