Pin Function Grouping
Worked for 2 mins 11 sec
Grouped all 11 pins by function within the single symbol:
- Power Path: IN, OUT
- Control: UVLO, OVP, ~SHDN
- Configuration: ILIM, DVDT
- Status: ~FLT
- Ground: RTN, GND, exposed pad
Pin orientations and ordering were also organized, while preserving pin numbers, electrical types, footprint mappings, and assets.
Assign a Terminal Order from 1 to 10, starting with Power. Power should be Terminal Order 1, and Ground should be last, Terminal Order 10. For Orientation, set Power to "Top" and Ground to "Bottom." For the remaining sections/groups, you may decide the Terminal Order and Orientation yourself. For Orientation, distribute them between "Left" and "Right" — don't put everything on one side. Each group/section should have a different orientation.
Thought for 7 sec
I’ll apply a global functional order from 1–10, with the power group first and the ground/return group last. The exposed pad will share the final ground ordering, and the intermediate groups will be split across left and right sides.
Worked for 1 min 10 sec
Updated terminal ordering and orientation:
- Power input: Order 1, Top
- Ground/RTN/EXP: Order 10, Bottom
- Remaining functional groups are distributed across Left and Right
- All 11 terminals and footprint mappings remain intact
Order 8 is unused because the three ground-related terminals share the final Order 10.
Review symbol layout
Verify terminal metadata
Export symbol documentation
