Check this schematic component against the datasheet for [MPN].
Compare all pins with the datasheet and assign for each pin: pin orientation, section, and terminal order.
Important:
Do not replace pins, do not change pin numbers, and do not remap pins.
Only assign the correct properties: orientation, section, and terminal order.
Power pins must be first in the terminal order.
Ground / GND pins must be last.
Place all other pins between them into sections according to the datasheet: Input, Output, Control, Analog, Digital, Interface, RF, NC, Unclear / Check datasheet.
If one section has many pins, do not place all pins on one side of the symbol. Distribute them logically on both sides of the symbol: Left and Right, so the schematic symbol is balanced and easy to read.
If a pin function is unclear, do not guess; assign section Unclear / Check datasheet.
Terminal order must be logical for the schematic and match the datasheet.
Apply these assignments directly to the schematic component.
Completed the RK806S-5 review and applied the requested pin organization properties without changing pin numbers, names, or mappings. I also created the full review report here: RK806S-5 Part Review.
Open items:
Package metadata is still generic (QFN); datasheet is more specific: QFN68 / QFN-68(7x7).
Pin Type and Pin Description properties remain incomplete because the requested edit was limited to orientation, section, and terminal order.
Suggested next steps:
Update Package or Case Code to QFN-68(7x7).
Populate Pin Type and Pin Description from the datasheet.
Check the exposed-pad paste/land pattern against any manufacturer-recommended PCB land pattern.