MIMX8ML2DVNLZAB Repair

Repair this MIMX8ML2DVNLZAB part project so it is safe for use in the Vitachrona main board. Use authoritative NXP i.MX 8M Plus datasheet, package/ball map, hardware design guide, and reference material. Inspect all 548 terminals and assign correct electrical types to every ball: Ground for all VSS/GND domains, Power In for supply inputs, Power Out only for genuine generated/reference outputs, Input/Output/Bi-Directional/Open Collector/Passive as appropriate for reset, boot, clocks, DDR, USB, MIPI, eMMC, GPIO and analog functions. Preserve exact ball numbers, functional names, and one-to-one footprint mapping. Correct malformed/truncated names if present. Organize the schematic into functional sub-symbols (Power/Ground, DDR, USB/MIPI, eMMC, GPIO/peripherals, clocks/boot/debug) without changing physical mappings. Verify the existing 548-pad 15x15 mm 0.5 mm-pitch footprint, package geometry, pad separation, pin-1 orientation and 3D scale. Do not invent pin functions; record any ball whose authoritative type cannot be established. Publish/update the part when complete and report the resulting part UID/version, counts by electrical type, verification evidence, and any blockers. Edit only this active part project.

Thought for 6 sec

flux

I’ll audit the 548-ball part against authoritative NXP documentation, then correct the symbol, terminal types, sub-symbol organization, footprint, and 3D model before publishing. I’ll preserve every physical ball mapping and explicitly flag any unverifiable terminal; first I’m checking editability and the current part state.

Worked for 2 mins 1 sec

flux

Blocked by permissions: your access to the active silicon-yard/mimx8ml2dvnlzab part project is view-only, so I could not safely edit or publish it.

Current part UID: e1481b81-d5bc-426e-b59e-7859583a95ff
548 terminals and 548 pads are present, but all 548 terminal types are Unspecified
Functional sub-symbols are not configured
Metadata incorrectly references i.MX 8M Mini / 486-ball / 0.8 mm, conflicting with the FCBGA548 15 × 15 mm, 0.5 mm footprint
Existing assets: 548-pad KiCad footprint, STEP model, and SVG symbol
I filed an internal part-quality report; no mappings or files were changed

The project owner must grant you edit/publish access, or perform the repair from an authorized account. Once access is updated, I can complete the authoritative ball-by-ball audit and publish the corrected version.

Request repair access

Audit read-only

Create owned fork

Check main board risk

Files

Pins

Symbol

Layout

3D View

MIMX8ML2DVNLZAB