Part Audit Review

A

adrian95

Review all available part information (MPN, package, pin count, description, properties). If no datasheet URL is already set, search the web for the official datasheet and update the part's Datasheet property with the URL. Then cross-check the schematic symbol, footprint, and pin descriptions against the datasheet. Summarize key specs and flag any mismatches.

flux

I’ll audit the part metadata, source the official manufacturer documentation if needed, then verify the symbol, footprint, and pin mapping and correct only the Datasheet property if it is missing.
Created a project doc

Part Audit

View Document
TE Connectivity product page: https://www.te.com/en/product-1393310-3.html TE Connectivity datasheet: https://www.te.com/commerce/DocumentDe...

flux

Audit complete. The official TE Connectivity datasheet URL was already set, so no property update was needed; the five-pad/two-locating-hole footprint broadly matches the drawing, but pin descriptions, package metadata, and definitive relay-contact numbering are missing, with a minor 3.5 mm vs. ~3.6 mm pad-land discrepancy.
Full findings: Part Audit.
Fix metadata and review
Clean metadata
Verify pin numbering
Check pad land
Run design review
Sign up to send

Files

Pins

Symbol

Layout

3D View

Name
Pin #
Type
Part Type
Terminal Order
1
1
Unspecified
Terminal
2
2
Unspecified
Terminal
3
3
Unspecified
Terminal
4
4
Unspecified
Terminal
5
5
Unspecified
Terminal

VCF4-1000