Part Verification Report
Review all available part information (MPN, package, pin count, description, properties). If no datasheet URL is already set, search the web for the official datasheet and update the part's Datasheet property with the URL. Then cross-check the schematic symbol, footprint, and pin descriptions against the datasheet. Summarize key specs and flag any mismatches.
Thought for 5 sec
I’ll inspect the part metadata, symbol, footprint, and pins; locate the official TI datasheet if needed; update the Datasheet property; then report verified specs and any mismatches.
Worked for 3 mins 15 sec
Created a project doc
Part Verification Report
Part Verification Report
Reviewed Part
- MPN: TPS62933DRLR
- Manufacturer: Texas Instruments
- Status: Active
- Function: High-efficiency synchronous step-down (buck) converter
- Official product page: https://www.ti.com/product/TPS62933/part-details/TPS62933DRLR
- Official datasheet: https://www.ti.com/lit/ds/symlink/tps62933.pdf
- Stored Datasheet URL:
https://www.ti.com/lit/ds/symlink/tps62933.pdf?ts=1626073394234
The stored Datasheet URL is already present and points to the official TI datasheet, so no Datasheet property update was required.
Key Datasheet Specifications
Symbol and Pin Cross-Check
The symbol exposes eight terminals and the pin names and numbers match the TPS62933 datasheet exactly:
Symbol IssuesReview complete. The official TI datasheet was already linked, and the 8-pin symbol mapping is correct; however, the footprint pads are shorter than TI’s recommended land pattern, package/type metadata is incorrect, and pin types/descriptions are missing. Full findings are in the Part Verification Report; I also filed an internal part-quality report.
Fix metadata and footprint
Verify corrected part
Create part variant
