Review all available part information (MPN, package, pin count, description, properties). If no datasheet URL is already set, search the web for the official datasheet and update the part's Datasheet property with the URL. Then cross-check the schematic symbol, footprint, and pin descriptions against the datasheet. Summarize key specs and flag any mismatches.
I’ll audit the part metadata, find and attach the official datasheet if needed, then cross-check the symbol, footprint, and pin definitions against it and document any mismatches.
The official Sullins product page and drawing are identified. I’m attaching the official drawing URL now, then I’ll finish the dimensional and pin-by-pin comparison.
Overall status: Usable footprint with symbol metadata cleanup recommended.
The project represents a Sullins Connector Solutions PREC006SAAN-RC, a 6-position, single-row, straight, through-hole male header on 2.54 mm pitch. The official Sullins drawing was located and the missing Datasheet URL property was populated; Flux stores an ingested copy in the part property.
Reviewed project informationKey specifications
The following values were cross-checked against Sullins drawing 11635 and the official product information. The PDF was OCR-extracted by the datasheet reader; dimensions also match the exact inch-to-mm values used by the footprint.
Audit complete. I attached the official Sullins datasheet, verified the 6-pin 2.54 mm footprint—including exact 0.9906 mm drills—and found no footprint errors; the main mismatches are missing pin descriptions and all pins being typed Unspecified instead of Passive.
Overall status: Usable footprint with symbol metadata cleanup recommended.
The project represents a Sullins Connector Solutions PREC006SAAN-RC, a 6-position, single-row, straight, through-hole male header on 2.54 mm pitch. The official Sullins drawing was located and the missing Datasheet URL property was populated; Flux stores an ingested copy in the part property.
Reviewed project information
Table
Field
Project value
Review
Manufacturer part number
PREC006SAAN-RC
Match
Manufacturer
Sullins Connector Solutions
Match
Part type
Connector
Match
Description
6-position straight male pin header, 2.54 mm pitch, through-hole
Match
Pin count
6
Match
Designator prefix
J
Appropriate
Datasheet
Official Sullins drawing ingested into the Datasheet URL property
Updated
Package
1×6 unshrouded THT header
Match
Key specifications
The following values were cross-checked against Sullins drawing 11635 and the official product information. The PDF was OCR-extracted by the datasheet reader; dimensions also match the exact inch-to-mm values used by the footprint.
First-to-last contact centers: 12.70 mm (0.500 in)
Nominal overall body length: 15.24 mm (0.600 in)
Recommended PCB hole: 0.039 in = 0.9906 mm (drawing rounds metric display to 1.00 mm)
Current rating: 3 A per contact
Contact resistance: 20 mΩ maximum
Insulation resistance: 5000 MΩ minimum
Dielectric withstand: 1000 VAC
Operating temperature: −40°C to +105°C
Insulator: black PBT, UL94 V-0
Contacts: brass, tin plated
Processing: wave/manual soldering; manufacturer product data identifies this PBT version for solder processing
Footprint cross-check
Table
Feature
Datasheet requirement
Footprint
Status
Pad count
6
6
Match
Row count
1
1
Match
Pitch
2.54 mm
2.54 mm
Match
First-to-last centers
12.70 mm
12.70 mm
Match
Drill diameter
0.039 in / 0.9906 mm
0.9906 mm
Exact match
Copper pad diameter
Not specified by drawing
1.4986 mm
Reasonable 0.254 mm radial annular ring
Pin-1 marker
Required for orientation clarity
Rectangular pad 1 plus silk/fab marker
Match
Body length
15.24 mm nominal
Fab outline from −1.27 to 13.97 mm = 15.24 mm
Match
Body width
2.54 mm nominal
Fab outline 2.54 mm
Match
Mount type
Through-hole
Through-hole
Match
Footprint observations
The copper geometry and hole pattern accurately match the manufacturer drawing.
The courtyard extends about 0.254 mm beyond the nominal body on each side. This is modest but valid for a simple breakaway header; assembly-house courtyard preferences may require more clearance.
The footprint includes a 3D STEP model. No dimensional mismatch was identified from the available layout metadata.
The imported scene-tree readout displays some geometry in meters despite labeling it as millimeters; the underlying KiCad footprint payload confirms the correct millimeter dimensions.
Schematic symbol and terminal cross-check
Table
Item
Current implementation
Assessment
Terminal count
6
Correct
Terminal numbering
1 through 6
Correct and maps one-to-one to pads
Terminal names
Numeric names 1 through 6
Acceptable for an interchangeable pin header
Pin descriptions
Missing
Metadata mismatch / incomplete
Pin electrical type
Unspecified
Should preferably be Passive for all six contacts
Pin orientation/order
Six pins arranged sequentially on one side
Functional, though minimal
The datasheet does not assign electrical functions to individual contacts; all six contacts are equivalent passive conductors. Numeric pin names are therefore appropriate. However, each terminal should ideally have a description such as “Male header contact, position N” and electrical type Passive rather than Unspecified. This does not change connectivity or footprint mapping, but improves ERC behavior and library quality.
Flagged mismatches and risks
Pin Type is Unspecified on all six terminals. Recommended: set all to Passive.
Pin Description is absent on all six terminals. Recommended: add position-specific passive-contact descriptions.
Legacy ordering code risk. The -RC series is an older Sullins ordering format and may have lifecycle/replacement implications. Confirm current procurement availability before production.
Copper pad diameter is library-defined, not manufacturer-defined. The manufacturer specifies the hole pattern but not a copper land diameter. The present 1.4986 mm pad is manufacturable for typical processes, subject to the board fabricator’s annular-ring rules.
Conclusion
The footprint’s six-pad pattern, pitch, drill size, body outline, and pin-1 identification agree with the manufacturer drawing. No footprint correction is required. The only clear library-quality issues are incomplete terminal metadata: all pins should be Passive and should have descriptions.