Part Datasheet Audit
Worked for 7 mins 29 sec
Audit completed against the official TI TCAN3413 datasheet and DRB0008B package drawing.
- Corrected pin 5 from SHDNVIO to VIO, assigned electrical pin types, and added datasheet-backed descriptions to all 9 terminals.
- Datasheet URL was already populated, so it was preserved; however, it is a non-TI mirror. Official datasheet: https://www.ti.com/lit/ds/symlink/tcan3413.pdf
- Confirmed: 3.0–3.6 V VCC, 1.7–3.6 V VIO, CAN FD up to 8 Mbps, ±58 V bus-fault protection, –40°C to +125°C, and 8-pin 3 × 3 mm VSON plus exposed pad.
Flagged mismatches
- The project description incorrectly states a 4.5–5.5 V supply; TCAN3413 VCC is 3.0–3.6 V.
- Footprint perimeter pads are about 0.35 × 0.85 mm, versus TI’s example land pads of about 0.30 × 0.60 mm.
- The exposed-pad copper is slightly oversized, and the footprint lacks TI’s thermal-via guidance.
Package or Case Codeis missing, and the stored datasheet link is not manufacturer-hosted.- Footprint mapping is correct, including EP → pad 9, but the footprint should be rebuilt from the TI DRB0008B drawing before manufacturing qualification.
Provide a concise direct to the point best description for this part based from the datasheet. i don't need a very long but useless description.
Thought for 18 sec
3.3-V CAN FD transceiver with 1.7–3.6 V VIO, standby mode, up to 8 Mbps operation, and ±58 V bus-fault protection in a 3 × 3 mm VSON-8 package.
Update description and metadata
Apply concise description
Use official datasheet
Correct package metadata
Fix footprint geometry
