Pin Grouping By Function
Worked for 13 sec
Moved AGND, PGND_1, and PGND_2 from Power into a separate Ground group.
Assign a Terminal Order from 1 to 10, starting with Power. Power should be Terminal Order 1, and Ground should be last, Terminal Order 10. For Orientation, set Power to "Top" and Ground to "Bottom." For the remaining sections/groups, you may decide the Terminal Order and Orientation yourself. For Orientation, distribute them between "Left" and "Right" — don't put everything on one side. Each group/section should have a different orientation.
Thought for 7 sec
There’s a conflict: the symbol has more functional groups than the four available orientations, so every group cannot have a unique orientation while the remaining groups are limited to Left/Right.
Should I apply one orientation per section, with Power = Top, Ground = Bottom, and alternate the remaining groups between Left and Right, while assigning group orders 1–10?
Worked for 19 sec
Assigned functional group orders 1–10 with section orientations:
- Power: Top, orders 1–2
- Power Stage: Left, orders 3–4
- Control: Right, orders 5–6
- Digital Interface: Left, orders 7–8
- Ground: Bottom, orders 9–10
Inspect symbol layout
Set pin electrical types
Review package mapping
