Datasheet Part Audit
Review all available part information (MPN, package, pin count, description, properties). If no datasheet URL is already set, search the web for the official datasheet and update the part's Datasheet property with the URL. Then cross-check the schematic symbol, footprint, and pin descriptions against the datasheet. Summarize key specs and flag any mismatches.
Thought for 1 min 35 sec
I’ll audit the part metadata, locate and attach the official datasheet if missing, then verify the symbol pins and footprint against the manufacturer documentation and report any discrepancies.
Worked for 7 mins 23 sec
Reviewed the official Neutrik documentation for NE8FBV-C5-LED; a datasheet was already attached, so no property update was required.
- Verified: MPN, vertical through-hole CAT5e RJ45 receptacle description, eight contacts plus G, two mechanical holes, and pin numbering agree with the manufacturer drawing.
- Key specs: 1.5 A/contact, ≤57 V, 1–100 MHz, IEEE 802.3bt Type 4/Class 8 (100 W), >1,000 mating cycles, −30°C to +80°C, 25.1 × 28.7 × 24 mm body, 3 mm maximum panel thickness.
- Flagged: All nine schematic terminals lack useful Pin Description metadata. Pins 1–8 should be described as RJ45 contacts and G as the connector shield/chassis terminal; G is currently typed “Power In,” which is less appropriate than a passive/shield classification. No confirmed footprint mismatch was found.
Fix metadata and review
Fix pin metadata
Run design review
Check footprint details
Prepare manufacturing files
