Part Audit Review

A

adrian95

Review all available part information (MPN, package, pin count, description, properties). If no datasheet URL is already set, search the web for the official datasheet and update the part's Datasheet property with the URL. Then cross-check the schematic symbol, footprint, and pin descriptions against the datasheet. Summarize key specs and flag any mismatches.

flux

I’ll audit the part metadata, locate and attach the official datasheet if needed, then verify the symbol, footprint, and pin descriptions against it and report any mismatches.
Created a project doc

SPD5118-Y1B000NCG8 Part Information Audit

View Document
Reviewed project metadata, published library metadata, the nine-terminal schematic symbol, the default footprint asset, and the attached SPD...

flux

Audit complete. Pin numbering and the 9-contact DFN footprint arrangement are substantially correct, but the package is incorrectly labeled Module, the AND logic classification and 0°C to +70°C range are wrong, and all pins lack electrical types and datasheet-derived descriptions; the existing datasheet URL was already populated, so I left it unchanged.
Full findings: SPD5118-Y1B000NCG8 Part Information Audit
Fix metadata and pins
Update footprint notes
Run ERC DRC
Rename ground pins
Sign up to send

Files

Pins

Symbol

Layout

3D View

LSCL
Pin Number
4
HSDA
Pin Number
2
LSDA
Pin Number
1
HSCL
Pin Number
3
Name
Pin #
Type
Section
Pin Group
Orientation
Order
Sub-symbol
LSDA
1
Unspecified
HSDA
2
Unspecified
HSCL
3
Unspecified
LSCL
4
Unspecified
VDDSPD
5
Unspecified
GND_1
6
Unspecified
VIO
7
Unspecified
HSA
8
Unspecified
GND_2
9
Unspecified

SPD5118-Y1B000NCG8