Part Datasheet Audit
Review all available part information (MPN, package, pin count, description, properties). If no datasheet URL is already set, search the web for the official datasheet and update the part's Datasheet property with the URL. Then cross-check the schematic symbol, footprint, and pin descriptions against the datasheet. Summarize key specs and flag any mismatches.
Thought for 8 sec
I’ll audit the part metadata, source the official Bourns datasheet if needed, update the Datasheet property, then verify the symbol, footprint, and terminal descriptions against it.
Worked for 3 mins 16 sec
Audit complete. The existing Datasheet URL already points to the official Bourns SRN6028C datasheet, so no update was required; the 2-pad footprint matches the recommended 6.5 × 6.5 mm land pattern with a 2.5 mm center gap.
Key specs: 3.9 µH ±20%, Q 15 at 100 kHz, 54 MHz SRF, 28 mΩ DCR, 3.3 A Irms, 3.9 A Isat, −40 to +125 °C, semi-shielded 6.0 × 6.0 × 2.6 mm SMD package. Flagged metadata/symbol issues:
Mount is incorrectly set to Wire rather than SMD, Inductance is blank, both terminal types are Unspecified, pin descriptions are absent, and useful ratings such as tolerance, DCR, Irms, Isat, and temperature range are missing; the description and MPN/pin count are correct.Fix metadata and review
Fix part metadata
Update pin details
Run ERC/DRC
Check BOM fields
