Part Datasheet Audit
Review all available part information (MPN, package, pin count, description, properties). If no datasheet URL is already set, search the web for the official datasheet and update the part's Datasheet property with the URL. Then cross-check the schematic symbol, footprint, and pin descriptions against the datasheet. Summarize key specs and flag any mismatches.
Thought for 13 sec
I’ll audit the part metadata, locate the official manufacturer datasheet if needed, update the Datasheet property, then compare the symbol, footprint, and terminal descriptions against the published drawing.
Worked for 4 mins 51 sec
Created a project doc
OQ0912510000G Part Datasheet Audit
Reviewed current project metadata, the 9-terminal schematic symbol, imported KiCad footprint, and the stored manufacturer datasheet URL. Ser...
Audit complete. The 9-pin, 3.50 mm-pitch footprint geometry matches the datasheet, including 1.40 mm drills and 28.00 mm pin span; the existing Anytek datasheet URL was already populated, so it was not changed. Main issues: all symbol pins are
Unspecified instead of Passive, pin descriptions are missing, and the package property is absent.Full findings: OQ0912510000G Part Datasheet Audit
Fix metadata issues
Update datasheet URL
Run part review
Export audit package
Refine this doc
Ask about this doc
OQ0912510000G Part Datasheet Audit
Audit scope
Reviewed current project metadata, the 9-terminal schematic symbol, imported KiCad footprint, and the stored manufacturer datasheet URL.
Current part information
Table
| Field | Current value | Assessment |
|---|---|---|
| Manufacturer Part Number | OQ0912510000G | Matches the Amphenol Anytek OQ ordering code |
| Manufacturer | Amphenol | Correct at parent-company level; “Amphenol Anytek” is more specific |
| Part Type | Connector | Correct |
| Description | 9-position, 3.50 mm pitch, right-angle through-hole male pluggable terminal-block header; 300 V, 10 A; −40 °C to +115 °C | Consistent with the Amphenol Anytek product data located for this exact MPN |
| Designator Prefix | J | Appropriate for a connector |
| Pin count | 9 | Correct |
| Mount/package | Through-hole, single-row, right-angle header | Geometry supports this, but no explicit Package or Case Code property is set |
| Datasheet URL | http://www.anytek.com.tw/UserUpFiles/20120526/8J7FP6_r4sk_.pdf | Present, so no missing-URL update was required. It is an Anytek-hosted PDF, but uses HTTP rather than HTTPS |
Key specifications
- Series: OQ
- Connector: shrouded male PCB header for a pluggable terminal-block system
- Positions: 9, one row
- Pitch: 3.50 mm
- Orientation: right angle / 90 degrees
- Mounting: through-hole solder termination
- Rated voltage: 300 V
- Rated current: 10 A in Amphenol Anytek product data
- Operating temperature: −40 °C to +115 °C
- Housing: thermoplastic, UL94 V-0, green
- Contacts: copper alloy, tin plated
- Pin section: 0.80 mm square
- Recommended PCB drill: 1.40 mm diameter
- Nine-position pin span: 28.00 mm
- Overall body length: 32.90 mm nominal
- Body height: 9.20 mm nominal
- Body depth: approximately 7.0 mm
- Ordering-code interpretation: OQ series, 09 contacts, 3.5 mm pitch, green, closed body, right-angle PCB mounting, standard option, RoHS-compliant suffix G
Schematic symbol cross-check
Matches
- Exactly nine terminals are present.
- Terminal numbers are unique and sequential from 1 through 9.
- A passive connector symbol is electrically appropriate because all contacts are equivalent conductors.
Mismatches / omissions
- Every terminal has
Pin Type: Unspecified; these should bePassivefor a terminal-block header. - Pin Description is absent for all nine terminals. Suggested descriptions:
Contact 1throughContact 9, orMale header contact 1throughMale header contact 9. - The terminal records expose no pin name in the inspection output. Number-only naming is acceptable for this connector, but explicit descriptions would improve reuse and review.
Footprint cross-check
Matches
- Nine through-hole pads are present.
- Pad centers are spaced exactly 3.50 mm apart.
- Total center-to-center span is 28.00 mm, matching an N=9 connector.
- Drill diameter is 1.40 mm, matching the recommended PCB pattern.
- Pad 1 is rectangular and pads 2–9 are circular, giving clear pin-1 identification.
- Footprint body outline is 32.90 mm long and 9.20 mm deep/high in the imported drawing, matching the datasheet dimensions.
- Pin row position and the approximately 7 mm right-angle body depth are consistent with the mechanical drawing.
- A 3D STEP model is assigned.
Risks / omissions
- Copper pad diameter is 2.10 mm. The located datasheet specifies the 1.40 mm drill and 0.80 mm square pin, but does not clearly prescribe a copper-land diameter in the extracted drawing. The 0.35 mm annular ring is manufacturable, but the land diameter cannot be claimed as an exact datasheet match without a clearer authoritative land-pattern callout.
- The footprint has no explicit assembly outline or documented mating-side keepout beyond Fab/Silk/Courtyard geometry.
- The imported footprint description contains
OQ0912510000G-3, which appears to be a generator/source label rather than the exact MPN description; this is cosmetic.
Datasheet/source caveats
- The stored URL is already populated and is hosted on Anytek’s domain, so it satisfies the requested missing-datasheet check.
- The same PDF produced one OCR fragment with 250 V, 2.5 A, and −55 °C to +105 °C. That fragment conflicts with the exact-MPN product data and likely belongs to another drawing/page in a multi-product PDF. It should not be used for this MPN.
- Exact-MPN distributor/manufacturer-indexed data consistently identifies OQ0912510000G as 300 V, 10 A, and −40 °C to +115 °C.
- On-Shore Technology lists a similarly coded OSTOQ091251S family member at 300 V and 8 A. That is a related On-Shore part, not evidence that the Amphenol Anytek OQ0912510000G rating should be changed.
Overall result
The pin count and core footprint geometry match the OQ0912510000G mechanical requirements. The principal correctness gaps are schematic metadata: all nine pin types are unspecified and all pin descriptions are missing. Part metadata would also benefit from a specific package/case description and the more precise manufacturer name
Amphenol Anytek. No footprint defect severe enough to make the part unusable was identified.Audit scope
Current part information
Key specifications
Schematic symbol cross-check
Matches
Mismatches / omissions
Footprint cross-check
Matches
Risks / omissions
Datasheet/source caveats
Overall result
