Symbol Pin Audit


Check this schematic component against the datasheet for [MPN] and assign the correct pin orientation, section, and terminal order without changing, replacing, renumbering, or remapping any pins. Remove the Pin Group property from all pins if it exists. Place Power pins first and Ground pins last. Within each section, distribute the pins as evenly as possible between the left and right sides; for example, split 10 pins as 5/5 and 11 pins as 5/6 or 6/5. If a section contains only one pin, leave it on the most appropriate side. Keep the symbol compact, balanced, and visually symmetrical. If a pin function is unclear, assign Unclear / Check datasheet, then apply all changes directly to the schematic component.
I’ll apply this to the current ST25R200-BMET symbol using the verified datasheet pin functions, preserving every pin number and mapping. I’ll remove Pin Group metadata, assign sections/orientations/order, then verify the resulting symbol structure.
Created a project doc

Part Audit

View Document

Part Audit Identification and metadata
  • MPN: ST25R200-BMET
  • Manufacturer: STMicroelectronics
  • Description: NFC/HF RFID reader/writer IC supporting NFC-A/ISO14443A, NFC-B/ISO14443B, NFC-V/ISO15693, NFC Forum tag types, and SPI host communication.
  • Package: UFQFPN24, 4 × 4 mm, 0.5 mm pitch, exposed pad (25 electrical/footprint terminals including the exposed pad).
  • Lifecycle: Active / volume production; ST longevity information indicates availability until 01/2035.
  • Official datasheet: https://www.st.com/resource/en/datasheet/st25r200.pdf
  • Datasheet property: Updated and verified.
Metadata gaps
  • Package is not exposed as a dedicated part-level property.
  • Operating voltage and operating temperature are not recorded as part-level properties.
Updated the ST25R200-BMET symbol: all 25 pins retain their original names, numbers, and mappings; Pin Group was removed; balanced Power, Digital, RF/Analog, Crystal, and Ground sections now have verified orientations and terminal order. The official ST datasheet URL is set, and the detailed findings—including the mismatched footprint land pattern—are in Part Audit.
Fix footprint and metadata
Review exposed-pad stencil
Validate updated part

Part Audit
Identification and metadata
  • MPN: ST25R200-BMET
  • Manufacturer: STMicroelectronics
  • Description: NFC/HF RFID reader/writer IC supporting NFC-A/ISO14443A, NFC-B/ISO14443B, NFC-V/ISO15693, NFC Forum tag types, and SPI host communication.
  • Package: UFQFPN24, 4 × 4 mm, 0.5 mm pitch, exposed pad (25 electrical/footprint terminals including the exposed pad).
  • Lifecycle: Active / volume production; ST longevity information indicates availability until 01/2035.
  • Official datasheet: https://www.st.com/resource/en/datasheet/st25r200.pdf
  • Datasheet property: Updated and verified.
Metadata gaps
  • Package is not exposed as a dedicated part-level property.
  • Operating voltage and operating temperature are not recorded as part-level properties.
Key specifications
  • RF carrier: 13.56 MHz
  • NFC-A and NFC-B: 106 kbit/s
  • NFC-V: up to 53 kbit/s
  • SPI: up to 10 Mbit/s
  • FIFO: 256 bytes
  • Crystal: 27.12 MHz
  • VDD and VDD_IO: 2.7–5.5 V
  • Ambient temperature: −40°C to +85°C
  • Absolute maximum VDD/VDD_IO: 6 V
  • HBM ESD: 2 kV
Pin audit
All 25 pin-number/name mappings match ST datasheet Table 1. No pins are missing, duplicated, renumbered, or mapped to the wrong footprint pad.
The original symbol lacked pin descriptions and had Pin Type = Unspecified for all terminals. Datasheet electrical classifications include digital output, tri-state output, digital input, analog input/output, supply output, power, and ground types. Important functional notes include:
  • GND_DR must connect as shortly as possible to exposed-pad VSS.
  • VSS is the exposed die pad and substrate ground.
  • BSS is the active-low SPI enable.
  • TAD1/TAD2 are test pins and may be routed to test points or left unconnected when unused.
  • VDD_D, VDD_AM, VDD_DR, and VDD_A are regulated domain outputs, not ordinary external supply inputs.
Symbol organization applied
No pin names, numbers, mappings, or footprint assignments were changed. Pin Group was removed from every pin. The parametric symbol now uses globally unique Terminal Order values 1–25 and these balanced sections:
  1. Power — 6 pins, split 3 left / 3 right
  2. Digital Interface — 6 pins, split 3 left / 3 right
  3. RF / Analog — 7 pins, split 3 left / 4 right
  4. Crystal — 2 pins, split 1 left / 1 right
  5. Ground — 4 pins, split 2 left / 2 right
Readback confirmed all 25 terminals remain present exactly once and all requested Section, Pin Orientation, and Terminal Order properties are applied.
Footprint audit
Datasheet package reference: UFQFPN24, 4.00 × 4.00 mm body, 0.50 mm pitch, terminal width 0.18–0.30 mm, exposed-pad package dimension 2.60–2.85 mm. ST’s footprint example uses approximately 0.40 × 0.55 mm peripheral lands, a 2.75 × 2.75 mm exposed land, and a 4.30 mm outer land span.

Table


FeatureCurrent footprintST exampleResult
Peripheral pad0.254 × 0.8128 mm≈0.40 × 0.55 mmMismatch: narrower and longer
Pitch0.50038 mm0.500 mmNegligible conversion artifact
Outer copper span4.6228 mm4.30 mmOversized by 0.3228 mm
Inner opposing-pad gap2.9972 mm≈3.20 mmToo small by 0.2028 mm
Exposed pad2.8448 × 2.8448 mm2.75 × 2.75 mmOversized by 0.0948 mm per axis
Fab body outline4.0132 × 4.0132 mm4.00 × 4.00 mmMinor conversion artifact
The exposed-pad paste is a single solid aperture. The datasheet does not provide enough stencil detail to validate paste segmentation, so assembly-house stencil guidance should be used.
Main flags
  1. Footprint land pattern does not match ST’s recommended footprint example. Correct before production use.
  2. Pin descriptions and electrical pin types remain incomplete metadata. Physical pin mapping is correct, but ERC and library clarity are reduced until these fields are populated.
  3. Dedicated package, voltage, and temperature properties are absent.
Evidence: ST25R200 datasheet DS13658 Rev. 2, Table 1, Tables 89–90, Table 96, and Figure 24.
  • Identification and metadata

  • Metadata gaps

  • Key specifications

  • Pin audit

  • Symbol organization applied

  • Footprint audit

  • Main flags