Pin Function Grouping

A

adrian95

Assign a Terminal Order from 1 to 10, starting with Power. Power should be Terminal Order 1, and Ground should be last, Terminal Order 10. For Orientation, set Power to "Top" and Ground to "Bottom." For the remaining sections/groups, you may decide the Terminal Order and Orientation yourself. For Orientation, distribute them between "Left" and "Right" — don't put everything on one side. Each group/section should have a different orientation.

flux

I’ll normalize the pins into 10 ordered functional groups: Power first, Ground last, with the eight intermediate groups alternating between Left and Right orientations. Then I’ll verify all 33 terminals.

flux

The 10-group ordering and orientations are applied. I’m checking the rendered symbol and pin table now.

flux

Verifying the final pin order and side distribution.

flux

Assigned and verified all 33 pins across 10 functional groups:
  • 1 Power — Top
  • 2 Clock — Left
  • 3 Reset — Right
  • 4 GPIO — Left
  • 5–9 RF/DNC — alternating Right/Left
  • 10 Ground — Bottom
Pin numbers and mappings remain unchanged.
Set pin electrical types
Improve symbol readability
Review footprint mapping
Add pin descriptions
Sign up to send

Files

Pins

Symbol

Layout

3D View

LR1110IMLTRT