Pin Function Grouping

flux

Grouped and verified all 24 pins:
  • Power: 3V3 (VCC), Ground (GND)
  • SPI Interface: control and data I/O
  • Control: reset
  • Reserved: no-connect and do-not-use pins
Pin numbers and footprint mappings were preserved.
A

adrian95

Separate GND from Power Group, make a Ground Group

flux

GND is now separated into its own Ground section and Ground pin group.
A

adrian95

Assign a Terminal Order from 1 to 10, starting with Power. Power should be Terminal Order 1, and Ground should be last, Terminal Order 10. For Orientation, set Power to "Top" and Ground to "Bottom." For the remaining sections/groups, you may decide the Terminal Order and Orientation yourself. For Orientation, distribute them between "Left" and "Right" — don't put everything on one side. Each group/section should have a different orientation.

flux

I’ll organize the symbol into ten ordered functional groups: Power first, Ground last, and the signal/reserved groups split evenly across the left and right sides.

flux

Assigned and verified Terminal Orders 1–10:
  • Power: 1, Top
  • Orders 2–5: Left
  • Orders 6–9: Right
  • Ground: 10, Bottom
All pins are grouped consistently with their assigned orientation.
Verify symbol arrangement
Set pin electrical types
Review BGA footprint
Add pin descriptions
Sign up to send

Files

Pins

Symbol

Layout

3D View

MX66L2G45GXRI00