Part Datasheet Audit

flux

Audit status
Completed. No project mutation was made. The exact existing Datasheet URL is already populated, so no in-place update was necessary.
Identity and official source
The internal names CONN5_M50C5M00_4 and CONN5_M50C5M00_VIC are CAD/library identifiers, not valid manufacturer order codes.
Property and description inventory
Project properties
  • Manufacturer Part Number: CONN5_M50C5M00_4
  • Designator Prefix: J
  • Part Type: Connectors
  • Project description: CONN5_M50C5M00_4
Published-part properties
  • Manufacturer Part Number: CONN5_M50C5M00_4
  • Manufacturer Name: Power Supply
  • Datasheet URL: official Vicor URL above
  • Part Type: Connectors
  • Connector Type/subtype: Power Connectors
  • Designator Prefix: J
  • Symbol Style: parametric-v1
  • Mount: Chassis
  • Package/case: Module
  • Terminal count: 5
  • No machine datasheet or 3D model is present.
The published description identifies the device as a Vicor 28V/22A MIL-COTS EMI filter in a chassis-mount 1714 ChiP package, which is substantially more accurate than the project description.
Symbol and terminals
Rendered symbol: generic rectangular, five-pin parametric symbol.

Table

TerminalSymbol labelTypeDescription
11UnspecifiedMissing
22UnspecifiedMissing
33UnspecifiedMissing
44UnspecifiedMissing
55UnspecifiedMissing
  • Display arrangement: pins 1/3/5 on the left; 2/4 on the right.
  • All terminals lack Pin Group, Pin Orientation, Section and Terminal Order metadata; the part-review check confirmed these omissions.
  • Official functional terminals are +IN, −IN, EMI GND, +OUT, −OUT, with corresponding power/input/output-return descriptions.
  • The Vicor datasheet labels terminals by function and physical position but does not provide a complete 1–5 numeric mapping. Therefore, the project’s numeric-only mapping cannot be conclusively validated.
  • The symbol does not communicate polarity, input/output side, or EMI-ground function.
Footprint audit
Footprint asset: MFM1714V50M50C5M00.kicad_mod.
Electrical pads
  • Five circular plated through-hole pads.
  • Coordinates in mm:
    • 1: (0, 0)
    • 2: (0, 12.029001)
    • 3: (0, 24.058001)
    • 4: (35.452, 0)
    • 5: (35.452, 24.058001)
  • Pad diameter: 3.6322mm
  • Drill: 3.1242mm
  • Copper and mask on both sides; no paste, appropriate for through-hole pads.
Mounting pads
  • Two plated through-hole circular pads:
    • 6: (17.726, −2.831)
    • 7: (17.726, 26.889001)
  • Center spacing: 29.720001mm
  • Pad diameter: 4.953mm
  • Drill: 4.445mm
  • Copper/mask both sides; no paste.
Outlines
  • Fab rectangle: 44.6024 × 35.56mm
  • Silk rectangle: 44.8564 × 35.814mm
  • Courtyard rectangle: 45.1104 × 36.068mm
  • Line width: 0.1524mm
  • Pin-1 markers exist on fab and both top/bottom silk.
  • Reference and value overlap at the footprint center.
  • No 3D model is attached.
Mismatches and unresolved risks
  1. Critical identity/footprint variant mismatch: exact MPN MFM1714V50M50C5M00 is the chassis/lug-mount variant, but the footprint implements the datasheet’s PCB board-mount hole pattern. The PCB-mount orderable variants are MFM1714B50M50C5M04 and ...M08, not the V...M00 part.
  2. Stored MPN is incorrect: CONN5_M50C5M00_4 instead of MFM1714V50M50C5M00.
  3. Stored manufacturer is incorrect: Power Supply instead of Vicor Corporation.
  4. Part Type Connectors is misleading; this is an EMI input filter/power module, not a connector.
  5. Project description is only an internal identifier.
  6. Symbol pin names, types and descriptions do not represent the five official functions.
  7. Numeric pin-to-function mapping remains unresolved because the official datasheet primarily uses functional labels and location rather than a full numeric table.
  8. Footprint drills differ from the official recommended board pattern:
    • Electrical holes: footprint 3.1242mm vs datasheet 3.048 ± 0.076mm
    • Mounting holes: footprint 4.445mm vs datasheet 4.369 ± 0.076mm
  9. Datasheet board pattern calls out annular-ring requirements that are not clearly met by the footprint’s relatively small copper diameters.
  10. Imported layer geometry appears conflated in Flux: the “Silk Shapes” asset includes both courtyard and silk rectangles; the source KiCad payload distinguishes F.CrtYd, F.SilkS, and F.Fab.
  11. No explicit solder-mask expansion rules are stored; mask behavior is inherited.
  12. No 3D model is available for mechanical confirmation.
Per scope, none of these mismatches were altered.
Created a project doc

