Pin Function Grouping

A

adrian95

can you group together pins by their functions?
(for example for Power, 3v3, Ground for gnd etc)

flux

I’ll inspect the LT4363 pin definitions, assign functional groups (power, ground, gate/control, sensing, timing/status), and verify the updated symbol organization.

flux

Grouped all 13 pins by function:
  • Power: VCC
  • Ground: GND and exposed pad
  • Sensing: FB, OUT, SNS
  • Control: SHDN, UV, OV, TMR
  • Outputs: GATE, FLT, ENOUT
Also assigned appropriate pin orientations, electrical types, and deterministic ordering.
A

adrian95

Assign a Terminal Order from 1 to 10, starting with Power. Power should be Terminal Order 1, and Ground should be last, Terminal Order 10. For Orientation, set Power to "Top" and Ground to "Bottom." For the remaining sections/groups, you may decide the Terminal Order and Orientation yourself. For Orientation, distribute them between "Left" and "Right" — don't put everything on one side. Each group/section should have a different orientation.

flux

Assigned Terminal Orders 1–10:
  • 1: Power — Top
  • 2–9: Functional groups alternating Left/Right
  • 10: Ground — Bottom
Split FLT and ENOUT into separate groups so all ten functional order positions are represented.
Verify symbol layout
Add pin descriptions
Review terminal metadata
Sign up to send

Files

Pins

Symbol

Layout

3D View

LT4363HDE-2#PBF