Part Datasheet Review and Cross-Check
Thought for 4 sec
I’ll inspect the part metadata, find and set the official datasheet if it’s missing, then compare the symbol/footprint/pin descriptions against the source and report any mismatches.
Worked for 46 sec
The part already has a JAE datasheet URL set, so I’ll use that as the source of truth and continue with the cross-check.
Worked for 3 mins 54 sec
Reviewed MX44006NF1 against the JAE MX44 datasheet; the Datasheet URL was already set, so no property update was needed. Key findings and full spec notes are in MX44006NF1 Datasheet Cross-Check.
Open items:
- Symbol pin descriptions are missing, and pin types are currently
Unspecified. - Footprint visually matches the expected 6 contacts + 2 mounting holes, but exact pad/hole dimensions were not exposed for numeric verification.
Suggested next steps:
- Update pin descriptions and pin types to match connector contact usage.
- Numerically verify/edit the footprint hole diameters and 3.5 mm pitch if pad geometry editing is available.
- Confirm PCB pad numbering orientation against the datasheet No.1 marking before release.
Fix pins and verify
Fix pin metadata
Verify footprint dimensions
Run ERC/DRC
Prepare manufacturing files
Refine this doc
Ask about this doc
MX44006NF1 Datasheet Cross-Check
Source reviewed
- Project:
MX44006NF1 - Manufacturer: JAE / Japan Aviation Electronics Industry
- Official Datasheet URL already set: https://www.jae.com/direct/topics/topics_file_download/topics_id=64799&ext_no=06&_lang=en&v=
- Web confirmation: official JAE product page lists MX44006NF1 as active/current and provides PDF download; distributor mirrors also host the JAE MX44 series PDF.
Current project metadata
- Manufacturer Part Number:
MX44006NF1 - Manufacturer Name:
JAE - Part Type:
Connectors - Description: compact waterproof automotive connector, 6 positions, 3.5 mm pitch, single row, pin header
- Designator Prefix:
J - Datasheet URL: set to JAE direct PDF URL
- Schematic terminals: 6 terminal components numbered 1 through 6
- PCB layout: 6 signal pads plus 2 mounting/board-lock holes (
MH1,MH2) and connector outline/silkscreen
Key datasheet specs extracted
Table
| Spec | Datasheet value |
|---|---|
| Series | JAE MX44 |
| Part | MX44006NF1 |
| Connector type | Right-angle / angle pin header |
| Positions | 6 |
| Rows | 1 |
| Pitch | 3.5 mm |
| Rated current | 3 A |
| Operating temperature | -40°C to +125°C |
| Waterproof rating | 98 kPa min initial; distributor attributes list waterproof ingress protection |
| Contact resistance | 5 mΩ max initial; 10 mΩ max after test |
| Insulation resistance | 100 MΩ min |
| Applicable PCB thickness | 1.6 mm |
| Contact hole diameter | Ø1.1 +0.1/0 mm or Ø1.1 ±0.1 mm depending drawing source/OCR |
| Board-lock hole diameter | Ø2.2 +0.1/0 mm or Ø2.2 ±0.1 mm depending drawing source/OCR |
| Contact pitch tolerance | 3.5 ±0.05 mm |
| Dimension table for 6-pos | A=17.5 mm, B=21.7 mm, C=24.0 mm, D=27.8 mm |
| Materials | Glass-filled PBT insulator; brass contacts; tin plating |
| Compliance | RoHS 10 substances |
Symbol cross-check
- Pin count matches datasheet: project has pins/terminals 1-6 and datasheet part is 6-position.
- Numbering is consistent at a basic level: schematic terminal properties use pin numbers 1 through 6.
- Datasheet numbering note: when viewing the mating face/front drawing, the order across the face is
6 5 4 3 2 1, with No. 1 marked at the rightmost contact. - Current symbol pin descriptions are missing/undefined; pins only have
Pin Type: Unspecifiedand no meaningful connector/contact descriptions.
Footprint cross-check
- Layout includes six pads and two mounting holes, matching the datasheet requirement for 6 contacts plus 2 board-lock holes.
- Silkscreen/body outline appears to span approximately 24.0 mm wide by 23.3 mm deep, consistent with the datasheet body/mechanical dimensions C=24.0 mm and 23.3 mm shown in the drawing.
- Footprint visual inspection shows connector outline and pin-1 marker present.
- The current inspection output did not expose exact copper pad diameters/locations for the six pads and mounting holes, so I could not numerically verify Ø1.1 contact holes, Ø2.2 board-lock holes, 3.5 mm pitch, 17.5 mm outer span, or board-edge offsets from layout data.
Mismatches / risks flagged
- Pin descriptions are absent: schematic terminals have undefined pin entries and no
Pin Descriptionvalues. - Pin types are generic/unspecified: connector terminals should normally be passive/contact pins rather than
Unspecified. - Footprint geometry could not be fully numerically audited because the layout inspection did not expose pad dimensions/coordinates; visually it has the expected 6 pads, 2 mount holes, outline, and pin-1 marker.
- Verify physical pin orientation before release: datasheet face view orders contacts
6 5 4 3 2 1, so PCB pad numbering must match the actual right-angle header orientation and No.1 mark.
Recommended cleanup
- Add
Pin Descriptionvalues such asConnector contact 1throughConnector contact 6. - Set connector terminal
Pin TypetoPassiveor equivalent contact/signal classification. - If the platform exposes editable footprint pad rules, verify or set contact holes to Ø1.1 mm, board-lock holes to Ø2.2 mm, contact pitch to 3.5 mm, and outer contact span to 17.5 mm.
Source reviewed
Current project metadata
Key datasheet specs extracted
Symbol cross-check
Footprint cross-check
Mismatches / risks flagged
Recommended cleanup
