RP2350 Part Audit
Check this schematic component against the datasheet for [MPN] and assign the correct pin orientation, section, and terminal order without changing, replacing, renumbering, or remapping any pins. Remove the Pin Group property from all pins if it exists. Place Power pins first and Ground pins last. Within each section, distribute the pins as evenly as possible between the left and right sides; for example, split 10 pins as 5/5 and 11 pins as 5/6 or 6/5. If a section contains only one pin, leave it on the most appropriate side. Keep the symbol compact, balanced, and visually symmetrical. If a pin function is unclear, assign Unclear / Check datasheet, then apply all changes directly to the schematic component.
Thought for 9 sec
I’ll use the stored MPN SC1509-A4 and the official RP2350A datasheet to classify every existing pin, then update only orientation, section, terminal order, and remove Pin Group—without changing pin identities or mapping.
Worked for 3 mins 27 sec
The pin organization has been applied. I’m now verifying all 61 terminals, ordering, side balance, and that no identities or mappings changed.
Thought for 34 sec
Updated and verified all 61 terminals:
- Assigned eight functional sections, with Power first and Ground last.
- Balanced each section left/right; overall split is 30/31.
- Assigned unique terminal orders 1–61.
- Removed Pin Group from every terminal.
- Preserved all pin names, numbers, types, and footprint mappings unchanged.
No pins required the Unclear / Check datasheet classification.
Fix pins and model
Verify symbol layout
Run part audit
Export review report
