Part Datasheet Audit

flux

I’ll audit the part metadata, locate the official TI datasheet if needed, then cross-check the symbol pins, footprint, and descriptions against the datasheet and correct the Datasheet property.
Created a project doc

Part Datasheet Audit

View Document
Part Datasheet Audit Scope
Audit of TLV76733QWDRBRQ1 metadata, schematic symbol, PCB footprint, and pin descriptions against the official Texas Instruments datasheet.
Current Part Information Key Datasheet Specifications Symbol and Pin Cross-Check
The symbol numbering and names match the fixed-output DRB pinout exactly:
Symbol Issues
  • All terminal Pin Type fields are Unspecified. These should be assigned to improve ERC and semantic quality: OUT = output/power output; IN = power input; EN and SNS = input; GND pins and EP = ground/power; NC pins = no-connect/passive as supported by the property...

flux

Audit complete. The official TI datasheet was already set, and the 9-pin symbol mapping is correct; key issues are the incorrect TO package metadata, unspecified pin types/descriptions, and footprint pads larger than TI’s recommended land pattern.
Full findings: Part Datasheet Audit.
A

adrian95

Correct the package metadata, classify it as an LDO, and add datasheet-backed pin types and descriptions.

flux

I’ll correct the package and regulator classification, then assign datasheet-backed electrical types and functional descriptions to all nine terminals and verify the result.

flux

Corrected the package metadata to 8-pin SON/WSON (3 × 3 mm, TI DRB) and classified the part as a Linear Regulator (LDO). All nine terminals now have datasheet-backed electrical types and concise descriptions; verification confirmed the updates.
Review footprint deviations
Verify 3D model
Update part documentation
Sign up to send

Files

Pins

Symbol

Layout

Preview

OUT
Pin Number
1
NC_1
Pin Number
2
NC_2
Pin Number
7
IN
Pin Number
8
EN
Pin Number
5
GND_2
Pin Number
6
GND_1
Pin Number
4
EP
Pin Number
9
SNS
Pin Number
3

TLV76733QWDRBRQ1