Part Datasheet Audit

A

adrian95

Review all available part information (MPN, package, pin count, description, properties). If no datasheet URL is already set, search the web for the official datasheet and update the part's Datasheet property with the URL. Then cross-check the schematic symbol, footprint, and pin descriptions against the datasheet. Summarize key specs and flag any mismatches.

flux

I’ll audit the part metadata, locate the official Hirose documentation if needed, update the Datasheet property, then verify the symbol, footprint, and pin descriptions against it.

flux

Reviewed the part and set the official Hirose TF31 catalog as the Datasheet URL.
  • Verified: 22 contacts, 0.5 mm pitch; footprint signal lands are 0.3 × 1.3 mm, correctly pitched, with mounting-pad geometry matching the 12.5/16.3 mm dimensions.
  • Key specs: bottom-contact front-flip ZIF FPC/FFC receptacle, 0.3 mm cable, 50 V, 0.5 A/contact, −40 to +105 °C, 50 mΩ max, 20 mating cycles, 3,000/reel.
  • Mismatches: MPN uses underscores instead of official parentheses; description is only “HRS”; Part Type, package/mount metadata, and all pin descriptions are missing. The 22 passive pin numbers and symbol-to-pad mapping are otherwise correct.
Fix and fully validate
Fix part metadata
Add pin descriptions
Verify 3D alignment
Rerun part review
Sign up to send

Files

Pins

Symbol

Layout

3D View

No files yet