I’ll review the part metadata, find and set the official datasheet if needed, then compare the symbol/footprint/pin details against the datasheet and report any mismatches.
I found the official SGX Sensortech datasheet and confirmed the current library part has no symbol pins and no datasheet set. I’m updating the datasheet link now, then I’ll finish the cross-check report.
Completed the MICS-5914 review and set the official SGX Sensortech datasheet URL in the project properties. I created the detailed review in Part Review - MICS-5914.
Open items:
The description incorrectly mentions CO detection; MiCS-5914 is primarily an NH3/ammonia sensor.
Terminals are A–J including I, but the datasheet uses A, B, C, D, E, F, G, H, J, K.
Pin descriptions/types are missing for C=Rh1, D=Rs1, F=Rh2, G=Rs2.
Suggested next steps:
Fix terminal labels and pin descriptions.
Correct the part description.
Verify footprint orientation against the datasheet bottom-view pin diagram.