Pin Grouping Review
Assign a Terminal Order from 1 to 10, starting with Power. Power should be Terminal Order 1, and Ground should be last, Terminal Order 10. For Orientation, set Power to "Top" and Ground to "Bottom." For the remaining sections/groups, you may decide the Terminal Order and Orientation yourself. For Orientation, distribute them between "Left" and "Right" — don't put everything on one side. Each group/section should have a different orientation.
Thought for 14 sec
I’ll apply Terminal Order at the functional-group level: Power = 1, Ground = 10, with the remaining groups ordered between them and alternated across Left and Right. Pins within the same group will share that group’s order and orientation.
Worked for 1 min 43 sec
Assigned and verified group-level ordering and orientation:
- 1 — Power — Top
- 2 — Contactless — Left
- 3 — I2C Target — Right
- 4 — ISO7816 / I2C Controller — Left
- 5 — Power Control — Right
- 6 — Not Connected — Left
- 10 — Ground — Bottom
All 21 pins remain uniquely assigned, with each Section matching its Pin Group.
Fix names and metadata
Fix I2C names
Add pin descriptions
Complete part metadata
Run symbol review
