Samtec Part Review

Thought for 7 sec

I’ll review the current part metadata, find and set an official datasheet URL if missing, then compare the symbol, footprint, and pin descriptions against the datasheet.

Worked for 4 mins 56 sec

flux

I found the official Samtec SSQ catalog and product documents, and the part now resolves as SSQ-119-03-T-D with the official catalog URL set on the project. I’m checking the actual footprint against Samtec’s footprint/print PDFs now.

Worked for 7 mins 45 sec

Created a project doc

Part Datasheet Review — Samtec SSQ-119-03-T-D

View Document

Date: 2026-07-17 Reviewed available part metadata, schematic symbol terminals, PCB footprint geometry, and official Samtec documentation for...

flux

Completed the review and set the Datasheet URL to the official Samtec SSQ catalog PDF. I created the detailed findings in Part Datasheet Review — Samtec SSQ-119-03-T-D.

Open items:

Description metadata likely needs correction: it mentions gold plating and 8.08 mm stack height, while the reviewed SSQ-119-03-T-D docs indicate matte tin and 8.51 mm REF body height.
Terminal pin descriptions are missing, though the 38-pin symbol and footprint geometry otherwise match the Samtec documentation.

Suggested next steps:

Ask me to update the description metadata to match the datasheet.
Ask me to add clear Pin Description properties for terminals 01–38.
Ask me to run a focused 3D model-to-footprint alignment check.

Fix metadata and pins

Update description metadata

Add pin descriptions

Check 3D alignment

Run quality checks

Files

Pins

Symbol

Layout

3D View

SSQ-119-03-T-D