Pin Function Grouping
Worked for 35 sec
Grouped all pins by function:
- Power: V+
- Ground: V−
- Channel 1: IN1+, IN1−, OUT1
- Channel 2: IN2+, IN2−, OUT2
Input ordering is
+ then −; pin numbers and mappings remain unchanged.
Assign a Terminal Order from 1 to 10, starting with Power. Power should be Terminal Order 1, and Ground should be last, Terminal Order 10. For Orientation, set Power to "Top" and Ground to "Bottom." For the remaining sections/groups, you may decide the Terminal Order and Orientation yourself. For Orientation, distribute them between "Left" and "Right" — don't put everything on one side. Each group/section should have a different orientation.
Worked for 17 sec
Assigned terminal ordering and orientations:
- 1 — V+: Top
- 2–4 — Channel 1: Left
- 5–7 — Channel 2: Right
- 10 — V− / Ground: Bottom
Orders 8 and 9 remain intentionally unused.
Verify symbol layout
Set pin electrical types
Check against datasheet
Create package model
Name
Pin #
Type
Part Type
Pin Group
Pin Orientation
Section
Terminal Order
OUT1
1
Unspecified
Terminal
Output
Left
Channel 1
4
IN1-
2
Unspecified
Terminal
Inputs
Left
Channel 1
3
IN1+
3
Unspecified
Terminal
Inputs
Left
Channel 1
2
V-
4
Unspecified
Terminal
Ground
Bottom
Ground
10
IN2+
5
Unspecified
Terminal
Inputs
Right
Channel 2
5
IN2-
6
Unspecified
Terminal
Inputs
Right
Channel 2
6
OUT2
7
Unspecified
Terminal
Output
Right
Channel 2
7
V+
8
Unspecified
Terminal
Power
Top
Power
1
TLV1812DR
