Part Audit Review

Review all available part information (MPN, package, pin count, description, properties). If no datasheet URL is already set, search the web for the official datasheet and update the part's Datasheet property with the URL. Then cross-check the schematic symbol, footprint, and pin descriptions against the datasheet. Summarize key specs and flag any mismatches.

Thought for 6 sec

flux

I’ll audit the part metadata, locate the official STM32G0B1CBT3 datasheet if needed, update its Datasheet property, then verify symbol pins and footprint geometry against the manufacturer documentation.

Worked for 4 mins 35 sec

Created a project doc

Part Audit

View Document

Part Audit Scope

Audit of STM32G0B1CBT3 metadata, official datasheet, 48-pin schematic symbol, LQFP48 footprint, and terminal descriptions/types.

Authoritative source

Manufacturer: STMicroelectronics
Official datasheet: STM32G0B1xB/xC/xE, DS13560 Rev. 6 (February 2026)
The existing Datasheet URL property already points to this official document, so no URL update was required.

Correct identity and key specifications Metadata review Schematic symbol review Pin numbering and names

All 48 current terminal numbers and names match the official LQFP48 pinout:

1 PC13, 2 PC14-OSC32_IN, 3 PC15-OSC32_OUT, 4 VBAT, 5 VREF+, 6 VDD/VDDA, 7 VSS/VSSA, 8 PF0-OSC_IN, 9 PF1-OSC_OUT, `10 PF2-NR...

flux

Audit complete. The existing Datasheet URL is already the official ST document, and all 48 symbol pin names/numbers match; key issues are incorrect TO package metadata, incorrect Logic/AND classification, missing pin types/descriptions, and footprint pads longer than ST’s example.

Full findings: Part Audit. An internal part-quality report was also filed for review.

Correct part metadata

Match ST footprint

Review pad-length tradeoff

Create bring-up plan

Files

Pins

Symbol

Layout

3D View

STM32G0B1CBT3