Part Datasheet Audit

View Document
The project is for a Vicor LV/MIL-COTS MFM EMI input filter module, but its stored identity and footprint variant are inconsistent. The offi...

flux

Audit complete. The official Vicor datasheet was already set, so no URL update was needed. The main issue is critical: the stored chassis-mount MPN MFM1714V50M50C5M00 conflicts with a PCB-mount footprint; metadata, pin functions, drill sizes, and annular rings also need correction.
Full findings: Part Datasheet Audit.
Fix metadata and footprint
Use board-mount variant
Use chassis variant
Update symbol pins
Check manufacturability
2
Pin Number
2
1
Pin Number
1
4
Pin Number
4
  • Generic Inductor
    Generic Inductor
    A generic fixed inductor suitable for rapid circuit topology development. The footprint automatically adapts based on the selected package, supporting standard SMD sizes (e.g., 0402, 0603, 0805) as well as well-known inductor packages such as SDR1806, PA4320, SRN6028, and SRR1260. Standard inductor values: 1.0 nH, 10 nH, 100 nH, 1.0 µH, 10 µH, 100 µH, 1.0 mH 1.2 nH, 12 nH, 120 nH, 1.2 µH, 12 µH, 120 µH, 1.2 mH 1.5 nH, 15 nH, 150 nH, 1.5 µH, 15 µH, 150 µH, 1.5 mH 1.8 nH, 18 nH, 180 nH, 1.8 µH, 18 µH, 180 µH, 1.8 mH 2.2 nH, 22 nH, 220 nH, 2.2 µH, 22 µH, 220 µH, 2.2 mH 2.7 nH, 27 nH, 270 nH, 2.7 µH, 27 µH, 270 µH, 2.7 mH 3.3 nH, 33 nH, 330 nH, 3.3 µH, 33 µH, 330 µH, 3.3 mH 3.9 nH, 39 nH, 390 nH, 3.9 µH, 39 µH, 390 µH, 3.9 mH 4.7 nH, 47 nH, 470 nH, 4.7 µH, 47 µH, 470 µH, 4.7 mH 5.6 nH, 56 nH, 560 nH, 5.6 µH, 56 µH, 560 µH, 5.6 mH 6.8 nH, 68 nH, 680 nH, 6.8 µH, 68 µH, 680 µH, 6.8 mH 8.2 nH, 82 nH, 820 nH, 8.2 µH, 82 µH, 820 µH, 8.2 mH #generics #CommonPartsLibrary
    jharwinbarrozo
    16.6k
  • Generic Capacitor
    Generic Capacitor
    A generic fixed capacitor ideal for rapid circuit topology development. You can choose between polarized and non-polarized types, its symbol and the footprint will automatically adapt based on your selection. Supported options include standard SMD sizes for ceramic capacitors (e.g., 0402, 0603, 0805), SMD sizes for aluminum electrolytic capacitors, and through-hole footprints for polarized capacitors. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard capacitor values: 1.0pF, 10pF, 100pF, 1000pF, 0.01uF, 0.1uF, 1.0uF, 10uF, 100uF, 1000uF, 10000uF 1.1pF, 11pF, 110pF, 1100pF 1.2pF, 12pF, 120pF, 1200pF 1.3pF, 13pF, 130pF, 1300pF 1.5pF, 15pF, 150pF, 1500pF, 0.015uF, 0.15uF, 1.5uF, 15uF, 150uF, 1500uF 1.6pF, 16pF, 160pF, 1600pF 1.8pF, 18pF, 180pF, 1800pF 2.0pF, 20pF, 200pF, 2000pF 2.2pF, 22pF, 220pF, 2200pF, 0.022uF, 0.22uF, 2.2uF, 22uF, 220uF, 2200uF 2.4pF, 24pF, 240pF, 2400pF 2.7pF, 27pF, 270pF, 2700pF 3.0pF, 30pF, 300pF, 3000pF 3.3pF, 33pF, 330pF, 3300pF, 0.033uF, 0.33uF, 3.3uF, 33uF, 330uF, 3300uF 3.6pF, 36pF, 360pF, 3600pF 3.9pF, 39pF, 390pF, 3900pF 4.3pF, 43pF, 430pF, 4300pF 4.7pF, 47pF, 470pF, 4700pF, 0.047uF, 0.47uF, 4.7uF, 47uF, 470uF, 4700uF 5.1pF, 51pF, 510pF, 5100pF 5.6pF, 56pF, 560pF, 5600pF 6.2pF, 62pF, 620pF, 6200pF 6.8pF, 68pF, 680pF, 6800pF, 0.068uF, 0.68uF, 6.8uF, 68uF, 680uF, 6800uF 7.5pF, 75pF, 750pF, 7500pF 8.2pF, 82pF, 820pF, 8200pF 9.1pF, 91pF, 910pF, 9100pF #generics #CommonPartsLibrary
    jharwinbarrozo
    1.5M
  • Generic Resistor
    Generic Resistor
