RE200B Part Review
Worked for 2 mins 55 sec
Created a project doc
RE200B Part Review
Date: 2026-07-16 Reviewed available part information for the published part project RE200B, including MPN, manufacturer/package metadata, pi...
I created the review report and captured the datasheet/spec cross-check there. I’m doing one final metadata sanity check before wrapping up.
Thought for 1 min 4 sec
Completed the RE200B part review and wrote the detailed findings to RE200B Part Review. The pinout and TO-5 footprint geometry match the datasheet; flagged gaps are mostly metadata quality: missing pin descriptions, unspecified pin types, missing package property, and manufacturer normalization.
Open items:
- No current official Nicera-hosted RE200B PDF was found; the existing datasheet URL remains set.
- Suggested metadata cleanup was not applied yet.
Suggested next steps:
- Add
Package or Case Code: TO-5. - Add pin descriptions and electrical pin types.
- Normalize manufacturer metadata to Nicera / Nippon Ceramic.
Fix metadata and review
Fix metadata gaps
Validate footprint
Run part review
Update review report
