Part Audit Review

A

adrian95

Review all available part information (MPN, package, pin count, description, properties). If no datasheet URL is already set, search the web for the official datasheet and update the part's Datasheet property with the URL. Then cross-check the schematic symbol, footprint, and pin descriptions against the datasheet. Summarize key specs and flag any mismatches.

flux

I’ll audit the part metadata, source the official datasheet if needed, verify symbol/footprint/pin details against it, and update the Datasheet property when missing.
Created a project doc

NZ2520SDA Part Audit

View Document
Audit of the current Flux part metadata, schematic symbol, terminal descriptions, and PCB footprint against NDK's current official NZ2520SDA...

flux

Audit complete. The 4-pin symbol and 1.0 × 1.0 mm pad footprint match NDK’s land pattern, but pin types/descriptions and several metadata fields are missing; the stored datasheet is also older (20–50 MHz) than NDK’s current revision (20–54 MHz). No Datasheet property was changed because one was already set.
Full findings: NZ2520SDA Part Audit.
Fix metadata and review
Update datasheet URL
Add pin metadata
Add part properties
Run part review
Sign up to send

Files

Pins

Symbol

Layout

3D View

STAND-BY
Pin Number
1
VCC
Pin Number
4
OUTPUT
Pin Number
3
GND
Pin Number
2
Name
Pin #
Type
Section
Pin Group
Orientation
Order
Sub-symbol
STAND-BY
1
Unspecified
GND
2
Unspecified
OUTPUT
3
Unspecified
VCC
4
Unspecified

NZ2520SDA