    A generic fixed resistor ideal for rapid circuit topology development. Its footprint automatically adapts based on the selected package case code—supporting 0402, 0603, 0805, 1203, and many other standard SMD packages, as well as axial horizontal and vertical configurations. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard resistor values: 1.0 ohm, 10 ohm, 100 ohm, 1.0k ohm, 10k ohm, 100k ohm, 1.0M ohm 1.1 ohm, 11 ohm, 110 ohm, 1.1k ohm, 11k ohm, 110k ohm, 1.1M ohm 1.2 ohm, 12 ohm, 120 ohm, 1.2k ohm, 12k ohm, 120k ohm, 1.2M ohm 1.3 ohm, 13 ohm, 130 ohm, 1.3k ohm, 13k ohm, 130k ohm, 1.3M ohm 1.5 ohm, 15 ohm, 150 ohm, 1.5k ohm, 15k ohm, 150k ohm, 1.5M ohm 1.6 ohm, 16 ohm, 160 ohm, 1.6k ohm, 16k ohm, 160k ohm, 1.6M ohm 1.8 ohm, 18 ohm, 180 ohm, 1.8K ohm, 18k ohm, 180k ohm, 1.8M ohm 2.0 ohm, 20 ohm, 200 ohm, 2.0k ohm, 20k ohm, 200k ohm, 2.0M ohm 2.2 ohm, 22 ohm, 220 ohm, 2.2k ohm, 22k ohm, 220k ohm, 2.2M ohm 2.4 ohm, 24 ohm, 240 ohm, 2.4k ohm, 24k ohm, 240k ohm, 2.4M ohm 2.7 ohm, 27 ohm, 270 ohm, 2.7k ohm, 27k ohm, 270k ohm, 2.7M ohm 3.0 ohm, 30 ohm, 300 ohm, 3.0K ohm, 30K ohm, 300K ohm, 3.0M ohm 3.3 ohm, 33 ohm, 330 ohm, 3.3k ohm, 33k ohm, 330k ohm, 3.3M ohm 3.6 ohm, 36 ohm, 360 ohm, 3.6k ohm, 36k ohm, 360k ohm, 3.6M ohm 3.9 ohm, 39 ohm, 390 ohm, 3.9k ohm, 39k ohm, 390k ohm, 3.9M ohm 4.3 ohm, 43 ohm, 430 ohm, 4.3k ohm, 43K ohm, 430K ohm, 4.3M ohm 4.7 ohm, 47 ohm, 470 ohm, 4.7k ohm, 47k ohm, 470k ohm, 4.7M ohm 5.1 ohm, 51 ohm, 510 ohm, 5.1k ohm, 51k ohm, 510k ohm, 5.1M ohm 5.6 ohm, 56 ohm, 560 ohm, 5.6k ohm, 56k ohm, 560k ohm, 5.6M ohm 6.2 ohm, 62 ohm, 620 ohm, 6.2k ohm, 62K ohm, 620K ohm, 6.2M ohm 6.8 ohm, 68 ohm, 680 ohm, 6.8k ohm, 68k ohm, 680k ohm, 6.8M ohm 7.5 ohm, 75 ohm, 750 ohm, 7.5k ohm, 75k ohm, 750k ohm, 7.5M ohm 8.2 ohm, 82 ohm, 820 ohm, 8.2k ohm, 82k ohm, 820k ohm, 8.2M ohm 9.1 ohm, 91 ohm, 910 ohm, 9.1k ohm, 91k ohm, 910k ohm, 9.1M ohm #generics #CommonPartsLibrary
    jharwinbarrozo
    1.5M
  • Terminal
    Terminal
    An electrical connector acting as reusable interface to a conductor and creating a point where external circuits can be connected.
    natarius
  • RMCF0805JT47K0
    RMCF0805JT47K0
    General Purpose Thick Film Standard Power and High-Power Chip Resistor 47 kOhms ±5% 0.125W, 1/8W Chip Resistor 0805 (2012 Metric) Automotive AEC-Q200 Thick Film Features: - RMCF – standard power ratings - RMCP – high power ratings - Nickel barrier terminations standard - Power derating from 100% at 70ºC to zero at +155ºC - RoHS compliant, REACH compliant, and halogen free - AEC-Q200 compliant
    jharwinbarrozo
    1.2M
  • 875105359001
    875105359001
    10 µF 16 V Aluminum - Polymer Capacitors Radial, Can - SMD 30mOhm 2000 Hrs @ 105°C #commonpartslibrary #capacitor #aluminumpolymer #radialcan
    jharwinbarrozo
    1.2M
  • CTL1206FYW1T
    CTL1206FYW1T
    Yellow 595nm LED Indication - Discrete 1.7V 1206 (3216 Metric)
    jharwinbarrozo
    1.1M
  • 1070TR
    1070TR
    Battery Holder (Open) Coin, 20.0mm 1 Cell SMD (SMT) Tab bate or batt #forLedBlink
    jharwinbarrozo
    700.5k
  • Push Button
    Push Button
    A momentary or non-latching switch which causes a temporary change in the state of an electrical circuit only while the switch is physically actuated. SWITCH TACTILE SPST-NO 0.05A 24V
    jharwinbarrozo
    490.7k
  • XY301V-A-5.0-3P
    XY301V-A-5.0-3P
    Straight 3 pin 5mm 3-pin Pitch 5mm 15A 1.5 300V Screw terminal block 01x03 #screwblock #connector #commonPartsLibrary
    jharwinbarrozo
    537.9k

