Part Audit Review

C

cherepanyadima

Review all available part information (MPN, package, pin count, description, properties). If no datasheet URL is already set, search the web for the official datasheet and update the part's Datasheet property with the URL. Then cross-check the schematic symbol, footprint, and pin descriptions against the datasheet. Summarize key specs and flag any mismatches.

flux

I’ll audit the part metadata, locate the official RAK19010 documentation if needed, update the Datasheet property, then cross-check the 12-pin symbol and footprint against the manufacturer information.
Created a project doc

Part Information Audit

View Document
Part Information Audit Scope
Audit of the RAK19010-X-WB-N part metadata, schematic terminals, footprint pads, mechanical outline, and manufacturer documentation.
Metadata found Manufacturer information reviewed
Official product: RAK19010 WisBlock Base Board with Power Slot. The board is 30 x 60 mm and provides one WisBlock Core slot, one IO slot, four Sensor slots, and a separate Power Slot architecture. The base board requires a compatible Power Slot module and exposes BOOT, GPIO, ADC, I2C, and UART functions through 2.54 mm extension headers.
Official sources:

flux

Audit complete. The official datasheet URL was already set, so no property update was needed; key flags are an incorrect Integrated Circuits classification, missing manufacturer/package/description metadata, unverified exact header and mounting-hole geometry, and potentially imprecise TX1/RX1 pin types.
Full findings: Part Information Audit
Fix metadata and types
Verify mechanical footprint
Add pin descriptions
Sign up to send

Files

Pins

Symbol

Layout

Preview

RX1
Pin Number
4
TX1
Pin Number
3
IO1
Pin Number
6
AIN1
Pin Number
5
SCL
Pin Number
11
BOOT
Pin Number
1
IO2
Pin Number
7
SDA
Pin Number
12
VDD
Pin Number
9
GND
Pin Number
10
GND
Pin Number
2
VBAT
Pin Number
8
Part Information Audit
Scope
Audit of the RAK19010-X-WB-N part metadata, schematic terminals, footprint pads, mechanical outline, and manufacturer documentation.
Metadata found

Table

FieldCurrent valueAssessment
MPNRAK19010-X-WB-NMatches the requested orderable part identifier.
ManufacturerNot set as a dedicated propertyShould be RAKwireless Technology Limited.
Part TypeIntegrated CircuitsMismatch: this is a WisBlock base board/module, not an IC.
MountBaseBroadly descriptive, but not a conventional package/mount classification.
PackageNot setMissing. A descriptive value such as RAK19010 60 x 30 mm base-board module would be clearer.
Pin count12Matches the twelve numbered schematic terminals and twelve numbered footprint pads.
DescriptionNot set as a dedicated propertyMissing.
Datasheethttps://docs.rakwireless.com/product-categories/wisblock/rak19010/datasheet/Already present and is the official RAKwireless datasheet page; no update was required.
Manufacturer information reviewed
Official product: RAK19010 WisBlock Base Board with Power Slot. The board is 30 x 60 mm and provides one WisBlock Core slot, one IO slot, four Sensor slots, and a separate Power Slot architecture. The base board requires a compatible Power Slot module and exposes BOOT, GPIO, ADC, I2C, and UART functions through 2.54 mm extension headers.
Official sources:
Symbol and pin audit
The symbol contains exactly twelve terminals, numbered 1 through 12:

Table

PinSymbol nameElectrical typeCross-check result
1BOOTInputFunction is consistent with the documented BOOT extension signal. Exact numbered assignment was not exposed by the accessible official text.
2GNDPower InPlausible; exact numbered assignment remains unverified.
3TX1Bi-DirectionalUART function is documented. Output would usually be a more precise symbol type if TX1 is defined from the Core's perspective. Exact numbered assignment remains unverified.
4RX1Bi-DirectionalUART function is documented. Input would usually be a more precise symbol type if RX1 is defined from the Core's perspective. Exact numbered assignment remains unverified.
5AIN1InputConsistent with the documented ADC extension function. Exact numbered assignment remains unverified.
6IO1Bi-DirectionalConsistent with documented GPIO access. Exact numbered assignment remains unverified.
7IO2Bi-DirectionalConsistent with documented GPIO access; manufacturer documentation also describes IO2 as controlling the switched 3V3_S rail. Exact numbered assignment remains unverified.
8VBATPower InConsistent with the battery-voltage rail supplied by the Power Slot. Exact numbered assignment remains unverified.
9VDDPower OutLikely represents the 3.3 V rail, but VDD is less explicit than 3V3; exact numbered assignment and direction remain unverified.
10GNDPower InPlausible; exact numbered assignment remains unverified.
11SCLBi-DirectionalConsistent with I2C; open-drain/bi-directional is appropriate. Exact numbered assignment remains unverified.
12SDABi-DirectionalConsistent with I2C; open-drain/bi-directional is appropriate. Exact numbered assignment remains unverified.
No per-pin description text is stored beyond the terminal names and electrical types.
Footprint audit
  • Twelve numbered through-hole pads exist and map one-to-one to symbol pins 1 through 12.
  • Pad pitch is 2.54 mm.
  • Pad 1 is rectangular and the footprint includes a PIN 1 BOOT marker.
  • The nominal outline is 60 x 30 mm, matching manufacturer dimensions.
  • Four 2.7 mm non-plated mounting holes are present.
  • A STEP model is attached at unit scale.
Footprint concerns
  1. Accessible manufacturer text describes three 2.54 mm extension headers, while this footprint consolidates the twelve signals into an 8-pad row plus a 4-pad row. The exact pad grouping, coordinates, orientation, and pin numbering could not be verified from the accessible text-only manufacturer pages. Treat the footprint geometry as unverified until checked against an official dimensioned drawing, PCB source, or clear top/bottom board photograph.
  2. The fourth mounting hole is at (28.0, -12.75) mm, unlike the other three near (+/-26, +/-11) mm. This asymmetry may be intentional around the Power Slot, but it also needs confirmation against an official mechanical drawing or the STEP model.
  3. The courtyard is 60.6 x 30.6 mm, only 0.3 mm beyond the nominal board edge on each side. For a module/base-board footprint, additional assembly and connector clearance may be needed depending on the intended host-board use.
  • Set Manufacturer to RAKwireless Technology Limited.
  • Change Part Type from Integrated Circuits to a board/module category if available.
  • Add a dedicated description: RAK19010 WisBlock Base Board with Power Slot, 60 x 30 mm, 1 Core slot, 1 IO slot, 4 Sensor slots, 12-pin 2.54 mm extension interface.
  • Add a package value describing the 60 x 30 mm base-board module.
  • Add terminal descriptions and refine TX1/RX1 electrical types after the exact pinout perspective is confirmed.
  • Do not publish or use the footprint for mating/mechanical-critical work until the extension-header and mounting-hole coordinates are confirmed from authoritative geometry.
Overall assessment
The part is internally consistent at the logical mapping level: twelve numbered symbol terminals map to twelve numbered footprint pads, and the signal names cover the manufacturer-documented BOOT, UART, ADC, GPIO, I2C, ground, 3.3 V, and battery functions. The main issues are incomplete metadata, an incorrect Part Type classification, missing pin descriptions, and insufficient authoritative evidence for the exact footprint geometry and numbered pin assignment.

  • Scope

  • Metadata found

  • Manufacturer information reviewed

  • Symbol and pin audit

  • Footprint audit

  • Footprint concerns

  • Recommended corrections

  • Overall assessment