Pin Grouping by Function

flux

Updated all 20 pins so each Section value now exactly matches its Pin Group value.
A

adrian95

Assign a Terminal Order from 1 to 10, starting with Power. Power should be Terminal Order 1, and Ground should be last, Terminal Order 10. For Orientation, set Power to "Top" and Ground to "Bottom." For the remaining sections/groups, you may decide the Terminal Order and Orientation yourself. For Orientation, distribute them between "Left" and "Right" — don't put everything on one side. Each group/section should have a different orientation.

flux

There are five groups: Power, Ground, Control, Data Inputs, Data Outputs. The orientation constraint is impossible as written: after Power=Top and Ground=Bottom, three groups remain but only Left and Right are allowed, so all three cannot have different orientations.
Should I use:
  • Control: Left
  • Data Inputs: Left
  • Data Outputs: Right
and assign terminal orders across the 20 individual pins while keeping Power first and Ground last?
A

adrian95

ok

flux

Applied the approved ordering and orientation:
  • Power: order 1, Top
  • Control: orders 2–3, Left
  • Data Inputs: orders 2–9, Left
  • Data Outputs: orders 2–9, Right
  • Ground: order 10, Bottom
Sign up to send

Files

Pins

Symbol

Layout

3D View

No files yet