Pin Function Grouping
Thought for 7 sec
There are 14 pins but only 10 Terminal Order values, so some pins must share an order as grouped rows.
Should I create 10 pin groups, with:
- Power = order 1, orientation Top
- Ground = order 10, orientation Bottom
- Eight intermediate groups using alternating Left/Right orientations?
This also requires separating GND from the current Power section.
don't include the GND into the Power group make a separate for it
Thought for 9 sec
I’ll separate Ground from Power, create 10 ordered pin groups, and distribute the intermediate groups across the left and right sides.
Worked for 1 min 29 sec
GND is now a separate Ground section/group:
- Power: order 1, Top
- Intermediate groups: orders 2–9, distributed Left/Right
- Ground: order 10, Bottom
All 14 pins remain intact and correctly grouped.
Review symbol layout
Refine pin group names
Check terminal properties
