Pin Function Grouping

A

adrian95

can you group together pins by their functions? for example for Power, 3v3, Ground for gnd etc

flux

I’ll inspect the current pin names, then organize them into functional groups such as Power, Ground, Inputs, and Outputs while preserving pin numbers and connectivity.

flux

Grouped all pins by function:
  • Power: V+
  • Ground: V−
  • Channel 1: IN1+, IN1−, OUT1
  • Channel 2: IN2+, IN2−, OUT2
Input ordering is + then −; pin numbers and mappings remain unchanged.
A

adrian95

Assign a Terminal Order from 1 to 10, starting with Power. Power should be Terminal Order 1, and Ground should be last, Terminal Order 10. For Orientation, set Power to "Top" and Ground to "Bottom." For the remaining sections/groups, you may decide the Terminal Order and Orientation yourself. For Orientation, distribute them between "Left" and "Right" — don't put everything on one side. Each group/section should have a different orientation.

flux

Assigned terminal ordering and orientations:
  • 1 — V+: Top
  • 2–4 — Channel 1: Left
  • 5–7 — Channel 2: Right
  • 10 — V− / Ground: Bottom
Orders 8 and 9 remain intentionally unused.
Verify symbol layout
Set pin electrical types
Check against datasheet
Create package model
Sign up to send

Files

Pins

Symbol

Layout

Preview

No files yet