STM32 Pin Layout Audit
Check this schematic component against the datasheet for [MPN] and assign the correct pin orientation, section, and terminal order without changing, replacing, renumbering, or remapping any pins. Remove the Pin Group property from all pins if it exists. Place Power pins first and Ground pins last. Within each section, distribute the pins as evenly as possible between the left and right sides; for example, split 10 pins as 5/5 and 11 pins as 5/6 or 6/5. If a section contains only one pin, leave it on the most appropriate side. Keep the symbol compact, balanced, and visually symmetrical. If a pin function is unclear, assign Unclear / Check datasheet, then apply all changes directly to the schematic component.
Thought for 12 sec
I’ll apply this to the current STM32H573VIT3Q part, preserving every existing pin name and number. I’ll classify pins into balanced functional sections, set orientation and terminal order, remove Pin Group everywhere, then verify the symbol properties.
Worked for 3 mins 41 sec
Updated all 100 pins with datasheet-based Section, Pin Orientation, and unique Terminal Order values; removed Pin Group from every pin. Pin names/numbers were preserved exactly, Power is first, Ground last, and the symbol is balanced 50 left / 50 right across 10 functional sections.
Fix metadata and pins
Correct pin mappings
Add pin descriptions
Fix footprint scaling
Run part review
