I’ll inspect the existing part metadata/symbol/footprint, find and set the official datasheet URL if missing, then cross-check pins and package details against the datasheet.
I found the pin mapping matches the datasheet at a functional level; the main issue so far is that the terminal Pin Type/Pin Description fields are not populated.
Completed the WMS08N06TS part review and created Part Review - WMS08N06TS. The datasheet URL was already set, so I did not change it; pinout and footprint are broadly consistent with the Wayon datasheet.
Open items:
Terminal Pin Type and Pin Description fields are missing.
Explicit Package or Case Code: SOP-8L is not set.
Footprint is plausible for SOP-8L, but no Wayon land pattern was found to verify pad geometry directly.
Suggested next steps:
Add pin descriptions/types for Gate, Drain, and Source.
Add the explicit SOP-8L package property.
Re-check footprint if you obtain a manufacturer land-pattern drawing.