Pin Grouping Functions

A

adrian95

Separate GND from Power Group, make a Ground Group

flux

Moved EPAD/GND out of Power into a separate Ground section and pin group.
A

adrian95

Assign a Terminal Order from 1 to 10, starting with Power. Power should be Terminal Order 1, and Ground should be last, Terminal Order 10. For Orientation, set Power to "Top" and Ground to "Bottom." For the remaining sections/groups, you may decide the Terminal Order and Orientation yourself. For Orientation, distribute them between "Left" and "Right" — don't put everything on one side. Each group/section should have a different orientation.

flux

I’ll normalize the symbol into 10 ordered functional groups: Power = 1 through Ground = 10, with Power on top, Ground on bottom, and the other groups alternating left/right.

flux

Assigned and verified the 10 functional groups:
  1. Power — Top
  2. GPIOA — Left
  3. GPIOB — Right
  4. GPIOC — Left
  5. LSE — Right
  6. HSE — Left
  7. System — Right
  8. Radio — Left
  9. Regulator — Right
  10. Ground — Bottom
Verify symbol visually
Validate pin mapping
Set electrical types
Review all metadata
Sign up to send

Files

Pins

Symbol

Layout

3D View

STM32WBA52CGU6