MFM1714V50M50C5M00

MFM1714V50M50C5M00 thumbnail
EMI Input Filter Module – High-performance EMI input filter module designed for Vicor DC-DC converter modules in military, aerospace, defense, industrial automation, telecommunications, and high-reliability embedded power systems. Optimized for 28 V input power buses, it supports up to 22 A continuous output current and is designed to help power systems meet MIL-STD-461 conducted EMI requirements while also supporting MIL-STD-704 and MIL-STD-1275 transient compliance when used with compatible Vicor converters. Features low insertion loss, high common-mode and differential-mode noise attenuation, low-profile ChiP® package construction, and environmental screening for rugged applications. Housed in a 1714 ChiP package (44.6 × 35.5 × 9.2 mm) with a chassis-mount configuration, it is intended for use with Vicor MIL-COTS™ power modules in demanding environments.
#Vicor #MFM1714V50M50C5M00 #MFM1714 #EMIFilter #InputFilter #PowerFilter #MILCOTS #MILSTD461 #PowerManagement #DCDCConverter #EmbeddedPower #EmbeddedSystems

Properties

CONN5_M50C5M00_4

Power Supply

Connectors

vicorpower.com/documents/datasheets/ds_MFM1714x50M50C5yzz.pdf

J

parametric-v1

Pricing & Availability

No results found.

Controls