Datasheet Audit
Review all available part information (MPN, package, pin count, description, properties). If no datasheet URL is already set, search the web for the official datasheet and update the part's Datasheet property with the URL. Then cross-check the schematic symbol, footprint, and pin descriptions against the datasheet. Summarize key specs and flag any mismatches.
Thought for 9 sec
I’ll audit the part metadata, source the official TI datasheet if needed, update the Datasheet property, then verify the symbol, footprint, and pin descriptions against it.
Worked for 5 mins 3 sec
The official TI datasheet is now set. I’m doing a final read-back of the symbol properties and footprint geometry before closing the audit.
Thought for 34 sec
Updated the Datasheet property to the official Texas Instruments datasheet. The 6-pin DCK/SC70 symbol pinout and footprint numbering match TI: 1 VCCA, 2 GND, 3 A, 4 B, 5 DIR, 6 VCCB; no exposed pad, with 0.65 mm pitch and correct pin-1 orientation.
Key specs: independent 1.1–5.5 V supplies, −40°C to +125°C operation, up to 420 Mbps, 32 mA drive at 5 V, A→B when DIR is high, and B→A when low. Flagged issues: all pin types are unspecified, pin descriptions and explicit package property are missing, symbol rendering appears defective, package metadata incorrectly indicates a ball package/zero size, and footprint pads are 0.4 × 1.2 mm versus TI’s 0.4 × 0.9 mm example land pattern.
Fix metadata issues
Adjust footprint pads
File quality report
Run final review
