Part Audit Review

Review all available part information (MPN, package, pin count, description, properties). If no datasheet URL is already set, search the web for the official datasheet and update the part's Datasheet property with the URL. Then cross-check the schematic symbol, footprint, and pin descriptions against the datasheet. Summarize key specs and flag any mismatches.

Thought for 13 sec

flux

I’ll audit the part metadata, source the official datasheet if needed, update the Datasheet property, then verify the symbol, footprint, and pin descriptions against the manufacturer documentation.

Worked for 4 mins 52 sec

flux

The official datasheet was already linked, so no metadata edit was required. I found symbol-detail gaps and potentially significant footprint mounting-hole discrepancies; I’m now independently verifying the persisted part data and audit report.

Worked for 1 min 15 sec

flux

Audit complete. The Datasheet property already contained the official Bourns PTV09-series datasheet, so no update was needed.

Key issues:

Symbol uses five generic terminals; pin 2 is not identified as the wiper and pins lack descriptions/types.
Footprint mounting-hole spacing is 8.8 mm vs. 10.6 mm specified.
Mounting drills are 2.973 mm vs. 2.2–2.4 mm specified.
Footprint asset name incorrectly contains B103 instead of A103.
Electrical pin pitch, 10 kΩ value, ±20% tolerance, audio taper, 50 mW rating, and 1.2 mm terminal drills match.

Full findings: PTV09A-4020F-A103 Part Audit.

Fix symbol and footprint

Correct footprint geometry

Improve symbol pins

Rename footprint asset

File quality issue

Files

Pins

Symbol

Layout

3D View

Pin Number

MH2

Pin Number

MH1

Pin Number

PTV09A-4020F-A103